{"product_id":"sonax-profiline-exzenterpad-medium-polierpad","title":"PROFILINE EccentricPad Medium Polishing Pad","description":"\u003ch2\u003eMedium Cut, Maximum Control — The SONAX PROFILINE EccentricPad medium in practical use\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat differentiates a medium-cut polishing pad from a soft or hard one? A medium-cut pad — like the EccentricPad medium — corrects light to medium paint defects with DA orbital polishers without over-abrading, and provides good heat dissipation.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eAnyone who has ever polished with the wrong pad knows the result: either too much material removed and the paint overheated, or too little cut and the scratches remain visible. The \u003cstrong\u003eSONAX PROFILINE EccentricPad medium\u003c\/strong\u003e is designed for exactly the range where most corrections occur — light swirls, fine scratches, moderate oxidation, and holograms that can no longer be removed with finish pads but don't require an aggressive abrasive pad. The medium-cut foam profile gives you the leeway to correct efficiently without losing control over material removal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-cut foam profile for precise paint corrections.\u003c\/strong\u003e The open-pore foam structure of the EccentricPad medium, combined with a suitable polish, creates enough cutting power to remove swirls, holograms, and fine scratches. At the same time, material removal remains controllable — you can correct precisely without overstressing the paint surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficient heat dissipation through open-cell foam.\u003c\/strong\u003e When polishing with DA orbital polishers, friction heat is generated, which can accumulate in closed-pore pads and lead to heat spots or paint damage. The open-cell foam structure of the EccentricPad medium dissipates heat evenly, protecting sensitive clear coat layers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal size selection for different work areas.\u003c\/strong\u003e With Ø125 mm for precise work in tight spaces and Ø150 mm for large panels, the EccentricPad medium offers the flexibility required in professional everyday use. Both sizes fit standard backing plates with Velcro fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Before the first use, apply 3–4 pea-sized drops of polish to the pad and spread it on a panel at a slow speed before beginning the correction — this is known as \"priming\" the pad. A fresh PROFILINE EccentricPad medium absorbs more polish during the first pass; only on the second pass does the pad show its full cutting performance. After each panel, blow out the pad with a foam pad brush or pad cleaner to remove polish residue — this significantly extends pad life.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eOpen-cell foam and medium cut — how the EccentricPad medium works\u003c\/h3\u003e\n\n\u003cp\u003eThe choice of the right polishing pad significantly determines how much time and how many passes a paint correction requires. A pad that is too soft does not generate enough pressure to remove scratches from the clear coat; a pad that is too hard leaves a fine hologram pattern after correction, which must be removed in another pass with a finish pad. Understanding pad mechanics saves considerable time and abrasive consumption in daily operations.\u003c\/p\u003e\n\n\u003cp\u003eA polishing pad blank and a pad are not the same thing. What at first glance looks like a simple piece of foam is the result of a targeted material decision: pore size, foam hardness, and cell structure jointly determine how much abrasive the pad absorbs, how it releases it, and how quickly it heats up. The \u003cstrong\u003eSONAX PROFILINE EccentricPad medium\u003c\/strong\u003e uses an open-cell polyurethane foam with medium hardness. The open cell structure causes polish to be evenly distributed within the pad and released in a controlled manner to the paint surface — a continuous supply that prevents drying out and stabilizes the abrasive effect.\u003c\/p\u003e\n\n\u003cp\u003eA pad's cutting power results from the interaction of foam hardness, surface texture, and pore structure. Soft pads compress significantly, have more material contact with the paint surface, but less pressure per surface point — ideal for finishing. Hard pads compress little, generate high local pressure, and thus more material removal. The medium pad lies in between: it compresses controllably, has a stable pressure build-up, and at the same time allows for even polish distribution. In practice, this means you can remove swirls and holograms with the EccentricPad medium in one or two passes, without necessarily needing an additional finishing pass afterwards — provided you choose the right polish.\u003c\/p\u003e\n\n\u003cp\u003eThe choice of size between Ø125 and Ø150 mm depends on the work area and the machine used. Ø125 mm is the standard size for DA orbital polishers with a 5 mm throw and is suitable for all body areas. Ø150 mm allows for higher throughput on large, flat panels such as the hood or roof, but requires a machine with corresponding power reserves. Those who use both sizes can specifically switch between detailed work and surface polishing.\u003c\/p\u003e\n\n\u003cp\u003eThe Velcro fastener on the back of the pad is designed for standard backing plates. The Velcro quality of the PROFILINE line holds reliably even during several hours of continuous use — the pad sits firmly, does not slip, and does not detach itself even on a moist-greasy surface. This is one of the most common problems in daily operation with cheaper pads.\u003c\/p\u003e\n\n\u003ch3\u003eCorrectly using a DA polishing pad — step-by-step with the EccentricPad medium\u003c\/h3\u003e\n\n\u003cp\u003eBefore you begin the first polishing pass, it's worth a quick paint check. Heavily soiled paint should be decontaminated before polishing — an iron remover binds industrial fallout, and a clay bar product removes bonded contamination that would otherwise act as abrasive particles during polishing. The EccentricPad medium works more efficiently on clean, decontaminated paint: the abrasive particles of the polish directly attack the clear coat instead of expending energy on loosening surface contaminants.\u003c\/p\u003e\n\n\u003cp\u003eDA orbital machines work with an overlapping movement of rotation and orbital motion — this makes them more forgiving and accessible for beginners compared to rotary machines, but still requires the right technique. The speed selection significantly influences how much cutting power the EccentricPad medium actually develops. For medium correction work, a speed between 4,000 and 5,500 revolutions per minute is recommended. Lower speeds reduce heat generation but also provide less cut; higher speeds accelerate correction but increase the risk of heat spots with multiple overlaps.\u003c\/p\u003e\n\n\u003cp\u003eAlways choose a test panel first — ideally an inconspicuous area on the vehicle, such as the lower door area or the roof in a less exposed corner. Apply the polish directly to the pad, not to the paint. Start at a low speed and spread the polish over the panel without increasing pressure, before increasing the speed for the actual correction pass. Overlapping passes of 30–40% ensure an even, streak-free result. Two to three passes are usually sufficient for medium-grade swirls; deeper scratches require additional passes or switching to the EccentricPad hard.\u003c\/p\u003e\n\n\u003cp\u003eAfter polishing, the polish residue pattern becomes the indicator: if the abrasive film is evenly broken down and almost completely worked, the pad has performed optimally. Clumpy or uneven residue indicates too much polish or too low a speed. The PROFILINE EccentricPad medium can be cleaned with warm water and pad cleaner after use and is reusable after drying. Professionals recommend sorting pads separately by polish type and not switching between abrasive and finishing products.\u003c\/p\u003e\n\n\u003ch3\u003eCorrecting paint defects — when the EccentricPad medium is the right choice\u003c\/h3\u003e\n\n\u003cp\u003ePaint care is not just a matter of appearance — it's also about preserving value. A vehicle with corrected, sealed paint achieves measurably better results when returned or sold than a vehicle with untreated signs of use. Polishing with a DA orbital polisher and the EccentricPad medium is an investment that pays off for frequent drivers and vehicle fleets when the next valuation comes around.\u003c\/p\u003e\n\n\u003cp\u003eThe EccentricPad medium is the all-rounder in the polishing pad portfolio — it covers the area most frequently required in everyday detailing. Vehicles with normal wear and tear that are regularly washed accumulate a fine swirl pattern over months, originating from automatic car washes, microfiber towels, or wash mitts with dirt particles. Precisely this surface depth — usually 1 to 3 micrometers — is the target zone of the EccentricPad medium. It removes enough to go below the scratch depth without interfering with deeper paint layers.\u003c\/p\u003e\n\n\u003cp\u003eMore severely damaged paint surfaces with deep scratches, oxidation damage, or etched water spots that cannot be bridged by the fingernail test require the EccentricPad hard or a rotary pass. An honest assessment before polishing saves time: if a scratch is palpable with a fingernail, it is in the primer or clear coat at the limit — the EccentricPad medium will not be able to completely remove it. As a rule of thumb: what the nail glides over without catching, the medium pad can correct.\u003c\/p\u003e\n\n\u003cp\u003eTemperatures also play a role: on cold paint surfaces below 10 °C, foam reacts stiffer — the pad compresses less, contact pressure increases. On hot summer days outdoors, however, the pad becomes softer and more aggressive. These variables should be considered during the first test panel to estimate the result before entire panels are polished.\u003cbr\u003e\nEven with freshly painted vehicles, new cars with fine transport scratches, or after chemical pretreatment with a clay bar product, the EccentricPad medium is the first choice for paint correction. It gives the paint enough cutting power for a visible improvement without the risk of over-abrading fresh paint molecules. Following correction with the EccentricPad medium, a final finishing pass with the \u003ca href=\"\/en\/products\/sonax-profiline-exzenterpad-weich-125-polierpad\"\u003eSONAX PROFILINE EccentricPad soft\u003c\/a\u003e is recommended to remove the last micro-scratches from the polishing process and leave the paint mirror-smooth.\u003c\/p\u003e\n\n\u003ch3\u003eEccentricPad medium vs. hard vs. FoamPad — which pad when?\u003c\/h3\u003e\n\n\u003cp\u003eIn practice, pad selection is not a matter of personal preference but of paint condition and desired results. The \u003cstrong\u003eSONAX PROFILINE EccentricPad medium\u003c\/strong\u003e occupies the middle ground: more cut than a finish pad, more gentle than a cutting pad. The EccentricPad hard is suitable for pronounced scratches, oxidation, and heavy swirls — its denser foam core, combined with a highly abrasive polish, generates enough pressure for deep material removal. The drawback: the finishing effort afterward is higher because the hard pad leaves finer holograms.\u003c\/p\u003e\n\n\u003cp\u003eCompared to the \u003ca href=\"\/en\/products\/sonax-profiline-exzenterpad-hart-polierpad\"\u003eSONAX PROFILINE EccentricPad hard\u003c\/a\u003e, the medium pad can combine the first correction pass directly with finishing in a two-phase workflow — if the polish matches the pad's cutting ability. This saves time and is sufficient for vehicles with normal use. Those working with a one-step polish like the \u003ca href=\"\/en\/products\/sonax-profiline-np-03-06-hochglanz-politur-finish\"\u003eSONAX PROFILINE NP \"03-06\"\u003c\/a\u003e will find the EccentricPad medium to be the ideal carrier foam: the NP \"03-06\" develops its cutting and finishing properties best on medium-cut pads and leaves a high gloss finish after one pass.\u003c\/p\u003e\n\n\u003cp\u003eCompared to the FoamPads from the PROFILINE line, the EccentricPad differs in its specific design for DA machines. FoamPads can, in principle, also be used on orbital polishers, but their material selection is designed for rotary applications. The EccentricPad medium is optimally matched for use with a DA orbital polisher — the foam's rebound characteristic corresponds to the machine's movement frequency.\u003c\/p\u003e\n\n\u003ch3\u003eTarget group, combinations and purchase recommendation for the EccentricPad medium\u003c\/h3\u003e\n\n\u003cp\u003eThe medium polishing pad from the PROFILINE line is designed for professional detailers who regularly work with DA orbital polishers and need a reliable correction pad for the majority of vehicles they encounter daily. For detailing beginners with a DA machine, it is also the right entry-level pad because it offers more error tolerance than a hard cutting pad. The risk of over-abrading the paint with incorrect technique is significantly lower with the medium pad than with an aggressive cutting pad.\u003c\/p\u003e\n\n\u003cp\u003eThose who regularly work on different types of vehicles benefit from a structured pad system. Dark vehicles and clear coats with low film thickness require more finesse — here, the EccentricPad medium is often the safe choice because it keeps material removal controllable. For light colors and paints with good film thickness, a hard pad can also be useful in the first pass to remove deep scratches more quickly. A careful paint thickness measurement with a paint thickness gauge before polishing is standard for professional demands.\u003c\/p\u003e\n\n\u003cp\u003eFor professional use, the bulk option with 15 pieces (Ø125 mm) or 10 pieces (Ø150 mm) is recommended. Detailers who polish several vehicles per day change the pad after two to three vehicles at the latest — a fresh pad consistently shows better results than a saturated one. With the 15-piece set, you have enough pads for a workday without having to wash them in between. This not only saves time but also polish, because a fresh pad absorbs the abrasive more efficiently and releases it more evenly.\u003c\/p\u003e\n\n\u003cp\u003eFor individual users with occasional polishing needs, the single pack is the right choice: well-maintained and cleaned after each use, a PROFILINE EccentricPad medium lasts for many applications. The combination of an EccentricPad medium for the correction pass and an EccentricPad soft for the final finishing pass is the standard two-phase workflow that Detailing1 recommends for normal used vehicles. As a verified SONAX specialist dealer, Detailing1 permanently carries the PROFILINE EccentricPad medium in all sizes and pack quantities in its assortment. For businesses with high polishing volumes, it is also worth looking at combined pad sets: a supply of medium and soft pads covers the entire two-phase workflow without having to reorder during ongoing jobs. Upon request, Detailing1 provides recommendations for pad rotation strategies for various vehicle classes and polish types.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"Ø125 mm – 1 piece","offer_id":57345292337487,"sku":"D1-SNX-4986000","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"Ø125 mm – 15 pieces","offer_id":57345292370255,"sku":"D1-SNX-4987000","price":64.61,"currency_code":"GBP","in_stock":true},{"title":"Ø150 mm – 1 piece","offer_id":57345292403023,"sku":"D1-SNX-4986410","price":10.75,"currency_code":"GBP","in_stock":true},{"title":"Ø150 mm – 10 pieces","offer_id":57345292435791,"sku":"D1-SNX-4987410","price":49.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-exzenterpad-medium_125-mm--1-stueck.png?v=1774736564","url":"https:\/\/detailing1.co.uk\/en\/products\/sonax-profiline-exzenterpad-medium-polierpad","provider":"Detailing1","version":"1.0","type":"link"}