{"product_id":"sonax-profiline-schaumpad-medium-polierpad","title":"PROFILINE Foam Pad medium polishing pad","description":"\u003ch2\u003eMedium Cut Performance with Optimal Control — SONAX PROFILINE FoamPad medium\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does a medium-hard polishing pad achieve, and when is it the right choice? The medium-hard FoamPad from SONAX's PROFILINE range is the most versatile pad in the polishing system — it delivers sufficient cutting power for most signs of wear and holograms, leaves finer residue marks than a hard pad, and is suitable for both rotary and orbital polishers.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen selecting pads for paint preparation, many users face the question of whether to choose an aggressive cutting pad or a gentle finishing pad. For the vast majority of preparation tasks, the answer lies somewhere in the middle — and this middle ground is precisely what the \u003cstrong\u003eSONAX PROFILINE FoamPad medium\u003c\/strong\u003e occupies. A medium-hard foam pad delivers enough cutting power to remove normal holograms, fine scratches from car washes, and light oxidation, without being so aggressive that residue marks require a complex follow-up step. The FoamPad medium is the pad that suffices as the only cutting pad in 70–80% of all vehicle detailing jobs. Available in Ø75 mm for rotary polishers and Ø150 mm for standard orbital machines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium foam hardness for a wide range of applications between cut and finish.\u003c\/strong\u003e The FoamPad medium fills the gap between the aggressive FoamPad hard and the gentle FoamPad soft: It is hard enough to remove holograms and water spot marks, yet soft enough that the residue marks in the clear coat are so fine that a single finishing pass with a soft pad completely eliminates them. In easily accessible cases with light contamination and modern, easy-to-polish clear coat formulations, no finishing step is even necessary after the FoamPad medium — directly to sealing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile for use on rotary and orbital polishers.\u003c\/strong\u003e The Ø75 mm pad is designed for the smaller backing plate of rotary polishers; the Ø150 mm pad for standard DA orbital machines. This division allows the same concept — medium-hard foam structure for balanced cut\/finish performance — to be transferred to both machine types. The medium pad achieves slightly more cut on the rotary polisher due to higher rotational energy than on the orbital; on the orbital, the application is safer for beginners because overheating risks are minimized by the randomized stroke.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEconomical all-round solution for businesses with a mixed vehicle fleet.\u003c\/strong\u003e Not every vehicle needs a hard cutting pad, and not every vehicle can be sufficiently treated with a pure finishing pad. A medium-hard pad as standard equipment in the shop reduces complexity: For new vehicles without severe defects, the FoamPad medium is sufficient as the sole processing pad; for vehicles with light to medium defects, it is the primary cutting pad; only for heavily damaged paints is the FoamPad hard or the HybridWollPad used. This staggered system saves pad changing time in the shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The FoamPad medium is excellent for the one-step approach on modern vehicles: Combine cut and finish in a single pass with a cut+finish polish (like the \u003ca href=\"\/en\/products\/sonax-profiline-cut-finish-einstufen-politur\"\u003eSONAX PROFILINE Cut+Finish \"5\/5\" One-Step Polish\u003c\/a\u003e) on the FoamPad medium — this saves time compared to the two-step process and delivers very good results on modern soft clear coat formulations. This approach works particularly well on vehicles from the last 10 years with good factory condition and normal signs of use. For heavily damaged paints or vehicles with deep sanding marks, the multi-step process with FoamPad hard for the first cutting pass remains the more reliable approach.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFoamPad medium Foam Structure — Medium-hard Cell Structure and Polishing Behavior\u003c\/h3\u003e\n\n\u003cp\u003eThe foam hardness of the \u003cstrong\u003eSONAX PROFILINE FoamPad medium\u003c\/strong\u003e lies between the values of the FoamPad hard and FoamPad soft: a medium-open cell structure that offers sufficient resistance to bring abrasive particles in the polishing compound to the paint surface with effective cutting energy, but at the same time shows enough flexibility to evenly cover contoured surfaces like fender curves and door panels. This balance between stiffness and adaptability is what makes the medium-hard pad the most versatile polishing pad in the entire PROFILINE range.\u003c\/p\u003e\n\n\u003cp\u003eThe cell structure of the FoamPad medium is designed to release polish evenly from the interior of the foam to the polishing front — an effect that foam pad technicians refer to as the \"reservoir effect\": the foam absorbs polish during the initial application and continuously releases it outwards during polishing. This leads to a more even distribution of polish over the entire panel surface than if the polish were only on the pad surface. This effect is particularly noticeable on larger panels like hoods and roofs: The cutting performance remains more consistent throughout the entire panel pass than with a completely closed-cell hard pad.\u003c\/p\u003e\n\n\u003cp\u003eThe rebound resilience — i.e., how quickly the foam returns to its shape after compression — is designed for medium machine frequencies with the FoamPad medium. This makes it compatible with both rotary polishers (constant rotation frequency) and DA orbital polishers (randomized stroke frequency), without performing significantly worse for either machine type. This machine agnosticism is a practical advantage in operations where different machine types are used and pads are not to be sorted machine-specifically.\u003c\/p\u003e\n\n\u003cp\u003eImportant for practical use: Briefly moisten new FoamPads medium before the first use and \"break them in\" once — the first few seconds on the first panel are for conditioning the foam, after which the pad operates at its full performance level. This brief break-in step ensures that the foam core absorbs the polish evenly and the reservoir effect works from the start. An unconditioned new pad will absorb polish in the first few passes without releasing enough onto the paint surface — the result is an uneven first panel that does not provide a realistic assessment of the pad-polish combination.\u003c\/p\u003e\n\n\u003cp\u003eAn aspect often underestimated with medium-hard pads: The effective cutting performance of a FoamPad medium is highly dependent on the cutting strength of the polish used. With a heavy-cut polish like the CutMax \"6\/4\", the FoamPad medium delivers surprisingly much cut — sufficient for many medium-heavy preparation tasks without having to switch to the aggressive FoamPad hard. With a lighter finish polish, the cut is reduced accordingly to a finish level. The user thus has a direct influence on the effective cut\/finish ratio through the choice of polish — an advantage that a hard or soft pad does not offer with this flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of the FoamPad medium — Polish Selection, Machine Technique and Pad Care\u003c\/h3\u003e\n\n\u003cp\u003eThe most versatile application combination for the FoamPad medium in the PROFILINE system is the medium-hard pad with a one-step polish like the \u003ca href=\"\/en\/products\/sonax-profiline-cut-finish-einstufen-politur\"\u003eSONAX PROFILINE Cut+Finish \"5\/5\"\u003c\/a\u003e — this combination covers the broad middle ground of detailing tasks. For vehicles with more severe defects, the FoamPad medium with the CutMax \"6\/4\" is recommended as a first step, followed by a FoamPad soft with a finish polish for the final high gloss.\u003c\/p\u003e\n\n\u003cp\u003eMachine choice and speed: On the rotary polisher, the FoamPad medium works optimally at 900–1,200 rpm — sufficient rotational energy for effective cutting performance without excessive heat generation. On the DA orbital polisher, the medium power level (level 3–4) is the correct setting to keep the medium-hard foam material in its optimal working range. Too low a speed leads to \"smearing\" — the polish is distributed but not effectively converted into cutting performance. Too high a speed on the rotary polisher generates more friction heat than is optimal for normal clear coat.\u003c\/p\u003e\n\n\u003cp\u003ePolish dosage on the FoamPad medium: The 5-dot pattern (center + four edge dots) is the standard method for even distribution. Important: Do not apply too much polish — an oversaturated pad smears instead of cutting. The rule of thumb: It is better to start with little and add more if necessary than to start with too much polish and have to wipe the panel multiple times. A well-conditioned FoamPad medium shows an even abrasion film on the working surface after polishing — no excess, no dry area.\u003c\/p\u003e\n\n\u003cp\u003ePad care after use: Clean the FoamPad medium after each vehicle with a pad spinner or a pad washer, not just at the end of the entire workday. Dried polish in the open cell structure changes the rebound properties and reduces the reservoir effect. Daily soaking in lukewarm water with a mild cleaning agent, gentle squeezing, and flat drying maintains the pad's properties over many uses. With proper care, medium-hard foam pads last 80–120 vehicles before replacement is necessary.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for the FoamPad medium — Vehicle Types, Paint Condition and Polishing Scenarios\u003c\/h3\u003e\n\n\u003cp\u003eThe FoamPad medium is the right pad for: vehicles from the last 5–10 years with normal signs of use (holograms from washing, dust streaks), slightly weathered paints on vehicles that have not been polished for 3–5 years, new car detailing with minor transport damage, and one-step detailing on vehicles where time efficiency is important (dealership entry-level detailing, mobile detailing for customers).\u003c\/p\u003e\n\n\u003cp\u003eThe FoamPad medium is less suitable for: vehicles with deep sanding marks from coarse sandpaper (P800 or finer), heavily oxidized paints with a dull, chalky white surface, and vehicles where clear cutting marks from a coarse machine sanding process need to be removed. In these cases, the FoamPad hard or the \u003ca href=\"\/en\/products\/sonax-profiline-hybridwollpad-wollpad\"\u003eSONAX PROFILINE HybridWollPad\u003c\/a\u003e is necessary for the first cutting pass — the medium-hard pad then takes over as a second step to eliminate the residue marks from the heavy cutting pass.\u003c\/p\u003e\n\n\u003cp\u003eA particularly valuable niche for the FoamPad medium: headlight restoration. Yellowed or tarnished polycarbonate headlight lenses can be brightened in a few passes with the FoamPad medium and a suitable headlight polish. The medium-hard pad effectively abrades the tarnished polycarbonate without being too aggressive and cutting deep scratches into the clear coat-like lens material. For headlight restoration, the small Ø75 mm pad (rotary format) or a separate mini-pad is practical for easily reaching the flat headlight geometry.\u003c\/p\u003e\n\n\u003cp\u003eIn professional operation, the FoamPad medium is recommended as standard equipment in multiple quantities: At least 3–5 pads per size for a full workday with vehicle changes. The strategy of \"one pad per vehicle with daily cleaning\" is more sensible for medium-hard pads than for hard pads, as the medium pad fully retains its properties with proper daily cleaning.\u003c\/p\u003e\n\n\u003ch3\u003eFoamPad medium in Comparison — Classification in the PROFILINE Polishing Pad System\u003c\/h3\u003e\n\n\u003cp\u003eIn the PROFILINE polishing pad portfolio, the FoamPad medium occupies the central position: The \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-hart-polierpad\"\u003eSONAX PROFILINE FoamPad hard\u003c\/a\u003e (and the HybridWollPad) stand for maximum cutting performance when high material removal is needed; the FoamPad medium for the broad middle ground of all preparation scenarios; the FoamPad soft for finish polishes on already well-worked paint with no significant residual material removal needs.\u003c\/p\u003e\n\n\u003cp\u003eA direct comparison with the FoamPad hard clarifies the practical differences: The hard pad generates approximately 30–40% more material removal than the medium-hard pad at the same pressure and machine speed — a difference that becomes clearly visible when polishing under strip lighting. This increased cut is the decisive difference for heavily damaged paints; for normal signs of use, it merely means more residue marks in the paint, which require an additional finishing pass. The medium-hard pad is the more efficient choice in these cases: One pass is often sufficient to both eliminate defects and achieve a good finish result.\u003c\/p\u003e\n\n\u003cp\u003eThe difference between the FoamPad medium and the FoamPad soft lies primarily in the application strategy: The soft pad is exclusively suitable for the last finishing phase after a cutting pass or for sensitive paints with very low cutting requirements — without a preceding cutting pass, a soft pad will not completely remove holograms. The medium-hard pad, on the other hand, can be used as both a cutting and finishing pad in most cases, depending on the polish chosen.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the SONAX PROFILINE FoamPad medium — Sizes, Planning, and Professional Portfolio\u003c\/h3\u003e\n\n\u003cp\u003eFor most detailing businesses, the FoamPad medium is the pad with the highest consumption in the range — because it is the first choice for most vehicles and tasks. The Ø150 mm format for DA orbital machines is the standard format used in modern detailing businesses that primarily work with orbital polishers. The Ø75 mm format is for businesses with rotary polishers and for special detail tasks such as headlight restoration and tight areas.\u003c\/p\u003e\n\n\u003cp\u003eFor inventory planning: For a workday with 3–5 vehicles, at least 6–10 FoamPads medium should be kept in sufficient quantity to always have a fresh or cleaned pad available. Rotating several pads simultaneously — one pad polishing, another cleaning itself in the pad spinner — allows for smoother work without waiting times throughout the entire vehicle list. For businesses that use the medium-hard pad daily, a stock of 10–15 pads of each size is recommended — this also covers the needs for several weeks without reordering, even with the wear and tear of individual pads.\u003c\/p\u003e\n\n\u003cp\u003eThe FoamPad medium in the PROFILINE system is always conceived as part of a complete polishing pad portfolio: In combination with the FoamPad hard for heavy heavy-cut tasks and the FoamPad soft for the final high-gloss finish, a complete, clearly graduated three-stage polishing system is created, which provides the right answer for all paint conditions and tasks — from heavily damaged used vehicles to new vehicles with minimal signs of use. As a verified SONAX specialist dealer, Detailing1 permanently carries the FoamPad medium in both sizes in its range and ensures that it is also available for reorders during ongoing operations.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"Ø75 mm","offer_id":57345169850703,"sku":"D1-SNX-4985000","price":22.1,"currency_code":"GBP","in_stock":true},{"title":"Ø150 mm","offer_id":57345169883471,"sku":"D1-SNX-4985410","price":8.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-schaumpad-medium_150-mm.png?v=1774736669","url":"https:\/\/detailing1.co.uk\/en\/products\/sonax-profiline-schaumpad-medium-polierpad","provider":"Detailing1","version":"1.0","type":"link"}