{"title":"Universal cleaner","description":"","products":[{"product_id":"koch-chemie-green-star-gs-universalreiniger","title":"Green Star \"Gs\" Universal Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eWorkshop Chemistry for Engine Bay, Floor, and Lift with Koch-Chemie Green Star\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Green Star? A highly alkaline APC concentrate cleaner with pH 13 that dissolves oil, grease, and lubricants on workshop floors, in the engine bay, and on the lift in one go. Not intended for pH-neutral coatings, synthetic leather dashboards, or anodized aluminum parts without prior testing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003eThe \u003cstrong\u003eKoch-Chemie Green Star Universal Cleaner\u003c\/strong\u003e is a highly alkaline APC concentrate that works through a mix of surfactants, alkali builders, and corrosion inhibitors. The pH value between 12.5 and 13 saponifies organic contaminants such as oil, grease, and wax into soap compounds.\u003c\/p\u003e\n\n\u003cp\u003eThe surfactant shell then keeps the dissolved dirt in suspension, preventing it from drying back onto the surface during rinsing. This makes Green Star the standard APC for many workshops and detailers who are looking for a single cleaner for the engine bay, lift, workshop floor, and exterior plastics — not because it excels everywhere, but because it provides the right balance of cleaning power and material compatibility in this segment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_hero.png?v=1775995591\" alt=\"Koch-Chemie Green Star Gs bottle and canister on concrete wall in front of white Ferrari 296 GTB\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne chemistry, four dilution levels.\u003c\/strong\u003e Concentration determines the application: 1:5 for workshop floors and heavily oiled engine bays, 1:10 as a pre-cleaner for rims and insect remover, 1:20 for exterior plastics and rubber care, 1:50 for regular maintenance cleaning in customer reception areas. An 11-kilo canister replaces three separate cleaners for about six months in a two-lift operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhosphate and solvent-free with corrosion inhibitor.\u003c\/strong\u003e The formula is free of NTA, phosphates, and solvents and contains an aluminum corrosion inhibitor. This is why you can safely use Green Star on painted aluminum, steel, and most plastics — but only if you adhere to the dilution. Used neat, the corrosion protection becomes a softening zone, especially on anodized aluminum.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOil-carrying capacity down to the pore structure.\u003c\/strong\u003e On a one-year-old workshop floor with ingrained lubricating and gear oil, 1:5 diluted Green Star completely dissolves the upper layer of dirt after three minutes of dwell time — and brings some of the oil stored in the concrete pores back to the surface. A second pass removes residual dirt that remained in the pore bed after the first pass. This is not mechanically feasible with pH-neutral interior cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Never spray on warm or sun-heated surfaces — at engine blocks above approx. 40 °C, the alkaline solution dries and causes water spots and limescale residues on painted covers. Working sequence in the engine compartment: allow vehicle to cool, cover intake and electronics, work from bottom to top with 1:10, allow to act for a maximum of three minutes, rinse generously with a soft water jet from the \u003ca href=\"\/en\/collections\/universalreiniger\"\u003euniversal cleaner\u003c\/a\u003e group. For recurring jobs, a foam sprayer is worthwhile — it distributes the 1:10 solution more evenly than any hand pump and extends the adhesion time on vertical surfaces by 40 to 60 seconds.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e1 to 5. 1 to 20. One canister, four jobs.\u003c\/h3\u003e\n\u003cp\u003eWith Koch-Chemie Green Star Universal Cleaner, it's not the bottle that determines the cleaning power, but the mixing ratio. If you don't differentiate, you either clean too weakly or damage the material.\u003c\/p\u003e\n\n\u003cp\u003eFor workshop floors, dilute 1:5 in warm water, apply with a scrubber or single-disc machine, let it dwell for three minutes, and then pick it up with a wet vacuum. For the lift and engine bay, 1:10 is the safe standard: This concentration reliably dissolves oil without attacking rubber steering boots or wiring harness coverings. For exterior plastics, trim, and heavily soiled wheel arches, 1:20 is sufficient. The 1:50 dilution is intended for recurring maintenance cleaning in customer reception areas or on tiled floors and is no longer really \"APC,\" but rather a mild alkaline cleaner with residual grease-dissolving power.\u003c\/p\u003e\n\n\u003cp\u003eWorkshops almost always make the same mistake with Green Star: too strong a dilution, because \"pure cleans better pure\" is stuck in their heads. In practice, 1:5 on an engine block offers no measurable advantage over 1:10 — except for higher chemical consumption and the risk of overloading corrosion inhibitors on aluminum. The right lever is the dwell time: three minutes instead of two. Two passes instead of one. Never increase the concentration if the first attempt is not enough.\u003c\/p\u003e\n\n\u003cp\u003eFor practical dosing, two workflows work reliably. Variant one: canister directly with a dosing station at the water connection, mixing ratio set via the Venturi nozzle, application by foam sprayer or pressure sprayer. Variant two for smaller businesses: Two labeled spray bottles of 500 milliliters, one with the 1:10 solution for the engine bay and wheel arch, one with 1:20 for exterior plastics. Mix both bottles fresh daily — alkaline working solutions lose cleaning power within 24 hours because CO₂ from the air slowly lowers the pH.\u003c\/p\u003e\n\n\u003cp\u003eAn 11-kilo canister covers approximately 110 liters of working solution with a properly mixed 1:10 solution — that's about 40 engine bay cleanings or 15 workshop floor passes over 100 square meters. For businesses with two lifts and regular detailing, the 22-kilo or 225-kilo drum goods become cost-effective from three cleanings per week — purely due to the per-kilo price difference.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_closeup.png?v=1775995596\" alt=\"Koch-Chemie Green Star Gs label close-up with visible pH 12.5\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAlkaline. But not for everything.\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Green Star Universal Cleaner has workshop DNA — not the right chemistry for delicate interior or coating surfaces.\u003c\/p\u003e\n\n\u003cp\u003eIt is strong wherever organic dirt dominates: engine oil, gear oil, grease mist in the engine bay, soot layers on workshop floors, brake dust-grease mixtures in wheel arches, road grime on commercial vehicle frames. Insects and bird droppings can also be soaked with the 1:10 dilution before the actual car wash. The alkaline pH saponifies the proteins and turns a hard crust into a removable layer — precisely where pH-neutral products would require mechanical action.\u003c\/p\u003e\n\n\u003cp\u003eGreen Star reaches its limits precisely where its pH becomes a problem. On car paints with ceramic coatings, each use gradually removes the outermost adhesive layer of the coating — for coating-sealed cars, a pH-neutral shampoo or Koch-Chemie \u003ca href=\"\/en\/products\/koch-chemie-mehrzweckreiniger-mzr-universalreiniger\"\u003eMultipurpose Cleaner \"Mzr\"\u003c\/a\u003e is the choice.\u003c\/p\u003e\n\n\u003cp\u003eAnodized aluminum, matte aluminum, and polished metal surfaces should never be treated neat and always tested first in an inconspicuous area. The corrosion inhibitor reliably protects painted aluminum, but reaches its limits with anodized surfaces. Caution is also advised with non-anodized magnesium rims and race parts — here, the alkaline component attacks the surface as soon as the dwell time exceeds two minutes.\u003c\/p\u003e\n\n\u003cp\u003eIn the vehicle interior, Green Star is simply too strong: synthetic leather, Alcantara, and coated dashboards do not tolerate alkaline concentrates permanently, not even at 1:50. If you want to work with one cleaner for both workshop and interior, you should use a different chemical for that.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_ergebnis.png?v=1775995602\" alt=\"Freshly cleaned Ferrari engine bay after Koch-Chemie Green Star cleaning\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eGreen Star, Gs9 or Mzr. Your Decision Tree.\u003c\/h3\u003e\n\u003cp\u003eKoch-Chemie has three universal cleaners with overlapping areas of application — the choice depends not on the price, but on the object.\u003c\/p\u003e\n\n\u003cp\u003eThe classic Green Star is the workshop variant: highly alkaline, high oil-carrying capacity, designed for tough exterior and underbody work. The \u003ca href=\"\/en\/products\/koch-chemie-green-star-96-gs9-universalreiniger\"\u003eGreen Star 96 \"Gs9\"\u003c\/a\u003e is the milder successor with an optimized surfactant base and lower environmental impact — it doesn't replace the classic Gs, but complements it for detailers who work more frequently on private customer vehicles with coatings and less on commercial vehicle frames. The Multipurpose Cleaner \"Mzr\" is based on a completely different chemical principle: weakly alkaline to pH-neutral, for interiors, dashboards, carpets, and upholstery. Gs cleans the engine bay, Mzr cleans the seats afterwards.\u003c\/p\u003e\n\n\u003cp\u003ePractical rule for the purchasing decision: If the focus is on lifts, engine bays, workshop floors, and commercial vehicle detailing, you should choose the classic Green Star in 11 or 22 kilos. If you primarily detail private customer vehicles with ceramic protection and need the APC for wheel arches, insect removal, and exterior plastics, the Gs9 is the more suitable purchase. If you are looking for a cleaner for interiors, carpets, and upholstery, neither Gs nor Gs9 is the right answer — in that case, you should choose the Mzr.\u003c\/p\u003e\n\n\u003cp\u003eFor the typical one-man detailer with a mixed customer base, the combination of 11-kilo Green Star and 1-liter Mzr handles most practical work: Gs for the entire exterior, engine bay, and floor cleaning, Mzr for the interior. Those who have three separate APCs on the shelf — workshop cleaner, wheel cleaner, interior cleaner — can halve their chemical cabinet with this two-product solution and still work cleaner.\u003c\/p\u003e\n\n\u003cp\u003eThe correct container size depends on the monthly throughput. The 1000-milliliter spray head is intended for home users and initial trials, not for commercial operations. From one vehicle per week with thorough exterior cleaning, the 5-liter canister becomes cost-effective; from three vehicles, the 11-kilo container. 22 and 225 kilos belong in workshops with dosing stations and regular commercial vehicle contracts — for smaller businesses, they represent an unnecessary commitment to a single chemical and are less convenient to handle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_detail.png?v=1775995607\" alt=\"Green Star cleaning solution on black plastic wheel arch of the Ferrari\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":48494630109519,"sku":"D1-KCX-68037","price":6.08,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":48725287960911,"sku":"D1-KCX-68037_2","price":11.92,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":48725287993679,"sku":"D1-KCX-68037_3","price":17.69,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":48762352468303,"sku":"D1-KCX-291005","price":27.02,"currency_code":"EUR","in_stock":true},{"title":"11kg","offer_id":48494630142287,"sku":"D1-KCX-69069","price":54.71,"currency_code":"EUR","in_stock":true},{"title":"22kg","offer_id":49094546522447,"sku":"D1-KCX-291022","price":105.59,"currency_code":"EUR","in_stock":true},{"title":"225kg","offer_id":49094546555215,"sku":"D1-KCX-291225","price":1036.79,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-green-star-universalreiniger.jpg?v=1710769279"},{"product_id":"koch-chemie-green-star-96-gs9-universalreiniger","title":"Green Star 96 \"Gs9\" universal cleaner","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Green Star 96 \"GS9\" — Universal Cleaner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Green Star 96\u003c\/strong\u003e is a highly concentrated, \u003cstrong\u003ephosphate- and solvent-free, alkaline universal cleaner\u003c\/strong\u003e that stands out for its exceptional dirt and oil carrying capacity. This cleaner is versatile and ideal for the \u003cstrong\u003einterior and exterior cleaning of cars, trucks, workshop floors, industrial areas\u003c\/strong\u003e, as well as for \u003cstrong\u003eengine washing\u003c\/strong\u003e. Thanks to special \u003cstrong\u003ecorrosion inhibitors\u003c\/strong\u003e, it is also perfectly suited for sensitive materials such as \u003cstrong\u003eanodized aluminum\u003c\/strong\u003e. The environmentally friendly formula also allows for use in \u003cstrong\u003ebiological wastewater treatment plants\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dirt and oil carrying capacity:\u003c\/strong\u003e Efficiently removes stubborn dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial-friendly:\u003c\/strong\u003e Corrosion inhibitors protect sensitive surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Ideal for vehicle cleaning, workshop floors, and industrial cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVehicle and Engine Cleaning\u003c\/h3\u003e\n\u003cp\u003eThe Green Star 96 is excellent for cleaning vehicles and engines. Due to its high dirt-dissolving power, it can effectively remove \u003cstrong\u003egrease, oil, and stubborn dirt\u003c\/strong\u003e. For application, simply dilute in a ratio of \u003cstrong\u003e1:4 to 1:20\u003c\/strong\u003e, apply, let it work for a short time, and then rinse thoroughly with a \u003cstrong\u003ehigh-pressure cleaner\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eCleaning of Workshop and Industrial Floors\u003c\/h3\u003e\n\u003cp\u003eIn workshops and industrial areas, Green Star 96 is indispensable. Its special formula allows for the removal of oil and dirt residues from \u003cstrong\u003efloors and machines\u003c\/strong\u003e. For this application, the cleaner is diluted in a ratio of \u003cstrong\u003e1:30 to 1:90\u003c\/strong\u003e and applied to the affected areas. Thanks to \u003cstrong\u003eVDA conformity (Class A)\u003c\/strong\u003e, safe application is guaranteed.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility and Application\u003c\/h3\u003e\n\u003cp\u003eThanks to the \u003cstrong\u003ecorrosion inhibitors\u003c\/strong\u003e, Green Star 96 is also suitable for sensitive surfaces such as anodized aluminum. It can also be combined with the \u003cstrong\u003efoam inhibitor KocEntschäumer\u003c\/strong\u003e for use in spray extraction units and carpet cleaning machines. The cleaner separates quickly according to \u003cstrong\u003eÖNORM 5105\u003c\/strong\u003e and is therefore environmentally friendly.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"11kg","offer_id":48762361774415,"sku":"D1-KCX-308011","price":37.43,"currency_code":"EUR","in_stock":true},{"title":"22kg","offer_id":49723807334735,"sku":"D1-KCX-308022","price":71.99,"currency_code":"EUR","in_stock":true},{"title":"225kg","offer_id":49723807367503,"sku":"D1-KCX-308225","price":682.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-green-star-96-gs9-universalreiniger_11kg.png?v=1714925912"},{"product_id":"koch-chemie-mehrzweckreiniger-mzr-universalreiniger","title":"Multi-purpose cleaner \"Mzr\" universal cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eDeep Cleaning Oil, Nicotine, and Grease with Koch-Chemie Multi-Purpose Cleaner Mzr\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Multi-Purpose Cleaner Mzr? An alkaline intensive cleaner with pH 12.5 that chemically dissolves oils, greases, nicotine, soot, and discoloration on textiles, plastics, and industrial surfaces – dilutable as a concentrate from 1:5 to 1:50. Not suitable for soft-touch surfaces, leather, and painted surfaces.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Mzr\u003c\/strong\u003e is an alkaline cleaner concentrate from Koch-Chemie that chemically dissolves stubborn organic dirt from pores and fibers. The high pH value of 12.5 in the concentrate saponifies fats and oils through alkaline hydrolysis – a process that pH-neutral cleaners cannot chemically achieve. Diluted to 1:10, the pH value is around 11, which is sufficient for most vehicle interior surfaces. Koch-Chemie has given the cleaner an official Daimler approval, making it a standard product in detailing shops and workshops.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_hero.png?v=1776196784\" alt=\"Koch-Chemie Mzr 1L bottle next to open door of a black Mercedes-AMG GT in the warehouse workshop\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDilutable from 1:5 to 1:50 – a concentrate for every type of dirt.\u003c\/strong\u003e For heavy soiling such as engine oil or nicotine residue, use a 1:5 dilution. For regular interior cleaning, 1:20 to 1:50 is sufficient. 1 liter of concentrate yields 21 liters of working solution when diluted 1:20 – at a purchase price of €7.67, that's €0.37 per liter of ready-to-use cleaning solution.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDissolves what pH-neutral cleaners leave behind.\u003c\/strong\u003e Nicotine, greasy fingerprints on headliners, ingrained discoloration on light upholstery – these are the cases where Mzr truly shines. The alkaline formulation saponifies fatty acids and emulsifies oil residues, rather than just displacing them on the surface. Where a neutral \u003ca href=\"\/en\/products\/koch-chemie-allround-surface-cleaner-asc-allzweckreiniger\"\u003eall-purpose cleaner\u003c\/a\u003e requires two passes, Mzr only needs one.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler approval for workshop use.\u003c\/strong\u003e The official approval confirms material compatibility on factory-installed textiles and plastics from Mercedes-Benz. Detailing shops, fleet managers, and independent workshops therefore use this cleaner as a standard interior cleaner – one concentrate for the entire vehicle fleet instead of multiple specialized products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Never spray Mzr undiluted onto surfaces – pH 12.5 in the concentrate attacks sensitive plastics and pigments. Always dilute it in the spray bottle first and start with 1:10. If that's sufficient, reduce the dosage to 1:20 next time. The most common mistake in practice: working with too strong a concentration and then getting white spots on dark plastics because the alkalinity attacks the surface structure. Two passes with 1:10 will produce a better and more even result than one pass with 1:5.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e1:10 on the headliner. 1:50 on the door handle.\u003c\/h3\u003e\n\u003cp\u003eKoch-Chemie Mzr works as a concentrate that you dilute individually for each application. This fundamentally distinguishes it from ready-to-use interior cleaners like the \u003ca href=\"\/en\/products\/koch-chemie-multi-interior-cleaner-innenraumreiniger-750ml\"\u003eKoch-Chemie MultiInteriorCleaner\u003c\/a\u003e, which come with a fixed, unchangeable concentration.\u003c\/p\u003e\n\n\u003cp\u003eFor headliners with nicotine residue or discolored fabric upholstery, use a 1:5 to 1:10 dilution. Spray the solution evenly, let it work for 1-3 minutes, and then work it in with a soft detailing brush in circular motions. Mzr chemically dissolves the dirt, and the brush transports it out of the fibers. Afterwards, remove the dissolved dirt with a clean microfiber cloth or a wet vacuum cleaner. For headliners, a wet vacuum cleaner is mandatory – too much standing moisture can loosen the textile adhesive and cause the headliner to detach.\u003c\/p\u003e\n\n\u003cp\u003eFor everyday interior cleaning – dashboard, center console, door panels – a dilution of 1:20 to 1:50 is sufficient. At this concentration, Mzr is gentle enough for most hard plastics. The surface becomes clean without leaving a greasy film.\u003c\/p\u003e\n\n\u003cp\u003eAfterwards, you can directly apply a plastic dressing – Mzr leaves no residue that would prevent adhesion. This makes it ideal for pre-cleaning before care steps. Nevertheless: On steering wheels with soft-touch coating and rubberized grips, even the weakest dilution is risky. In these cases, it is better to use a pH-neutral cleaner.\u003c\/p\u003e\n\n\u003cp\u003eMzr also demonstrates its versatility outside the vehicle: workshop floors with oil stains, dirty industrial machinery, discolored RV paneling. For outdoor use, dilute 1:5 to 1:10 and let it sit for 3-5 minutes. Work it in with a high-pressure cleaner or a brush, then rinse off.\u003c\/p\u003e\n\n\u003cp\u003eA detail that Koch-Chemie doesn't mention on the product page: Mzr leaves a pleasant, subtle scent on cleaned surfaces. Not an artificial air freshener, but significantly less chemical than comparable industrial cleaners. In smoker's cars, this does not cover the nicotine smell – but after cleaning, the interior smells neutral instead of chemical. This may sound like a side effect, but it is relevant in practice if you are preparing vehicles for sale or return.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_anwendung.png?v=1776198150\" alt=\"Headliner cleaning with diluted Koch-Chemie Mzr from iK Multi TR 1 spray bottle in a Mercedes-AMG GT\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003ch3\u003eKoch-Chemie Mzr dissolves nicotine residue. It attacks leather.\u003c\/h3\u003e\n\u003cp\u003eOrganic contamination is the core area of Koch-Chemie Mzr: greasy fingerprints, nicotine film, soot, ink stains, and the typical discoloration on light upholstery after two years of everyday use. Here, the alkaline formulation works reliably and in one pass.\u003c\/p\u003e\n\n\u003cp\u003eThe color change from clean to dirty is immediately visible with Mzr – the microfiber cloth clearly shows what the cleaner has removed from the surface after wiping. Especially impressive on discolored, light fabric upholstery: the first wipe often shows two shades of difference. This is not marketing exaggeration, but the chemical effect of alkaline saponification, which dissolves deep-seated grease contamination that a neutral cleaner cannot reach.\u003c\/p\u003e\n\n\u003cp\u003eKoch-Chemie deliberately positions Mzr as a multi-purpose cleaner for cars, industry, and building cleaning. The container sizes demonstrate this: in addition to the 1-liter bottle, there are 11 kg, 21 kg, and 225 kg containers. This is a workshop cleaner that also works in vehicle interiors. This origin explains its strength: Mzr is formulated for industrial contamination and brings that power to the vehicle interior.\u003c\/p\u003e\n\n\u003cp\u003eWhere Mzr is not the right product: On genuine leather and artificial leather with an open-pore structure, the alkalinity can dry out the surface and leave discoloration. Leather requires a pH-adjusted leather cleaner. On soft-touch plastics and rubberized surfaces such as steering wheels or gear knobs, it leaves dull spots. An alkaline cleaner has no place on painted or foiled surfaces – even diluted to 1:50, the pH value is above 9. If you need a \u003ca href=\"\/en\/collections\/universalreiniger\"\u003euniversal cleaner\u003c\/a\u003e without risk for sensitive materials, Koch-Chemie ASC is the safer choice – pre-mixed, pH-neutral, for all surfaces.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_ergebnis.png?v=1776196797\" alt=\"Headliner before and after cleaning with Koch-Chemie Mzr – nicotine discoloration on the left, rich black Alcantara on the right\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003ch3\u003eOne canister of Koch-Chemie Mzr. 200 liters of working solution.\u003c\/h3\u003e\n\u003cp\u003eKoch-Chemie Mzr pays off through its yield. 1 liter of concentrate, diluted 1:20, yields 21 liters of ready-to-use solution – enough for 15-20 complete interior cleanings. At €7.67 per liter, you're looking at under €0.50 per vehicle. For those who detail regularly, the 11 kg canister is the choice: at €77.75, that's €7.07 per kilogram and around 200 liters of working solution at a 1:20 dilution.\u003c\/p\u003e\n\n\u003cp\u003eMzr is aimed at detailers, workshops, and ambitious hobbyists who want a concentrate instead of pre-mixed spray bottles. If you only occasionally clean the interior and don't want to bother with dilution, use the MultiInteriorCleaner as a ready-to-use solution. If you want to dose flexibly – stronger for a smoker's car interior, weaker for weekly maintenance – Mzr is the more economical choice.\u003c\/p\u003e\n\n\u003cp\u003eFor daily work in the workshop, we recommend the Koch-Chemie dispensing tap on the 11 kg canister: dispense concentrate into the spray bottle, fill with water, done. The 1-liter bottle is suitable for mobile use and the detailing box. Store both containers frost-free between 5 and 30 °C; the concentrate lasts 24 months unopened. Use diluted solution within 4 weeks.\u003c\/p\u003e\n\n\u003cp\u003eA safety note at the end: Mzr is classified as corrosive (H314) and bears the signal word \"Danger\". Always wear protective gloves and safety goggles when using the concentrate. In the usual working dilution of 1:10 to 1:20, the risk is significantly lower, but prolonged skin contact should still be avoided. The safety data sheet can be downloaded from the product page.\u003c\/p\u003e\n\n\u003cp\u003eIn summary: Koch-Chemie Mzr is not an everyday cleaner for a quick wipe. It is a tool for detailing where deep cleaning is required – smoker's cars, used car detailing, workshop floors, industrial machinery. Those who have these use cases and are willing to deal with dilution and protective equipment will get a concentrate that is hard to beat at costs under €0.50 per vehicle.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_lineup.png?v=1776196804\" alt=\"Koch-Chemie Mzr 1 liter bottle and 11 kg canister on paving stones in front of a warehouse with a Mercedes-AMG GT\" width=\"900\" loading=\"lazy\"\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":48762462536015,"sku":"D1-KCX-86001","price":7.67,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 ml","offer_id":49536037454159,"sku":"D1-KCX-86001_2","price":15.03,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49536037486927,"sku":"D1-KCX-86001_3","price":22.32,"currency_code":"EUR","in_stock":true},{"title":"11kg","offer_id":48762460307791,"sku":"D1-KCX-86011","price":77.75,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49536024772943,"sku":"D1-KCX-86021","price":143.03,"currency_code":"EUR","in_stock":true},{"title":"225kg","offer_id":49536024805711,"sku":"D1-KCX-86225","price":1505.27,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-mehrzweckreiniger-mzr-universalreiniger.png?v=1714922290"},{"product_id":"sonax-xtreme-folienreiniger-spezialreiniger-folierungen","title":"XTREME Film Cleaner Special cleaner for film wraps","description":"\u003ch2\u003eGently clean film and effortlessly remove road grime with SONAX XTREME Film Cleaner\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes SONAX XTREME Film Cleaner special? The solvent and acid-free special cleaner removes road grime, insect residue, and bird droppings from PPF, vinyl, films, and matte paints — with a micro-active surfactant formula that cleans powerfully without harming the film.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFoiled vehicles are increasingly common on the road — and they come with special requirements when washing. Normal car shampoo is designed for clear coats, not for the sensitive surface chemistry of PPF, vinyl films, or matte finishes. Washing a foiled vehicle with aggressive cleaners or incorrect chemicals risks matting effects on gloss films, discoloration at edges and seams, or premature detachment of adhesive bonds. The \u003cstrong\u003eSONAX XTREME Film Cleaner\u003c\/strong\u003e has been developed precisely for these vehicles: a powerful special cleaner that effectively loosens road grime, insect residues, bird droppings, and brake dust film — without chemically stressing the film. The solvent and acid-free formula ensures high material compatibility while providing strong cleaning performance, and the 750 ml spray bottle can be used directly on the film during the washing process. For anyone who wants to professionally care for their foiled vehicle without relying on aggressive all-purpose products.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowerful cleaning with maximum film compatibility.\u003c\/strong\u003e The micro-active surfactant combination effectively dissolves typical road grime — brake dust, road dirt, insect residue, bird droppings — without attacking the film coating. By avoiding solvents and acids, the chemical integrity of every type of film is fully preserved, even with frequent use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversally applicable on all film types — gloss, matte, PPF, and vinyl.\u003c\/strong\u003e The cleaner works equally well on high-gloss films, matte films, PPF (Paint Protection Film), vinyl wraps, and factory matte paints. This means there's no need to stock different cleaners for various film types — one product covers the entire spectrum.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect application to the film during washing — without complex pre-treatment.\u003c\/strong\u003e The spray bottle allows targeted direct wetting of dirty areas while the vehicle is still wet. This saves time in the washing process and enables concentrated treatment of problem areas such as front spoilers, rocker panels, and hoods without a separate cleaning step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always spray XTREME Film Cleaner onto the wet film during washing — never onto dry or hot surfaces. The micro-active surfactants require water as a carrier medium to fully unfold their cleaning effect. Work the cleaner in with a very soft wash mitt or a dedicated film washing cloth — sponges with a coarse texture are unsuitable for films. For stubborn insect residues, let the cleaner sit briefly (30–60 seconds) before working it in. Rinse thoroughly after washing and do not let it dry.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMicro-active surfactant technology — how the film cleaner removes dirt without damaging the film\u003c\/h3\u003e\n\u003cp\u003eThe key to the performance of XTREME Film Cleaner lies in the selection of the surfactant combination. Surfactants are the active cleaning molecules in detergents and cleaners — they have a water-loving (hydrophilic) and a fat-loving (hydrophobic) molecular component, which allows them to dissolve dirt and grease from the substrate and suspend it in the water phase. With film cleaners, however, it's not just about removing dirt, but about doing so without damaging the film coating. This is a more challenging task than cleaning clear coat because films are more sensitive to chemical influences: solvents can dissolve film adhesives, acids attack matte surfaces and change their reflectance, and incorrect pH values can soften adhesive seams. The micro-active surfactant combination in XTREME Film Cleaner is tailored to these requirements: the molecular structure is chosen to develop a strong cleaning effect without reacting with the film materials themselves. In practice, this means: no matting effects on gloss films, no dissolution of adhesive seams, and no premature detachment at edges and overlaps.\u003c\/p\u003e\n\u003cp\u003eThe term \"micro-active\" describes the particularly fine distribution of surfactant molecules in the formulation. Due to their small molecular size, the surfactants penetrate deep into dirt layers and dissolve even dried-on insect residues and baked-on bird droppings without the need for mechanical force. This is particularly important for films: strong rubbing and scrubbing, which would be tolerated on a clear coat, can create fine scratches on films or permanently impair the self-healing effect of PPF. Gentle chemistry replaces mechanical force — that's the principle on which film cleaning is based. Another advantage of the solvent-free formulation: the product is suitable for enclosed spaces and car washes with limited ventilation without exceeding VOC (volatile organic compounds) limits. This is a relevant factor for professional detailers working in workshop areas.\u003c\/p\u003e\n\u003cp\u003eMatte paints and matte films place special demands on cleaning chemistry. The matte appearance is created by a microstructured surface that diffusely scatters incident light instead of reflecting it. Any chemical compound that changes this microstructure — by dissolving, filling, or chemical reaction — alters the degree of matte and creates uneven glossy areas. Wax-containing products and silicon-based sealants are therefore unsuitable for matte films. XTREME Film Cleaner contains no waxy components and does not affect the surface structure — it cleans residue-free without changing the matte character.\u003c\/p\u003e\n\n\u003ch3\u003eCorrectly applying XTREME Film Cleaner — the optimal washing workflow for foiled vehicles\u003c\/h3\u003e\n\u003cp\u003eA foiled vehicle requires a different washing workflow than a painted one. The most important basic rule: always start with a pre-wash step that rinses off loose dirt before any cloth or glove touches the surface. Dry sand, brake dust, or coarse dirt particles rubbed over the film can create micro-scratches that are particularly noticeable on matte films and cannot be reversed. A high-pressure cleaner with a distance of 20–30 cm is ideal for the pre-rinse; alternatively, a strong water hose is sufficient to loosen loose dirt. Only after this pre-rinse should the \u003cstrong\u003eSONAX XTREME Film Cleaner\u003c\/strong\u003e be used.\u003c\/p\u003e\n\u003cp\u003eApplication during washing is deliberately kept simple: turn the spray nozzle to the spray setting, generously spray the cleaner onto the wet film, let it sit briefly, and work it in evenly with a soft film washing cloth or microfiber mitt. It is important to always work flat and with light pressure — no circular movements, no force application on stubborn areas. If insect residues or bird droppings do not soften immediately, allow a little more dwell time instead of using more pressure. Rinse thoroughly after working it in. The product must not dry — on hot surfaces or in direct sunlight, the product can form residues that are difficult to remove.\u003c\/p\u003e\n\u003cp\u003eA typical workflow for a fully foiled vehicle looks like this: pre-rinse with a high-pressure cleaner or strong jet of water, then pre-wash the roof, trunk, and sides with XTREME Ceramic Active-Shampoo or a film-compatible shampoo, and in parallel, specifically treat particularly dirty areas — front bumper, hood, sills — with XTREME Film Cleaner. The combination of shampoo for basic cleaning and the special cleaner for problem areas is particularly effective on foiled vehicles because the micro-active surfactant formula has a significantly stronger effect on stubborn organic contaminants (insects, bird droppings) than a regular shampoo. After washing, for the best optical effect, the vehicle should be post-treated with a film-compatible detailer — such as the \u003ca href=\"\/en\/products\/sonax-xtreme-foliendetailer-quick-detailer-folieru\"\u003eXTREME Film Detailer Quick-Detailer for Foiling\u003c\/a\u003e, which adds shine and beading effect to the cleaned surface.\u003c\/p\u003e\n\n\u003ch3\u003eApplication areas — PPF, Vinyl, Matte Paint, and everything in between\u003c\/h3\u003e\n\u003cp\u003eThe world of foiling is diverse, and XTREME Film Cleaner is designed for the entire spectrum. PPF (Paint Protection Film) is the most technically demanding film variant: these transparent protective films have a self-healing polyurethane surface and are sensitive to alcohol- and solvent-based cleaners, which can permanently damage the self-healing effect. The solvent-free formulation of XTREME Film Cleaner is explicitly harmless for PPF — it cleans the surface without penetrating the polyurethane structure. Vinyl films are the most common material for full wraps and partial wraps. They are more robust than PPF, but also sensitive to acids and solvents. Particular caution is required with transparent and light-colored vinyl films, which show discoloration from incorrect chemicals much more visibly than dark colors. Here, too, the XTREME Film Cleaner formulation is designed for material compatibility.\u003c\/p\u003e\n\u003cp\u003eFactory matte finishes are another category that requires special care. Manufacturers such as BMW, Porsche, and Audi have been offering matte paint as a special finish for years — and these are extremely care-intensive. Normal waxes and polishes are taboo because they change the matte structure. XTREME Film Cleaner can also be used without hesitation on these factory matte paints, as it is free of waxy components and does not change the microstructure of the paint. Another area of application is partial wraps — i.e., vehicles where only certain areas are foiled (mirrors, roof frames, spoiler lips, A-pillars). Here, the cleaner must work on both the foiled surface and the adjacent clear coat without creating visible transitions. The film-compatible chemistry of the cleaner can also be used on clear coat without problems, which makes partial wraps particularly easy to treat.\u003c\/p\u003e\n\u003cp\u003eAlso in the commercial sector — at foiling companies and detailers — the cleaner is suitable for final cleaning after a fresh foiling. After a new foiling, adhesive residues, fingerprints, and positioning marks are found on the film, which must be removed. XTREME Film Cleaner gently removes these residues without stressing the foiling, which is only a few days old and whose adhesive has yet to fully bond with the substrate.\u003c\/p\u003e\n\n\u003ch3\u003eFilm cleaner comparison — special cleaner vs. normal shampoo vs. professional care with ceramic sealant\u003c\/h3\u003e\n\u003cp\u003eThe most common question when buying a film cleaner: Isn't a normal car shampoo enough? The answer depends on the type of film and the degree of contamination. For moderately dirty foils with a slight dust film and water spots, a pH-neutral shampoo is certainly suitable. However, as soon as insect residues, baked-on bird droppings, or brake dust film are on the film, a normal shampoo reaches its limits — the cleaning power is simply not enough to dissolve these protein-based and iron-containing deposits. XTREME Film Cleaner is the significantly more effective tool in precisely these situations. It dissolves where a shampoo only wipes. The alternative — rubbing longer and harder with shampoo — is not a good option for films, because mechanical stress does more harm than a stronger cleaner. If you have the choice between more chemistry and more mechanics for films, you should always prefer the chemical solution.\u003c\/p\u003e\n\u003cp\u003eThe comparison with a universal car care cleaner shows another difference: many all-rounders contain wax components, silicones or polymers, which provide gloss effects on painted vehicles, but leave unwanted spots or shiny areas on matte films. XTREME Film Cleaner does not contain these additives — it cleans without residues and leaves the sealing to a separate care product, which can then be specifically chosen for the type of film. After cleaning with XTREME Film Cleaner, the XTREME Film Detailer can be applied to gloss films, and for professional long-term protection on PPF and vinyl, the \u003ca href=\"\/en\/products\/sonax-profiline-ceramiccoating-cc-vinyl-ppf-folien\"\u003ePROFILINE CeramicCoating \"CC\" Vinyl+PPF Film Sealant\u003c\/a\u003e with up to 24 months durability is recommended. This combination — XTREME Film Cleaner for regular cleaning, ceramic sealant for long-term protection — is the most professional approach to film care and maximizes both the optical effect and the durability of the foiling.\u003c\/p\u003e\n\u003cp\u003eAnother point of comparison is hand car wash vs. automatic car wash. Foiled vehicles should generally not be cleaned in automatic portal car washes — the brushes can damage films, and the cleaners used there are optimized for clear coat surfaces, not for films. XTREME Film Cleaner is designed for manual hand washing and completely replaces car wash visits for foiled vehicles. Anyone who regularly washes their vehicle by hand and uses the right cleaner will achieve optimal results over a long period of time and prevent the typical washing damage that occurs in automatic systems.\u003c\/p\u003e\n\n\u003ch3\u003eBuying recommendation — for whom XTREME Film Cleaner is the first choice\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX XTREME Film Cleaner\u003c\/strong\u003e is essential equipment for every foiled vehicle — a must, not an option. Anyone who owns a foiled vehicle and washes it with normal car care products risks damage over time that is expensive to repair: lightened matte areas, swollen film edges, adhesive residues under the film. A specific film cleaner costs a few euros and protects an investment that, depending on the foiling, ranges from a few hundred to several thousand euros. The price-performance ratio is excellent: a 750 ml bottle, with economical dosing, is sufficient for many washes, as the cleaner is only used concentrated on particularly dirty areas, and a normal film-compatible shampoo is sufficient for the basic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor owners of vehicles with PPF film, the cleaner is particularly important because PPF can be permanently impaired in its self-healing properties by incorrect care. Full PPF foiling can quickly cost 3,000 to 6,000 euros or more — a care expense of 10 euros per cleaner is an absolutely justified investment in value retention here. For businesses — foiling workshops, car detailers, dealers with foiled vehicle inventories — XTREME Film Cleaner is a tool that is used daily and quickly proves its worth. The simple spray application directly in the washing process saves time compared to multi-stage cleaning processes and delivers consistent results. For the best overall result, it is recommended to use the film cleaner as part of a complete film care workflow: pre-rinse, XTREME Film Cleaner for problem areas, \u003ca href=\"\/en\/products\/sonax-xtreme-ceramic-activeshampoo-autoshampoo\"\u003eXTREME Ceramic Active-Shampoo\u003c\/a\u003e for basic cleaning, drying with a suitable drying cloth, and subsequent care with the XTREME Film Detailer. This workflow keeps a foiled vehicle in optimal condition long-term and protects the foiling throughout its entire lifespan. At Detailing1, XTREME Film Cleaner is available together with suitable film care accessories — from the right brush to washing cloths and further sealants for professional long-term protection.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"750ml","offer_id":49160886911311,"sku":"D1-SNX-03994000","price":6.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Sonax-XTREME-FolienReiniger-Spezialreiniger-fur-Fo-8.png?v=1721514236"},{"product_id":"carpro-multi-x-multi-purpose-cleaner-universalreiniger-konzentrat","title":"\"Multi X\" Multi-Purpose Cleaner Concentrate","description":"\u003ch2\u003e\u003cstrong\u003eEfficient cleanliness for every surface with \u003cmeta charset=\"utf-8\"\u003eCarPro \"Multi X\" Multi-Purpose Cleaner Concentrate\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCarPro \"Multi X\" Multi-Purpose Cleaner Concentrate\u003c\/strong\u003e is your reliable helper against all types of dirt and contamination. Whether as a pre-wash agent or for deep cleaning at the end of the wash cycle, Multi X impresses with its versatile applicability. With its fresh citrus scent, it also ensures a pleasant cleaning experience. Dilute the concentrate according to requirements and surface to achieve optimal results.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use:\u003c\/strong\u003e For interior and exterior areas as well as the engine compartment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong cleaning performance:\u003c\/strong\u003e Removes stubborn dirt and stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePleasant scent:\u003c\/strong\u003e Fresh citrus scent for a pleasant cleaning experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVersatile application for every need\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eCarPro \"Multi X\" Multi-Purpose Cleaner Concentrate\u003c\/strong\u003e is a true all-rounder. Whether in the interior of your vehicle, on the paint, the rims or in the engine compartment - Multi X ensures thorough cleanliness. Thanks to the concentrated formula, you can individually adjust the dilution and thus always achieve the best cleaning result.\u003c\/p\u003e\n\u003ch3\u003eEfficient dirt removal\u003c\/h3\u003e\n\u003cp\u003eWith Multi X, cleaning becomes child's play. Stubborn dirt and difficult contaminations have no chance. Use Multi X as a pre-wash to loosen coarse dirt, or as a final cleaning to remove even deep-seated dirt. Multi X cleans thoroughly and leaves no residue.\u003c\/p\u003e\n\u003ch3\u003eFresh citrus scent\u003c\/h3\u003e\n\u003cp\u003eIn addition to its strong cleaning performance, the \u003cstrong\u003eCarPro \"Multi X\" Multi-Purpose Cleaner Concentrate\u003c\/strong\u003e also scores with a pleasant citrus scent. This makes every cleaning a pleasant experience. The scent gives your vehicle a fresh touch and creates a pleasant atmosphere during and after cleaning.\u003c\/p\u003e\n\u003c!----\u003e","brand":"CarPro","offers":[{"title":"500ml","offer_id":49163197612367,"sku":"D1-CRP-9210","price":7.63,"currency_code":"EUR","in_stock":false},{"title":"1000ml","offer_id":49163197645135,"sku":"D1-CRP-8186","price":11.13,"currency_code":"EUR","in_stock":false},{"title":"4L","offer_id":49163197677903,"sku":"D1-CRP.14419","price":31.43,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/carpro-multi-x-multi-purpose-cleaner-universalreiniger-konzentrat.png?v=1719085308"},{"product_id":"sonax-profiline-multistar-all-purpose-cleaner-universalreiniger","title":"PROFILINE MultiStar \"All-Purpose-Cleaner\" Universal Cleaner","description":"\u003ch2\u003eA concentrate for all cleaning tasks — SONAX PROFILINE MultiStar\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE MultiStar do? The versatile universal cleaner concentrate dissolves grease, oil, rust film, and general dirt on vehicle surfaces both inside and out — in freely selectable dilutions for varying cleaning intensities, and in large containers up to 200 liters for economical professional use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn detailing centers, car washes, and fleet maintenance facilities, the demand for a reliable, economical universal cleaner is consistently high. Individual products for interiors, exterior paint, engine compartments, rims, and machinery mean increased storage effort, frequent reorders, and unnecessary complexity. The \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is the universal concentrate cleaner for all these applications: an alkaline cleaning formula suitable for most cleaning tasks in vehicle and operational areas at various dilution levels — and, thanks to container sizes from 1 liter to 200 liters, it's economically scalable for any operational scope.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversally applicable due to variable dilution system.\u003c\/strong\u003e MultiStar is supplied as a concentrate and diluted with water before use — the dilution rate determines the cleaning intensity: low dilution (1:5 to 1:10) for heavy soiling such as engine oil, bitumen residues, and stubborn dirt; medium dilution (1:20 to 1:50) for general vehicle cleaning; high dilution (1:50 to 1:100) for more sensitive areas like interior plastics or lighter dirt. One concentrate, many uses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlkaline formula reliably dissolves organic contaminants.\u003c\/strong\u003e MultiStar's alkaline surfactant formula is optimized for dissolving organic contaminants: grease, oil, brake dust, tire abrasion, and general vehicle dirt are loosened and made water-soluble by the combination of alkaline pH and active surfactants. The formula is compatible with most common vehicle surfaces — paint, plastic, rubber, metal, and textile react well to the universal cleaner when properly diluted.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge containers up to 200 liters for economical professional use.\u003c\/strong\u003e Available container sizes range from 1 liter for small businesses and occasional users to 200-liter drums for large operations and car washes. The price per liter significantly decreases with increasing container size, making MultiStar particularly attractive for businesses that use large quantities of cleaner daily. The concentrate concept also significantly reduces transport weight and storage space requirements compared to ready-to-use cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e For effective use, we recommend keeping MultiStar in labeled spray bottles at various dilutions — e.g., 1:10 for engine compartments and rims, 1:30 for general exterior cleaning, 1:50 for interiors. This ensures the correct concentration is always at hand without having to mix new batches every time. Do not use on painted surfaces in direct sunlight or on very hot surfaces — rapid drying of alkaline cleaners can leave streaks. For acid-resistant dirt (lime, mineral residues), \u003ca href=\"\/en\/products\/sonax-profiline-multiclean-acid-kraftreiniger-sauer\"\u003eSONAX PROFILINE MultiClean Acid\u003c\/a\u003e is the better choice, as alkaline cleaners cannot perform acidic dissolution reactions. Always rinse thoroughly to remove cleaning residues — especially on paint and rubber.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eConcentrate technology — why dilution makes MultiStar so flexible\u003c\/h3\u003e\n\u003cp\u003eThe concentrate concept of \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e offers a decisive economic and logistical advantage over ready-to-use cleaners: The cleaning substances (surfactants, alkalis, builders) are supplied in highly concentrated form and only diluted with water at the point of use. This means that a 1-liter concentrate container holds the cleaning substance for 50–100 liters of ready-to-use cleaner — a 1-liter concentrate container has the same cleaning value as a 50-liter container of ready-to-use cleaner, but transports only a fraction of the weight and volume.\u003c\/p\u003e\n\u003cp\u003eThe alkaline action of MultiStar is based on two mechanisms: First, the alkaline pH value (typically pH 9–11 in the concentrate) increases the solubility of organic fat molecules — fats and oils are saponified in an alkaline environment, making them water-soluble and easier to wipe off. Second, the surfactants encapsulate dirt particles through micelle formation and suspend them in the aqueous cleaning solution, so they are carried away with the water during rinsing. This combination is very effective against most organic vehicle contaminants.\u003c\/p\u003e\n\u003cp\u003eThe dilution flexibility allows the same basic cleaner to be used for very different cleaning intensities: In the engine compartment, where stubborn oil and grease are to be removed from hard, heat-resistant surfaces, a strong concentration (1:5) is appropriate and the surfaces tolerate the higher alkalinity. For the vehicle interior, where sensitive plastics, textiles, and Alcantara are treated, a strong dilution (1:50 or more) is necessary to avoid surface damage. The correct ratio is the critical operating skill — too diluted, the cleaner will not be sufficiently effective; too little diluted, it can attack surfaces or leave residues.\u003c\/p\u003e\n\u003cp\u003eFor businesses that use MultiStar in foam lances or high-pressure cleaners, the foaming tendency is relevant: MultiStar foams evenly and adheres well in the foam pre-wash mode when properly diluted and applied, which extends the dwell time on dirty surfaces and improves cleaning performance. Foam consistency can be adjusted by dilution and the use of suitable foam lance nozzles.\u003c\/p\u003e\n\n\u003ch3\u003eApplying MultiStar correctly — dilution ratios for every area of use\u003c\/h3\u003e\n\u003cp\u003eThe application of MultiStar concentrate begins with the correct dilution rate for the respective area of use. For engine washing and heavy exterior dirt: Dilution 1:5 to 1:10 (10–20% concentrate) — spray directly onto the soiled area, allow to dwell for 2–3 minutes, without letting it dry, then rinse with water. For rim cleaning and underbody washing: Dilution 1:10 to 1:20 (5–10% concentrate) — similar application method as for engine washing.\u003c\/p\u003e\n\u003cp\u003eFor general vehicle cleaning and pre-cleaning: Dilution 1:20 to 1:50 (2–5% concentrate) — suitable as a foam lance pre-cleaner or for hand washing with a sponge. This dilution is gentle on paintwork and plastic surfaces and leaves no damaging alkaline residues. For interior cleaning and textiles: Dilution 1:50 to 1:100 (1–2% concentrate) — particularly gentle on sensitive surfaces; always test on an inconspicuous area before widespread use on Alcantara or sensitive coatings.\u003c\/p\u003e\n\u003cp\u003eImportant application notes: Always dilute MultiStar freshly and do not store diluted solutions in spray bottles for long, as diluted alkaline solutions can lose effectiveness over time and become unusable due to germ growth. When working with undiluted concentrate, ensure skin and eye protection — highly concentrated alkaline solutions can cause skin irritation. Store the concentrate itself in dry, cool conditions — in its undiluted state, the concentrate remains stable for several years with proper storage.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application for MultiStar — when the universal cleaner is the most efficient solution\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is particularly efficient in businesses that want to cover a wide range of cleaning tasks with a single product. Detailing businesses with diverse vehicle types (cars, vans, trucks) appreciate the flexibility: A single concentrate unit can be used for the engine compartment of a van, the interior cleaning of a car, and the pre-cleaning of a truck — each with the appropriate dilution. Stockkeeping is simplified, and the ordering process becomes more efficient.\u003c\/p\u003e\n\u003cp\u003eFleet managers and fleet care centers with regular cleaning intervals particularly benefit from the large containers: The 25-liter or 60-liter container allows for continuous supply without frequent reorders, and the more favorable pricing scale for large containers reduces cleaning costs per vehicle. The 200-liter drum size is designed for central cleaning systems where the cleaner is fed directly into machines or foam generators.\u003c\/p\u003e\n\u003cp\u003eCompared to specialized cleaners like \u003ca href=\"\/en\/products\/sonax-profiline-multiclean-alkaline-vorreiniger\"\u003eSONAX PROFILINE MultiClean Alkaline\u003c\/a\u003e — which was developed as an optimized pre-cleaner for cold foam pre-wash — MultiStar offers a broader dilution spectrum and more areas of application, but consequently less specialization in the pre-wash area. Those who exclusively do pre-washing are better served with MultiClean Alkaline; those who are looking for a single cleaner for all tasks are optimally equipped with MultiStar concentrate.\u003c\/p\u003e\n\n\u003ch3\u003eMultiStar in comparison — universal cleaner vs. specialized cleaner in professional operation\u003c\/h3\u003e\n\u003cp\u003eThe question of whether a universal cleaner concentrate like MultiStar or a range of specialized cleaners is the better choice depends on the operational structure. A universal cleaner offers simplicity, cost savings through large containers, and flexibility — ideal for small to medium-sized businesses that do not want to cover every cleaning task with a specialized product. For particularly demanding cleaning tasks (lime removal → acidic cleaner, rims with heavy iron particle contamination → dedicated rim cleaner, sensitive displays → SensitiveSurface Detailer), specialized products are clearly superior.\u003c\/p\u003e\n\u003cp\u003eA proven strategy in well-equipped detailing businesses is a combination: MultiStar as the basic universal cleaner for 80% of all daily cleaning tasks, supplemented by one to three specialized products for applications where the universal cleaner is insufficient. This concept maximizes economic efficiency (one main product in large containers) while simultaneously providing optimal cleaning performance for specific requirements. The combination of MultiStar + MultiClean Acid + dedicated rim cleaner, for example, fully covers the entire spectrum of alkaline and acidic cleaning requirements in the vehicle sector.\u003c\/p\u003e\n\u003cp\u003eCompared to universal cleaners from other manufacturers, SONAX PROFILINE MultiStar offers the advantage of proven system compatibility with other PROFILINE products and a professional formulation designed for the specific requirements of the vehicle segment. Household universal cleaners are often optimized for other surfaces (floors, glass) and can leave residues or streaks on vehicle paint and sensitive plastics. The PROFILINE concentrate is tested for vehicle applications and certified for its compatibility with vehicle surfaces accordingly.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE MultiStar — containers, pricing, and business recommendations\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is available in 1 liter, 5 liter, 10 liter, 25 liter, 60 liter, and 200 liter sizes. For individual users and small businesses, the 1-liter container offers a manageable entry size — the concentrate is economical, and one liter covers several weeks or months for a small business. The 5-liter container is the most economical standard size for medium-sized businesses, while the 25-liter canister is the preferred option for larger businesses with daily demand.\u003c\/p\u003e\n\u003cp\u003eThe pricing scale between the 1-liter and 60-liter containers is significant — the price per 100 ml of concentrate is considerably lower for the 60-liter container than for the 1-liter container. For car washes and fleet maintenance that use several liters of cleaner daily, the investment in the large container quickly pays for itself. The 200-liter drum is designed for industrial cleaning systems and central supply installations where the cleaner is fed directly into dosing pumps or automatic mixing systems.\u003c\/p\u003e\n\u003cp\u003eIn summary, SONAX PROFILINE MultiStar is the most economical choice for businesses seeking a reliable, versatile universal cleaner of professional quality. Its concentrate concept, broad dilution flexibility, and availability in large containers make it the ideal basic cleaner in the PROFILINE range — supplemented by specialized products for particular cleaning requirements.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":53505896055119,"sku":"D1-SNX-6273410","price":8.32,"currency_code":"EUR","in_stock":true},{"title":"2x 1 Liter Set","offer_id":53505896087887,"sku":"D1-SNX-6273410_2","price":16.31,"currency_code":"EUR","in_stock":true},{"title":"3 x 1 Liter Set","offer_id":53505896120655,"sku":"D1-SNX-6273410_3","price":23.96,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":53505896153423,"sku":"D1-SNX-6275050","price":34.32,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":53505904017743,"sku":"D1-SNX-6276000","price":60.87,"currency_code":"EUR","in_stock":false},{"title":"25 liters","offer_id":53505904050511,"sku":"D1-SNX-6277050","price":149.23,"currency_code":"EUR","in_stock":false},{"title":"60 liters","offer_id":53505904083279,"sku":"D1-SNX-6278000","price":510.03,"currency_code":"EUR","in_stock":false},{"title":"200 liters","offer_id":53505904116047,"sku":"D1-SNX-6279000","price":1582.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger.png?v=1730463356"},{"product_id":"koch-chemie-multi-cleaner-mc-universalreiniger-marine-linie","title":"Multi Cleaner \"Mc\" Universal Cleaner (Marine Line)","description":"\u003ch2 data-start=\"40\" data-end=\"114\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003e\u003cstrong data-start=\"0\" data-end=\"69\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eKoch-Chemie Multi Cleaner \"Mc\" – Universal Cleaner (Marine Line)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"116\" data-end=\"270\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThe \u003cstrong data-start=\"4\" data-end=\"38\"\u003eKoch-Chemie Multi Cleaner \"Mc\"\u003c\/strong\u003e is a highly concentrated, phosphate- and solvent-free, alkaline universal cleaner specially developed for deep and gentle cleaning of all surfaces inside and outside boats.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThanks to its strong dirt, grease, and oil carrying capacity, it is ideal for comprehensive boat care.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eSpecial corrosion inhibitors ensure high material compatibility, even with sensitive components such as anodized aluminum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"294\" data-end=\"533\"\u003e\n\u003cli data-start=\"294\" data-end=\"366\"\u003e\n\u003cp data-start=\"296\" data-end=\"366\"\u003e\u003cstrong data-start=\"296\" data-end=\"326\"\u003eVersatile applicability:\u003c\/strong\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eSuitable for all surfaces inside and outside boats.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"367\" data-end=\"430\"\u003e\n\u003cp data-start=\"369\" data-end=\"430\"\u003e\u003cstrong data-start=\"369\" data-end=\"390\"\u003eMaterial-friendly:\u003c\/strong\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eProtects sensitive materials with special corrosion inhibitors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"431\" data-end=\"533\"\u003e\n\u003cp data-start=\"433\" data-end=\"533\"\u003e\u003cstrong data-start=\"433\" data-end=\"454\"\u003eEnvironmentally friendly:\u003c\/strong\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eFree of phosphates and solvents.\u003c\/span\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"535\" data-end=\"538\"\u003e\n\u003ch3 data-start=\"540\" data-end=\"590\"\u003e\u003cstrong data-start=\"544\" data-end=\"590\"\u003eAreas of application and uses\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"592\" data-end=\"790\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThe \u003cstrong data-start=\"4\" data-end=\"38\"\u003eKoch-Chemie Multi Cleaner \"Mc\"\u003c\/strong\u003e is universally applicable and excellent for cleaning gelcoat, plastic, metal, and other sensitive surfaces.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eWhether in the cockpit, on deck, or in the interior – this cleaner reliably removes dirt, grease, and oil without damaging the materials.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eDue to its high material compatibility, it is particularly suitable for sensitive components such as anodized aluminum.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"792\" data-end=\"835\"\u003e\u003cstrong data-start=\"796\" data-end=\"835\"\u003eApplication recommendation and dilution\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"837\" data-end=\"1035\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eDepending on the degree of soiling, the \u003cstrong data-start=\"38\" data-end=\"60\"\u003eMulti Cleaner \"Mc\"\u003c\/strong\u003e should be diluted with water in a ratio of 1:10 to 1:50.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eCleaning is done by applying the solution with a sponge, brush, or scrubber, followed by thorough rinsing or wiping with a damp cloth.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eIt is important not to let the solution dry and to check material compatibility before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1037\" data-end=\"1081\"\u003e\u003cstrong data-start=\"1041\" data-end=\"1081\"\u003eSpecial properties and advantages\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"1083\" data-end=\"1241\"\u003e\u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eThe \u003cstrong data-start=\"4\" data-end=\"26\"\u003eMulti Cleaner \"Mc\"\u003c\/strong\u003e is characterized by its highly concentrated, alkaline formula, which effectively removes dirt, grease, and oil.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eDespite its strong cleaning power, it is gentle on materials and protects sensitive components with special corrosion inhibitors.\u003c\/span\u003e \u003cspan class=\"relative -mx-px my-[-0.2rem] rounded px-px py-[0.2rem] transition-colors duration-100 ease-in-out\"\u003eIts environmental friendliness is emphasized by the absence of phosphates and solvents.\u003c\/span\u003e\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":55181770654031,"sku":"D1-KCX-515001","price":13.29,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 ml","offer_id":55181770686799,"sku":"D1-KCX-515001_2","price":26.05,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":55181770719567,"sku":"D1-KCX-515001_3","price":38.28,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":55181770752335,"sku":"D1-KCX-515010","price":100.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-multi-cleaner-mc-universalreiniger-marine-linie.png?v=1748281237"},{"product_id":"koch-chemie-the-finisher-marine-allways-allesreiniger","title":"THE FINISHER \"AllWays\" All-Purpose Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"AllWays\" — All-purpose cleaner for marine pre-cleaning \u0026amp; deck care\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use AllWays for on board? — The marine all-purpose cleaner carefully loosens salt film, grease, spray and harbor dirt, wets evenly, rinses residue-free, and safely prepares gelcoat, non-skid decks, fender areas, and storage compartments for further care.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER AllWays All-Purpose Cleaner\u003c\/strong\u003e is your versatile pre-cleaning step for boats: it softens salt and harbor dirt, oily film, and rubber scuffs, creeps into edges and profiles, and rinses off cleanly – without greasy residue. On gelcoat, non-skid decks, painted consoles, rubber strips, and in durable storage compartments, it quickly gets the surface \"ready to go\" before CleanMarine (shampoo), SeaYou (glass), and BodyGuard (spray protection) take over. This keeps the care chain on board clearly separated, reproducible, and fault-tolerant.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Pre-Cleaning:\u003c\/strong\u003e Carefully loosens salt\/spray film, oily harbor haze, and rubber marks (fenders\/ropes) to make the main wash easier and less prone to scratches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck \u0026amp; Gelcoat Compatible:\u003c\/strong\u003e Stable film with good creeping ability on non-skid and smooth gelcoat; rinses off thoroughly and leaves an even base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-clean on board:\u003c\/strong\u003e Perfect bridge to CleanMarine (contact wash), SeaYou (visible surfaces) and BodyGuard (hydrophobic finish); vinyl\/textile remain reserved for VinylTexClean and CoverGuard respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMarine Pre-Cleaning – Salt, Harbor Haze \u0026amp; Rubber Scuffs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine pre-cleaning\u003c\/strong\u003e means chemically separating the typical mix of salt, spray, diesel\/oil mist, and rubber marks. THE FINISHER AllWays All-Purpose Cleaner forms an even film that adheres well in profile edges, around fittings, and along the waterline, without running off quickly. Salt and organic residues are bound in micelles and reliably removed during rinsing; rubber scuffs from fenders and ropes can be visibly reduced after a short softening period and light brushing. Because the cleaner dries cleanly, the subsequent wash starts without streaking, and BodyGuard can adhere evenly later. On sensitive metals or old, porous seals, work with short dwell times and a small test area to ensure the appearance and feel remain calm.\u003c\/p\u003e\n\u003ch3\u003eDeck \u0026amp; Gelcoat – Safely clean non-skid, relieve waterline\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDeck \u0026amp; Gelcoat\u003c\/strong\u003e demand control, not harshness. On non-skid areas, the fine-foaming film lifts dirt from the texture without smoothing the surface; a soft deck brush supports the mechanics, then rinse generously. On smooth gelcoat, the hardtop hood, and around the waterline, the cleaner carefully loosens harbor haze, splashes, and light soot stains; when moved in a crosshatch pattern with a pad\/brush, no patchy areas are created. Treat fender marks and black scuffs in sections, work quickly in the shade, and rinse completely. For clear window surfaces, SeaYou remains responsible, as AllWays can cause unnecessary rework on plastic panes; for visible yellowing before finishing, a separate, material-compatible brightening routine helps before BodyGuard provides hydrophobic ease of care.\u003c\/p\u003e\n\u003ch3\u003eApplication \u0026amp; Safety – Dosage, Dwell Time, Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u0026amp; Safety\u003c\/strong\u003e follow a simple logic: cool surface, shade, pre-wetting. Spray THE FINISHER AllWays All-Purpose Cleaner in sections, let it work for 2-3 minutes, agitate with a brush if necessary, and then rinse generously with fresh water. Do not let it dry – wind, sun, and hot surfaces shorten dwell times. The cleaner works reliably in storage compartments, on painted consoles, and rubber strips; for bare, sensitive metals and anodized parts, test briefly and keep the dwell time short. Clean vinyl upholstery and textile elements separately with VinylTexClean; after complete drying, CoverGuard protects heavily used textile areas. Windows and instrument covers remain with SeaYou to prevent streaking. Use CleanMarine for contact washing and top with BodyGuard if necessary – this ensures predictable and repeatable care on board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie “AllWays” — All-purpose cleaner\u003c\/h2\u003e\n\u003ch4\u003eOn which marine surfaces do I use AllWays?\u003c\/h4\u003e\n\u003cp\u003eOn gelcoat, non-skid decks, painted consoles, rubber strips, and in durable storage compartments. Clean vinyl upholstery, textiles, and windows separately (VinylTexClean\/CoverGuard or SeaYou).\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent stains on non-skid?\u003c\/h4\u003e\n\u003cp\u003eWork in the shade, apply sparingly, let it loosen briefly, agitate with a soft brush, and rinse completely. Do not let it dry; wash out residual dirt with CleanMarine.\u003c\/p\u003e\n\u003ch4\u003eDoes AllWays help against fender marks?\u003c\/h4\u003e\n\u003cp\u003eYes, rubber scuffs can be significantly reduced after a short softening and light agitation. Stubborn old marks may require a second, quick pass.\u003c\/p\u003e\n\u003ch4\u003eIs the cleaner suitable for plastic windows?\u003c\/h4\u003e\n\u003cp\u003eNo, SeaYou is intended for that. AllWays can cause rework on polycarbonate\/acrylic; always treat visible surfaces separately.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in the engine room?\u003c\/h4\u003e\n\u003cp\u003eFor \"light-duty\" yes: cool down, protect electrically sensitive areas, spray precisely, agitate with a brush, and rinse moderately. Remove residues completely.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300987318607,"sku":"D1-KCX-77109","price":8.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-marine-allways-allesreiniger_500ml_77109-500ML-01.png?v=1761918092"},{"product_id":"koch-chemie-the-finisher-marine-cleanmarine-bootsshampoo","title":"THE FINISHER \"CleanMarine\" Boat Shampoo","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"CleanMarine\" — Boat Shampoo for Salt-Free, Smooth Surfaces\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does CleanMarine do on board? — The pH-balanced boat shampoo safely removes salt and harbor film, builds a highly lubricious wash film, promotes clean rinsing, and preserves existing protective layers. For gelcoat, painted surfaces, and smooth plastics – fast, controlled, low-streak.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER CleanMarine Boat Shampoo\u003c\/strong\u003e is the straightforward main wash for smooth gelcoat and high-gloss painted surfaces. The surfactant base encapsulates salt, spray, and organic residues, while lubricating additives significantly reduce friction during contact. This allows for safer washing, cleaner rinsing, and preservation of existing waxes or spray sealants. Ideal after a brief pre-cleaning (AllWays) and before a hydrophobic finish with BodyGuard – for a surface that visibly stays fresh longer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSalt \u0026amp; Spray Under Control: \u003c\/strong\u003eEncapsulates residues and rinses them away without residue – fewer water spots, a calmer finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Lubricity:\u003c\/strong\u003e Reduces friction during brushing\/washing and helps prevent micro-scratches – especially on dark, smooth surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLSP-Friendly:\u003c\/strong\u003e Preserves wax and spray protection instead of stripping it; perfect base for BodyGuard as a seasonal topper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBoat Shampoo – Salt Film, Foam Stability \u0026amp; Lubricating Additives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBoat shampoo\u003c\/strong\u003e like CleanMarine combines an efficient, yet material-friendly surfactant formula with controlled foaming. Salt crystals and harbor film are bound in micelles, allowing you to rinse them away without streaking. The resulting wash film remains lubricious for a long time, carries dirt out of pores and edges, and facilitates the safe movement of a wash mitt or soft deck brush. Because the formula is pH-balanced, the shine and hydrophobic effect of existing wax or spray layers are preserved – the result looks calm, clean, and feels smooth.\u003c\/p\u003e\n\u003ch3\u003eApplication On Board – Pre-Rinse, Wash, Rinse\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e starts in the shade on cool surfaces. First, pre-rinse with fresh water until salt and loose debris run off. Dose CleanMarine according to instructions, lather it in a bucket, and wash section by section from top to bottom. For non-skid areas, move a soft brush crisscross; for smooth gelcoat\/painted surfaces, use a wash mitt in long strokes without pressure. Do not let the shampoo dry, rinse generously, and let it air dry or wipe with a clean cloth. Afterwards, perfect visible surfaces with SeaYou; clean and care for vinyl\/textile separately.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; Care Plan – Gelcoat, Non-Skid, Protective Build-up\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e includes smooth gelcoat, high-gloss maritime painted panels, and smooth plastics. Non-skid is safely cleaned without \"smoothing\" the texture. For matte or rough special surfaces, test first and apply without pressure. For seasonal logic, apply: Pre-cleaning (AllWays) → CleanMarine as the main wash → optional PerfectOne\/WaxPolish for optical saturation → BodyGuard as a hydrophobic, quickly renewable finish. This keeps the surface cleaner for longer, makes rinsing easier, and ensures reproducible care – even with intense sun exposure and salt loads.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie \"CleanMarine\" — Boat Shampoo\u003c\/h2\u003e\n\u003ch4\u003eDoes CleanMarine attack existing waxes?\u003c\/h4\u003e\n\u003cp\u003eNo. The pH-balanced formula is LSP-friendly and preserves wax and spray protection. You can refresh hydrophobicity after washing with BodyGuard.\u003c\/p\u003e\n\u003ch4\u003eAlso suitable for non-skid?\u003c\/h4\u003e\n\u003cp\u003eYes. Work crisscross with a soft brush and rinse thoroughly. The shampoo cleans without affecting slip resistance.\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent water spots?\u003c\/h4\u003e\n\u003cp\u003eWash cool in the shade, do not let it dry, rinse generously, and if necessary, dry with a clean cloth afterwards. Always remove salt with fresh water beforehand.\u003c\/p\u003e\n\u003ch4\u003eCan I clean plastic windows with it?\u003c\/h4\u003e\n\u003cp\u003eFor polycarbonate\/acrylic, it's better to use SeaYou. CleanMarine is the main shampoo for the hull and deck, not the specialist for windows.\u003c\/p\u003e\n\u003ch4\u003eHow often to wash?\u003c\/h4\u003e\n\u003cp\u003eAs needed: after every trip with a lot of spray or regularly weekly during the season. A short freshwater rinse between washes reduces build-up.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56301200638287,"sku":"D1-KCX-77105","price":20.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-marine-cleanmarine-bootsshampoo__1000ml_77105-1L-01.png?v=1761919254"},{"product_id":"tuga-chemie-teufels-reiniger-universalreiniger","title":"Teufels-Reiniger® Universal Cleaner","description":"\u003ch2\u003eAlkaline Removal of Grease, Oil, and Nicotine Film with TUGA Chemie's Teufels-Reiniger\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Teufels-Reiniger? An alkaline all-purpose cleaner from TUGA Chemie that is diluted 1:50 to 1:5 depending on the degree of soiling. For engine bays, soiled bumpers, floor mats, door sills, sealed plastic surfaces, and as a snow foam pre-wash. Not suitable for Alcantara, open-pore leather, unprotected displays, polished aluminum without subsequent rinsing, and long dwell times on clear coat under direct sunlight.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-teufels-reiniger-hero.png?v=1775839916\" alt=\"TUGA Chemie Teufels-Reiniger 1L spray bottle with yellow liquid and red spray trigger on concrete forecourt in front of black Porsche 911 with open rear\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTeufels-Reiniger\u003c\/strong\u003e is an alkaline surfactant concentrate with a pH value of approximately 12 to 13, which chemically converts organic contaminants—such as grease, oil, nicotine film, body oils, pollen glue, and oil-based road grime—making them water-soluble. The active surfactant combination works in two ways: it saponifies fats through hydrolysis, while surface-active surfactants encapsulate the dissolved residues and keep them suspended in the wash solution. The crucial point is the variable dilution. Instead of a fixed mixing ratio, you decide, depending on the contamination, whether to use 1:50 for quick floor mat cleaning, 1:10 for a normal engine bay, or 1:5 to neat for stubborn oil and grease stains. One concentrate thus replaces five different ready-to-use cleaners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable dilution range from 1:50 to neat.\u003c\/strong\u003e Its efficiency makes Teufels-Reiniger economically attractive for workshops and frequent users. A 5-liter canister, when diluted 1:10, yields approximately 55 liters of ready-to-use solution, and over 250 liters when diluted 1:50. You only need to store one bottle instead of separate products for each application—saving shelf space, costs, and decision-making time at work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDissolves grease and oil chemically, not mechanically.\u003c\/strong\u003e Unlike mechanical scrubbing methods, the alkaline chemistry of Teufels-Reiniger works without physical effort. Spray on, let it dwell, rinse off—in most cases, the dissolved dirt comes off with rinsing. This reduces micro-scratches on plastic and painted surfaces that would occur with scrubbing using a sponge.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable from engine bay to interior.\u003c\/strong\u003e Teufels-Reiniger works on engine blocks, plastic trim, wheel arch liners, door sills, floor mats, rubber coverings, and sealed dashboard plastics. The same chemistry, different dilutions—this flexibility replaces a collection of individual cleaners in the garage or workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1 Pro Tip:\u003c\/strong\u003e Before each use, test on an inconspicuous area to ensure the material tolerates the alkaline chemistry—especially with older rubber seals, colored plastics, and untreated aluminum components. For the engine bay, always work on a hand-warm engine; never spray on hot surfaces. Otherwise, the solution will dry within seconds, leaving white alkali streaks that you will then have to wash off with clear water and a lot of patience. After each use, rinse thoroughly with clear water—alkaline residues on paint, polished aluminum, and chrome will leave dull grey hazes after drying, which can only be removed with polishing.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDilute. Spray. Wipe.\u003c\/h3\u003e\n\n\u003cp\u003eTeufels-Reiniger works in three steps, which remain identical for every application: Prepare the ready-to-use solution, spray it onto the soiled area, and after a short dwell time, rinse or wipe off. The correct dilution is the only point where you need to be mindful.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-teufels-reiniger-anwendung.png?v=1775839922\" alt=\"Teufels-Reiniger being sprayed with a nitrile glove onto a Porsche 911 engine bay cover\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor floor mats and light interior dirt, 1:50 is sufficient. This is 20 ml of concentrate per liter of warm water—mixed in an empty spray bottle, sprayed onto the mat, allowed to dwell for two minutes, worked with a brush or microfiber cloth, then rinsed with clear water. For rubber mats, rinsing alone is often enough. For normal engine bay use after a season, mix 1:10—i.e., 100 ml per liter. Spray onto the cold engine block, plastic covers, and wheel arch liners, let it dwell for three to five minutes, work into crevices with a detailing brush or a soft brush, then rinse with a low-pressure stream from a garden hose. You should cover electrical components, the fuse box, and alternator areas before spraying—the cleaner itself is not conductive, but rinsing with water can temporarily disrupt contact points and cause error messages in the control unit.\u003c\/p\u003e\n\n\u003cp\u003eFor the most stubborn cases—baked-on oil-grease mixtures on engine covers, encrusted floor mats after a winter with road salt and grime, bitumen splashes on wheel arch liners—use 1:5 or neat directly from the spray bottle. In these cases, the dwell time should be limited to a maximum of three minutes, and always work in the shade. Under direct sunlight, the solution will dry before it has fully worked, making cleaning more difficult than necessary. The \u003ca href=\"\/en\/products\/tuga-chemie-insekten-teufel-insektenentferner\"\u003eInsekten-Teufel\u003c\/a\u003e and Teufels-Reiniger in combination are also a common workflow: Insekten-Teufel for the front end, Teufels-Reiniger for the rest of the front section—both rinse each other off without issues.\u003c\/p\u003e\n\n\u003ch3\u003eEngine and Floor Mats Yes. Alcantara No.\u003c\/h3\u003e\n\n\u003cp\u003eTeufels-Reiniger's strength lies in its versatility, not its universality. It reliably dissolves organic contaminants but encounters definite limits: Alcantara and microfiber suede imitations do not tolerate alkaline cleaners; the fibers will mat and permanently lose their velvety surface structure. Premium leather with open-pore treatment will be leached and cracked—a pH-neutral leather cleaner should be used there, not an alkaline all-purpose product. Unprotected displays, touchscreens, and coated instrument clusters should only be treated with a slightly damp microfiber cloth without cleaner, as alkaline chemistry can permanently damage anti-reflective coatings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-teufels-reiniger-ergebnis.png?v=1775839929\" alt=\"Matte clean black plastic engine cover with Porsche emblem after cleaning without residues or streaks\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eLong-term use on polished aluminum without rinsing is also excluded. Polished aluminum, chrome, and colored anodized components react with strong alkalis and, after just a few minutes of dwell time without rinsing, develop dull spots or a milky haze that can only be removed with polishing paste. If you want to detail an engine bay with highly polished intake manifolds or chrome valve covers, you should use a diluted solution, limit the dwell time to under one minute, and then immediately rinse thoroughly with plenty of clear water. Teufels-Reiniger is not suitable as a wheel cleaner in the classic sense—for that, there's the \u003ca href=\"\/en\/products\/tuga-chemie-alu-teufel-spezial-gruen-felgenreiniger\"\u003eAlu-Teufel Spezial Grün\u003c\/a\u003e, which works with a lower pH and surfactants optimized for iron particles. And for delicate interior plastics, the \u003ca href=\"\/en\/products\/tuga-chemie-kunststoff-teufel-innenraumreiniger\"\u003eKunststoff-Teufel\u003c\/a\u003e is the specialized alternative if you want to clean and condition simultaneously.\u003c\/p\u003e\n\n\u003cp\u003eAnother common application error is mixing with acidic cleaners in the same spray bottle or directly on the surface. Alkaline Teufels-Reiniger and acidic wheel cleaners chemically neutralize each other within seconds, completely losing their effectiveness. If you work on a wheel with Alu-Teufel Rot and then the wheel arch with Teufels-Reiniger, you must rinse thoroughly with clear water between the two steps—otherwise, the second product will work against the residues of the first, and you'll waste chemicals. The same mistake regularly occurs when cleaning transport vehicles with combined alkaline and acidic applications: always allow a thorough water break in between, and always work with the lower pH value first.\u003c\/p\u003e\n\n\u003ch3\u003eThe All-Rounder for Workshops and Hobby Detailers\u003c\/h3\u003e\n\n\u003cp\u003eTeufels-Reiniger is the right choice for anyone who wants to cover the majority of cleaning tasks with a single cleaner. Typical areas of application include workshops, car detailers, club garages, and ambitious hobby detailers who regularly tackle various degrees of contamination—from weekly floor mat wipes to major spring engine bay washes after winter. The 5-liter container is the economical option for those who reach for an all-purpose cleaner several times a month, while the 1-liter spray bottle is the suitable size for individual vehicles and occasional use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-teufels-reiniger-lineup.png?v=1775839935\" alt=\"TUGA Chemie Teufels-Reiniger 5 liter canister and 1 liter spray bottle side by side on concrete forecourt\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eTeufels-Reiniger becomes particularly useful in combination with other TUGA products: as a pre-wash via a snow foam lance on a pressure washer for dirty transporters, as a cleaner for door jambs and entry areas before the actual hand wash, as a stain remover on textile floor mats, and as a degreaser in the engine bay before sealing. In a workshop environment, it often replaces three to four specialized cleaners, which quickly justifies the savings given a typical monthly consumption of ten to twenty liters of ready-to-use solution. If you're using Teufels-Reiniger for the first time, it's best to start with 1:20 as a medium dilution and adjust the dosage after the first results—too diluted and you'll notice a lack of cleaning power, too concentrated and you'll see white hazing after drying. A quick test on an inconspicuous area before major use will save you rework with polish later. A complete overview of all suitable all-purpose cleaners can be found in the \u003ca href=\"\/en\/collections\/allzweckreiniger\"\u003eAll-Purpose Cleaners\u003c\/a\u003e category.\u003c\/p\u003e","brand":"TUGA Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56957068575055,"sku":"D1-TUG-TR1D","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":56957068607823,"sku":"D1-TUG-TR5D","price":32.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-chemie-teufels-reiniger-universalreiniger.png?v=1770285359"},{"product_id":"tuga-chemie-tugalan-universalreiniger-konzentrat","title":"Tugalan® Universal Cleaner Concentrate","description":"\u003ch2\u003eUniversal Dilution with Tugalan Concentrate from TUGA Chemie\u003c\/h2\u003e\n\n\u003cp\u003eTugalan is the alkaline universal cleaner concentrate from TUGA Chemie and is one of the inconspicuous workhorses in German detailing operations. For us at Detailing1, it's the product that sits on the workshop shelf when a single specialized cleaner is no longer enough. One bottle, one concentrate, a dozen applications. From a heavily soiled hood to an oily workshop floor, from the exterior of a motorhome to a greasy vehicle bay. The basic formula is the same; only the mixing ratio changes. This is why the product has been used for decades in fleets, independent workshops, and cleaning companies. It doesn't replace every specialized cleaner, but it covers 70 percent of all everyday tasks with a single container.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-tugalan-universalreiniger-konzentrat-hero.png?v=1775844346\" alt=\"TUGA Chemie Tugalan 5-liter canister with amber-colored concentrate and green label on a concrete forecourt in front of a black Porsche 911\" loading=\"lazy\"\u003e\n\n\u003cblockquote\u003eA good concentrate is not a panacea, but an honest basic cleaner. The difference to a ready-to-use product is not in its effectiveness, but in storage space and cost per liter of final solution.\u003c\/blockquote\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable dilution from 1:5 to 1:50.\u003c\/strong\u003e For heavy soiling in the engine bay, you use a strong dosage; for final plastic care, a weak one. One canister thus covers the entire range of common cleaning tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlkaline against oil, grease, and insects.\u003c\/strong\u003e The surfactant-supported, mildly alkaline basic formula reliably dissolves organic contaminants — from insect residues on the front end to dried silicone oil in the wheel arch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry standard from Lower Saxony.\u003c\/strong\u003e Tugalan has been produced by TUGA Chemie in Goslar since the 1970s and is a quiet reference for economical basic cleaners in everyday workshop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIts effectiveness is based on a combination of anionic and non-ionic surfactants, alkaline builders, and solubilizers. The pH value of the undiluted concentrate is approximately 12 to 13; in working dilution, depending on the dosage, it ranges between 9 and 11. This weak to moderately strong alkalinity is sufficient to saponify fatty acid compounds and dissolve organic dirt without attacking paint or anodized surfaces. The high active ingredient content is why one liter of concentrate yields between 10 and 50 liters of working solution, depending on the dilution. The cost per square meter of cleaned surface is thus significantly lower than any ready-to-use universal cleaner from a hardware store. In fleet operations, this is the decisive cost factor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Use a two-bucket system when cleaning larger surfaces. One bucket with the working solution, one bucket with clear water for wringing out the sponge. This prevents you from reapplying dissolved dirt to the freshly cleaned surface. For dosage, a marked 5-liter watering can or a mixing cup with a scale is useful. Freehand dosing by eye almost always leads to excessively high concentrations, which leaves streaks and a sticky surfactant film. Our rule of thumb: first test the weakest sensible dilution, then increase if necessary. For most vehicle exterior cleanings, 1:20 is perfectly sufficient; for engine bays and heavily soiled wheel arches, it goes to 1:10; for interior plastic cleaning, 1:40 or weaker is enough.\u003c\/p\u003e\n\n\u003ch3\u003eDilute. Dose. Apply. Rinse.\u003c\/h3\u003e\n\n\u003cp\u003eThe application is simple, the order remains crucial. First, roughly pre-clean the surface to be cleaned or pre-wet it with a high-pressure cleaner so that loose particles are already rinsed off. Stir the concentrate into lukewarm water depending on the degree of soiling. Never work on hot surfaces, as the alkaline solution will otherwise dry within seconds and leave marks. Apply with a spray bottle from workshop supplies or a large sponge, let it soak for one to three minutes, wipe off with a microfiber cloth or rinse with clear water. The foam is deliberately controlled so that the product adheres to vertical surfaces such as hoods and door edges for a few seconds without immediately running off. For interior cleaning with low dilution (1:40 or weaker), a damp cloth is sufficient for wiping, no rinsing is necessary. For exterior applications and on horizontal workshop surfaces, always rinse with clear water to prevent surfactant residues from drying on.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-tugalan-universalreiniger-konzentrat-anwendung_ba28cf76-476a-4a70-8867-eaaeece4577c.png?v=1775860881\" alt=\"Tugalan concentrate being poured from the canister into a measuring cup with a scale, next to a professional bucket and spray bottle for dilution\" loading=\"lazy\"\u003e\n\n\u003cp\u003eA point that sooner or later becomes apparent in every workshop: Tugalan deliberately foams little. At first glance, this may seem like a disadvantage, but in practice, it is intentional. Strong foam psychologically conveys cleaning power, but it only means there is a lot of air in the solution. The actual work is done by the surfactants in their dissolved state, not in a foam bed. When using Tugalan for the first time and seeing the thin, almost foam-free working film, one might briefly think the product is too weakly dosed. A look at the dissolved grease on the cloth proves the opposite. This is precisely why Tugalan is not a typical foam party for the car wash, but a workshop cleaner for targeted applications on the vehicle and at the workplace. The low foam formation also has the practical side effect that you need to rinse less, which saves noticeable time when cleaning multiple vehicles per day in fleet operations.\u003c\/p\u003e\n\n\u003ch3\u003eNot on hot. Not on bare aluminum. Not neat.\u003c\/h3\u003e\n\n\u003cp\u003eTugalan is a basic cleaner, not a multi-talent for all surfaces. It has no place on uncoated aluminum, polished chrome parts, and open-pored leather surfaces, as the alkalinity can promote corrosion or leaching of the fat liquor. On hot surfaces in the summer sun, the solution dries in seconds and leaves dull spots that can only be removed mechanically. Application neat, i.e., undiluted, is also not intended. The concentrate is designed to be brought to working concentration with water. Applying the concentrate directly to the surface will result in excessively high alkalinity and surfactant residues, which will later appear as a sticky film. Always test first in an inconspicuous area, especially on painted surfaces, plastic trim strips, and textiles. Particular caution is advised with tinted films, vinyl decals, and matte painted body parts, as the mildly alkaline solution can attack the coating in the long term if used too frequently or too concentrated. Gloves are mandatory, safety glasses are recommended, and in case of skin contact, rinse with plenty of water.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-tugalan-universalreiniger-konzentrat-ergebnis.png?v=1775844358\" alt=\"Freshly cleaned Porsche 911 rear with louvre grille and polished exhaust tailpipe after Tugalan application\" loading=\"lazy\"\u003e\n\n\u003cp\u003eAnother point many users underestimate is the shelf life of the working solution. The diluted working solution cannot be stored indefinitely and loses its effectiveness after a few days because the surfactants slowly hydrolyze and the alkaline builders are neutralized by atmospheric carbon dioxide. We therefore recommend always preparing the working solution fresh and not saving the rest at the end of the workday. The concentrate itself, however, is stable in storage and, when stored sealed and upright, will easily last two to three years. The temperature should be between five and thirty degrees; frost should be avoided. The typical amber coloration of the concentrate comes from the dissolved surfactants and is not an indication of contamination or aging. Some batches are slightly lighter, others darker; the effectiveness remains identical.\u003c\/p\u003e\n\n\u003ch3\u003eThe Concentrate for Workshops and Fleet Operations\u003c\/h3\u003e\n\n\u003cp\u003eIn the TUGA Chemie product range, Tugalan is the economical workhorse cleaner for anyone who regularly cleans larger surfaces. It complements the specialized \u003ca href=\"https:\/\/detailing1.de\/products\/tuga-chemie-tugalin-glas-teufel-glasreiniger\"\u003eTugalin Glass Cleaner\u003c\/a\u003e for the final clarity step on windows and displays, the \u003ca href=\"https:\/\/detailing1.de\/products\/tuga-chemie-kunststoff-teufel-innenraumreiniger\"\u003eKunststoff-Teufel\u003c\/a\u003e for heavily used cockpits, and fits into the \u003ca href=\"https:\/\/detailing1.de\/collections\/universalreiniger\"\u003eUniversal Cleaners section\u003c\/a\u003e as well as the \u003ca href=\"https:\/\/detailing1.de\/collections\/tuga-chemie\"\u003eTUGA Chemie overview\u003c\/a\u003e. The classic application combination in our workshops looks like this: Tugalan for rough pre-cleaning of surfaces, Kunststoff-Teufel for finer detail work on the cockpit, Tugalin for final glass cleaning. This way, you cover the complete interior and exterior workflow with three TUGA products.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-tugalan-universalreiniger-konzentrat-lineup.png?v=1775860888\" alt=\"TUGA Chemie Tugalan 5-liter canister with measuring cup, Grit-Guard bucket, and spray bottle in a workshop setup on a concrete forecourt\" loading=\"lazy\"\u003e\n\n\u003cp\u003eTugalan is available exclusively as a 5-liter canister with a black handling cap. This is the only sensible container size, because the product only develops its cost-efficiency above a certain consumption volume. For occasional home use, a concentrate is the wrong choice; a ready-to-use all-purpose cleaner is better for everyday use there. For workshops, fleet operators, car dealerships, cleaning companies, motorhome rental companies, and anyone who details multiple vehicles per week, Tugalan is the mathematically most economical option. From a 5-liter canister, with an average 1:20 dilution, about 100 liters of working solution are produced; at 1:40, even 200 liters. With proper use and a sealed container, the canister is stable for at least 24 months. This makes Tugalan a workshop product with a clear statement: unspectacular in appearance, reliable in effect, honest in consumption ratio. A classic for everyone who doesn't need ten special bottles on the shelf, but a basic cleaner they can rely on.\u003c\/p\u003e","brand":"TUGA Chemie","offers":[{"title":"5 liters","offer_id":56957234544975,"sku":"D1-TUG-TU5D","price":35.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/tuga-chemie-tugalan-universalreiniger-konzentrat_5-liter.png?v=1770155575"},{"product_id":"gyeon-q2m-apc-allzweckreiniger","title":"Q²M APC All-Purpose Cleaner","description":"\u003ch2\u003eOne Cleaner for Everything – GYEON Q²M APC All-Purpose Cleaner\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M APC? GYEON Q²M APC is a highly concentrated all-purpose cleaner for all vehicle areas – depending on the dilution, it can be used for stubborn stains in the interior, exterior pre-washing, engine bay cleaning, and much more, with a single product.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFor those who don't want a separate specialized product for every cleaning task, \u003cstrong\u003eGYEON Q²M APC\u003c\/strong\u003e offers a powerful alternative. As a highly concentrated all-purpose cleaner, it covers a wide range of applications through variable dilution: heavily diluted for delicate interior materials, less diluted for stubborn stains and dirt on tires or in the engine bay, undiluted for extreme contamination. One concentrate – many applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable dilution for maximum flexibility.\u003c\/strong\u003e Q²M APC can be used differently depending on the task: 1:10 for interior and delicate textiles, 1:5 for rubber seals and plastics, 1:2 or undiluted for engine bay cleaning, wheel arches, and stubborn exterior dirt. One product replaces many specialized cleaners.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowerful against grease, oil, and organic contaminants.\u003c\/strong\u003e Q²M APC effectively tackles greases, oils, insects, bird droppings, and organic residues – even without aggressive use of acids or strong alkalis. The formulation is designed for use on vehicles and protects surfaces when correctly diluted.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcentrated product – economical in use.\u003c\/strong\u003e APC concentrate offers excellent value for money: one liter of concentrate yields up to 10 liters of ready-to-use cleaner (at 1:10 dilution). This makes GYEON Q²M APC one of the most economical cleaners in the detailing range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For interior cleaning, always start with the lowest effective dilution and increase if necessary – this protects materials such as Alcantara, Nappa leather, or coated plastics. Never apply APC undiluted to sensitive surfaces. For exterior use as a pre-cleaner before the actual wash with \u003ca href=\"\/en\/products\/gyeon-q2m-bathe-autoshampoo\"\u003eQ²M Bathe\u003c\/a\u003e – this loosens coarse dirt beforehand and significantly facilitates subsequent hand washing.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eAreas of Application: Where Q²M APC Excels in Practice\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M APC is one of the most versatile cleaners in detailing. Typical areas of application: interior cleaning (dashboard, door panels, plastic or fabric seats), carpet and textile pre-cleaning before \u003ca href=\"\/en\/products\/gyeon-q2m-fabric-cleaner-textilreiniger\"\u003eQ²M FabricCleaner\u003c\/a\u003e, tire cleaning as preparation for tire care, wheel arch cleaning, engine bay cleaning for moderate contamination, removal of insects and bird droppings as a pre-spray before washing, and cleaning of sills and underbodies. Not suitable for sealed or polished paint surfaces when used without subsequent coating.\u003c\/p\u003e\n\n\u003ch3\u003eThe Dilution Strategy: Correctly Dosing Q²M APC\u003c\/h3\u003e\n\u003cp\u003eThe versatility of Q²M APC lies in its concentration and variable dilution. The basic rule is: the more delicate the surface, the more diluted. For Alcantara and leather: 1:10 to 1:20 – minimally aggressive, yet effective. For carpets and fabric seats: 1:5 to 1:10 – sufficiently strong for stain removal. For plastics, seals, and exterior rubber: 1:3 to 1:5. For tires, wheel arches, and engine bay: 1:2 to undiluted. For stubborn oil stains or industrial contamination: spray directly undiluted, let it sit briefly, then rinse with water.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M APC as a Pre-Cleaner in Complete Vehicle Detailing\u003c\/h3\u003e\n\u003cp\u003eIn professional vehicle detailing, an All-Purpose Cleaner is indispensable. GYEON Q²M APC is typically used in the preparation phase: pre-clean all surfaces before the actual paint polishing, loosen insects and bird droppings, remove grip and grease marks from the interior. The next step is \u003ca href=\"\/en\/products\/gyeon-q2m-tar-redefined-harzentferner-teerentferner\"\u003eQ²M Tar\u003c\/a\u003e for tar and resin residues, \u003ca href=\"\/en\/products\/gyeon-q2m-iron-redefined-flugrostentferner\"\u003eQ²M Iron\u003c\/a\u003e for rust removal, and \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e as a final degreaser before coating.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M APC vs. Specialty Cleaners: When is an APC Sufficient?\u003c\/h3\u003e\n\u003cp\u003eAn all-purpose cleaner can fulfill many cleaning tasks, but not all equally well. Q²M APC is excellent for general cleaning tasks and moderate contamination. For specialized tasks, specialized products are more effective: For heavy rust, \u003ca href=\"\/en\/products\/gyeon-q2m-iron-redefined-flugrostentferner\"\u003eQ²M Iron\u003c\/a\u003e is significantly more effective (reactive iron remover); for insect infestations, \u003ca href=\"\/en\/products\/gyeon-q2m-bug-and-grime-insektenentferner\"\u003eQ²M Bug\u0026amp;Grime\u003c\/a\u003e is the better pre-wash; and for heavy leather stains, \u003ca href=\"\/en\/products\/gyeon-q2m-leather-cleaner-strong-lederreiniger-stark\"\u003eQ²M LeatherCleaner Strong\u003c\/a\u003e is recommended. Q²M APC ideally complements these specialized products as a universal basic cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eBuying Recommendation: Q²M APC – The Indispensable Basic Product\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M APC is a must-have product for every detailing collection. The combination of high efficiency, concentration, and versatility makes it one of the best value-for-money products in the entire Q²M range. As a supplement for complete interior cleaning, we recommend \u003ca href=\"\/en\/products\/gyeon-q2m-fabric-cleaner-textilreiniger\"\u003eQ²M FabricCleaner\u003c\/a\u003e for textiles and \u003ca href=\"\/en\/products\/gyeon-q2m-leather-cleaner-natural-lederreiniger-mild\"\u003eQ²M LeatherCleaner Natural\u003c\/a\u003e for leather care – together with Q²M APC, they create an efficient, complete interior cleaning combination.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57019413135695,"sku":"D1-GYEON-Q2MAPC1000","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"4 liters","offer_id":57019413168463,"sku":"D1-GYEON-Q2MAPC4000","price":52.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-apc-allzweckreiniger.png?v=1770929607"},{"product_id":"sonax-profiline-all-purpose-cleaner-foam-universalreiniger","title":"PROFILINE All-Purpose Cleaner \"Foam\" Universal Cleaner","description":"\u003ch2\u003eAll-Purpose Cleaner in Foam Format — SONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is an All-Purpose Cleaner Foam and what is it used for? The \u003cstrong\u003eSONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e is a foam-based all-purpose cleaner in a 400ml spray can format — the foam keeps the cleaner on vertical surfaces, increases its dwell time, and allows cleaning of textiles, plastics, carpets, and interior surfaces with a single product.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn a vehicle's interior, most surfaces are vertical or steeply angled: door panels, A-pillars, dashboards, and seatbacks. Traditional liquid cleaners run off these surfaces immediately, having little dwell time before dripping to the floor. The \u003cstrong\u003eSONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e solves this problem with a different product format: as a spray foam, it adheres to vertical surfaces, keeping the cleaning agent where it's needed. The stable foam significantly increases the dwell time on hard-to-reach and vertical surfaces — without runoff, without product waste. The 400ml spray can format is a compact, ready-to-use solution for professional interior cleaning.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFoam-bound active ingredient for maximum dwell time on vertical surfaces.\u003c\/strong\u003e The APC Foam adheres to the surface after spraying and continuously releases the cleaning agent for several minutes. This extended dwell time is particularly important for crusted stains, dried-on dirt, and grease deposits on plastic surfaces — the active substances have time to emulsify dirt particles before wiping with a cloth. The result is a more thorough cleaning with less mechanical effort.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile on textiles, plastics, carpets, and interior surfaces.\u003c\/strong\u003e A true all-purpose cleaner doesn't require different products for various interior surfaces: The APC Foam cleans plastic dashboards, fabric seats, Alcantara surfaces, velour carpets, rubber seals, and synthetic leather with the same application technique. This reduces product inventory in the workshop and simplifies interior cleaning to a single product for almost all surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact spray can format for quick access and clean handling.\u003c\/strong\u003e The 400ml format is designed for mobile use and quick availability: The can fits in any tool bag and is ready for immediate use without decanting or dilution. Unlike concentrated products that need to be measured and filled into spray bottles, the APC Foam is ready to use directly from the can — ideal for mobile detailers and for quick interim cleaning between preparation steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Spray the PROFILINE APC Foam onto the surface to be cleaned, let it dwell for 1–2 minutes, and wipe off with a lightly damp microfiber cloth. On textiles and carpets, it's recommended to work the foam in with a soft brush before wiping — this more thoroughly loosens dirt bound in the fabric fibers. On delicate surfaces like Alcantara or light fabrics, test first in an inconspicuous area. For pre-cleaning before a \u003ca href=\"\/en\/products\/sonax-profiline-fabriccoating-textilimpragnierung\"\u003eSONAX PROFILINE FabricCoating Textile Impregnation\u003c\/a\u003e, the APC Foam is a good choice — it cleans thoroughly without aggressive solvents that could damage the textile structure.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFormulation of APC Foam — Foam-Bound Cleaning and pH Value\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ePROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e contains a combination of surfactants and emulsifiers, which is brought to a stable foam consistency in a spray can formulation with propellant gas. The surfactants of the APC Foam are designed for a wide range of dirt: they emulsify fats and oils (typical stains on steering wheels and gear knobs), dissolve dust bonds on plastic (the typical \"sticky film\" on old dashboards), and aid in the mechanical removal of dried-on dirt on carpets.\u003c\/p\u003e\n\n\u003cp\u003eThe pH value of APC Foam is in the slightly alkaline range — strong enough to clean effectively, but gentle enough for sensitive surfaces like Alcantara and colored textiles. Strongly acidic or strongly alkaline cleaners would attack the color of Alcantara and damage its characteristic suede look. The mild formulation of APC Foam is adapted to the versatile requirements of the vehicle interior.\u003c\/p\u003e\n\n\u003cp\u003eA technical aspect often neglected in everyday use: shaking before use is more important for spray foam products than for liquid cleaners. The propellant gas and active ingredient can separate in the can if it stands unused for a long time. A vigorous 5–10 second shake before use ensures uniform foam quality and optimal cleaning performance. If sprayed without shaking, often almost pure propellant gas without the active ingredient is released first — which results in no cleaning effect after the supposed \"first spray.\"\u003c\/p\u003e\n\n\u003cp\u003eThe foam of the APC Foam is formulated to remain stable for 2–4 minutes after application and then slowly collapse into a slightly damp, cleaning-active layer. This collapse point is the ideal moment for mechanical cleaning with a cloth or brush: the cleaner has then thoroughly penetrated the surface, and the loosened dirt can be completely removed.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of APC Foam — Interior Cleaning, Surfaces, and Dwell Time\u003c\/h3\u003e\n\n\u003cp\u003eThe standard procedure for interior cleaning with APC Foam: shake the can, spray evenly onto the surface to be cleaned (distance approx. 15–20 cm), let it dwell for 1–3 minutes, wipe with a soft microfiber cloth, and dry with a dry cloth if necessary. On carpets and upholstery, it is recommended to mechanically work the foam in with a soft brush before wiping — this removes deeper embedded dirt more effectively than just wiping.\u003c\/p\u003e\n\n\u003cp\u003eFor heavily soiled or odorous textile areas (e.g., driver's carpets with dirt residue, back seats with children's stains), a double application is recommended: spray on the first layer and work it in, roughly wipe off with a dry cloth, then apply a second layer for finish cleaning. This two-layer method removes stubborn stains that were only loosened during the first pass and are completely removed during the second pass.\u003c\/p\u003e\n\n\u003cp\u003eA frequently used application in a professional setting is spot treatment: individual stains on upholstery or carpets can be treated specifically with APC Foam without cleaning the entire seating area. The foam can be precisely sprayed onto the stain without wetting the adjacent clean area. This is particularly practical in daily car dealership operations, where an exhibition vehicle needs to be in perfect condition again quickly after customer contact — without requiring a complete interior cleaning. Individual fingerprints on Alcantara, fresh coffee stains on the carpet floor mat, or dirt marks on the steering wheel can be removed in minutes.\u003c\/p\u003e\n\n\u003cp\u003eIn professional detailing operations, APC Foam can be used for quick interior cleaning between exterior detailing and vehicle handover: 10–15 minutes for cleaning the most important interior surfaces (dashboard, door panels, carpets) with APC Foam, and the vehicle is in a ready-to-deliver condition — without a complete deep cleaning process.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for APC Foam — Interior, Trunk, and Detail Cleaning\u003c\/h3\u003e\n\n\u003cp\u003eThe APC Foam covers all textile and hard surfaces in the vehicle interior: dashboards and center consoles made of hard plastic, door panels with fabric or synthetic leather, seat surfaces made of fabric or Alcantara, textile headliners, carpeted areas on the floor and in the trunk, and rubber seals on doors and windows. For each of these surfaces, APC Foam is sufficient as a single product — no product changes, no additional measuring of concentrates.\u003c\/p\u003e\n\n\u003cp\u003eSpecial care is required when using it on headliners: The headliner is often made of a textile material with an adhesive layer underneath. Cleaning too wet or allowing cleaners to act too long can, in older vehicles, dissolve the adhesive layer, leading to the headliner detaching. The APC Foam is gentle enough for headliners if applied sparingly and not used in excess. Short dwell time (1 minute) and gentle dabbing instead of rubbing protects the headliner adhesive. For very old vehicles or headliners that are visibly already slightly detached, aggressive wet cleaning should be avoided entirely.\u003c\/p\u003e\n\n\u003cp\u003eOutside the interior, APC Foam is also suitable for quick detail cleaning on exterior parts: engine bay plastic trims, trunk carpets, and trunk liners can be cleaned with the same product. Use on metal surfaces is possible, but not the primary application — for painted surfaces and rims, there are more specialized products in the PROFILINE range.\u003c\/p\u003e\n\n\u003ch3\u003eAPC Foam in Comparison — All-Purpose Cleaners in the PROFILINE Range\u003c\/h3\u003e\n\n\u003cp\u003eIn the PROFILINE interior cleaning range, APC Foam complements other cleaning products: The \u003ca href=\"\/en\/products\/sonax-profiline-innenreiniger-innenraumreiniger\"\u003eSONAX PROFILINE Interior Cleaner\u003c\/a\u003e is a classic liquid interior cleaner for basic cleaning with a spray bottle; the \u003ca href=\"\/en\/products\/sonax-profiline-cleanstar-ecocert-innenraumreiniger\"\u003eSONAX PROFILINE CleanStar \"Ecocert\"\u003c\/a\u003e is the environmentally certified, mild all-rounder for sensitive surfaces. The APC Foam complements these as the format for fast, vertical surface cleaning — where a liquid cleaner does not adhere efficiently.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses that regularly clean many vehicle interiors, APC Foam is a useful addition to a concentrate-based interior cleaner: the concentrate for large-area basic cleaning, the APC Foam for detail cleaning in hard-to-reach or vertical areas. The combination of both product formats efficiently covers all interior cleaning requirements.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SONAX PROFILINE All-Purpose-Cleaner \"Foam\" — for Interior Cleaning and Detail Preparation\u003c\/h3\u003e\n\n\u003cp\u003eThe 400ml format of APC Foam is ideal for mobile detailers, interior cleaning professionals, and businesses looking for a compact interior cleaning solution for quick preparation. The spray can format makes handling particularly convenient: no decanting, no diluting, ready to use immediately. Dosing via the spray head of the can is well controllable — too much foam on sensitive surfaces can be easily dosed.\u003c\/p\u003e\n\n\u003cp\u003eStoring aerosol products like APC Foam requires observing some basic rules: Temperatures above 50 °C (e.g., inside a vehicle in summer or near radiators) can increase the internal pressure of the can and lead to damage. Therefore, the can should not be stored in direct sunlight and should not be left in hot vehicles. With proper storage below 25 °C and away from direct heat sources, the product is stable and storable without restrictions.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses with very high interior cleaning requirements, the combination of APC Foam for details and a larger interior cleaner concentrate for basic cleaning is recommended — so APC Foam is not the daily mass consumption cleaner, but the special product for quick, precise applications. As a verified SONAX specialist dealer at Detailing1, the PROFILINE APC Foam is available in the regular assortment.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"400 ml","offer_id":57344925073743,"sku":"D1-SNX-2743000","price":7.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-all-purpose-cleaner-foam_400ml.png?v=1774730099"},{"product_id":"sonax-profiline-cleanstar-ecocert-innenraumreiniger","title":"PROFILINE CleanStar \"Ecocert\" Interior Cleaner","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003eEcologically certified professional interior cleaner for all surfaces — SONAX PROFILINE CleanStar \"Ecocert\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does Ecocert certification mean for a vehicle cleaner? Ecocert is an independent institution that tests cleaning and care products for natural ingredients and ecological compatibility. The PROFILINE CleanStar carries this certificate — with 99.75% ingredients of natural origin and a pH-neutral value of 6.5–7.5.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eToday, vehicle interiors are built with increasingly sensitive materials: Alcantara, leather, matte plastics, chrome trim strips, and touchscreen surfaces require cleaners that are tough on dirt but gentle on the material. The \u003cstrong\u003eSONAX PROFILINE CleanStar \"Ecocert\"\u003c\/strong\u003e is precisely designed for this area of application: a ready-to-use universal interior cleaner that can clean all surfaces in the vehicle interior — from textile seats to leather, glass, and plastic — and relies on an Ecocert-certified formula with 99.75% natural ingredients. Available in 5-, 25-, and 200-liter containers: the product for businesses that need an ecologically sound cleaning solution on a large scale.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEcocert-certified — tested natural ingredients.\u003c\/strong\u003e Ecocert certification is not a marketing claim, but an independent review by an accredited certification institute. CleanStar \"Ecocert\" consists of 99.75% ingredients of natural origin — anionic and amphoteric surfactants of plant-based origin, without synthetic solvents. The pH range of 6.5–7.5 is gentle on all common interior surfaces; neither leather, Alcantara, nor glass surfaces are attacked by the pH-neutral cleaner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal interior cleaner for all surfaces — one product instead of many.\u003c\/strong\u003e CleanStar cleans interior glass panes, textile seats, leather, Alcantara, plastics (painted and unpainted), rubber, and metal trim. This universality saves changeover time and product storage in professional use: instead of grabbing a separate product for each surface, the detailer works with a single bottle throughout the entire interior. When applying, proceed from sensitive to robust surfaces — a dirty cloth from plastic does not harm glass, and vice versa, it is less critical than with highly abrasive cleaners.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional container sizes from 5 to 200 liters for businesses of all sizes.\u003c\/strong\u003e The PROFILINE CleanStar is available in three large containers: 5 liters for smaller workshops and mobile detailing, 25 liters for medium-sized businesses, and 200 liters for large customers, car dealership chains, and fleet maintenance businesses. The availability in a 200-liter drum makes the product a practical long-term solution for industrial interior cleaning needs — without frequent reorders and with corresponding quantity advantages in price.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e When using on the vehicle headliner, never spray directly onto the surface — always onto the microfiber cloth. The headliner often consists of glued layers; direct spray mist can loosen the adhesive due to moisture penetration. For Alcantara, use the cloth with light pressure and always in one direction (in the direction of the fibers) — no circular movements that roughen the fibers. For interior glass, apply CleanStar to a dry microfiber cloth and wipe in overlapping horizontal passes; then polish with a second dry cloth. For a complete interior cleaning, maintain a clear workflow: ceiling → windows → dashboard → doors → seats → floor. This way, no cleaned area is re-contaminated by subsequent cleaning steps.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eEcocert certification and natural ingredients — what distinguishes SONAX PROFILINE CleanStar \"Ecocert\" from conventional cleaners\u003c\/h3\u003e\n\n\u003cp\u003eEcocert certification is the key difference between CleanStar and other SONAX PROFILINE interior cleaners. Ecocert is a French certification institute that has been testing and certifying natural and organic products according to defined standards since 1991. For a cleaning product, Ecocert certification means: the ingredients must come from a high percentage of natural or naturally derived sources; synthetic solvents, petrochemical derivatives, and certain preservatives are not allowed or are severely restricted. CleanStar meets these requirements with a 99.75% share of natural ingredients.\u003c\/p\u003e\n\n\u003cp\u003eThe surfactants in CleanStar are plant-based — anionic and amphoteric surfactants made from renewable raw materials (mostly coconut or palm oil derivatives). These plant-based surfactants have a comparable cleaning profile to synthetic counterparts, but significantly better biodegradability in wastewater. For businesses that operate their wastewater management under ecological standards or aim for environmental certifications, the biodegradability of the ingredients is a relevant criterion in product selection.\u003c\/p\u003e\n\n\u003cp\u003eAnother relevant aspect of the natural formula: odor emissions. Conventional interior cleaners with synthetic solvents often have a sharp chemical odor that lingers in the vehicle interior after cleaning and can be unpleasant for customers — especially during vehicle handovers. Thanks to its plant-based surfactants, CleanStar has a significantly milder, fresh inherent odor that completely dissipates after a short ventilation. For car dealerships and businesses that value a pleasant smell after interior cleaning, this is a noticeable difference in the customer experience.\u003c\/p\u003e\n\n\u003cp\u003eThe pH value of 6.5–7.5 is crucial for material compatibility. Many aggressive interior cleaners work in the alkaline range (pH 8–11), which results in high dirt-dissolving power but dries out leather, damages Alcantara, and attacks coated plastics. CleanStar, on the other hand, in the nearly neutral pH range, can be safely used on all the mentioned materials — it protects the surfaces while providing good cleaning performance for normal vehicle dirt (dust, fingerprints, beverage residues). For very heavy soiling (blood, motor oil, tar), stronger, non-Ecocert-certified cleaners are often more effective; for daily and maintenance needs, CleanStar is optimally positioned.\u003c\/p\u003e\n\n\u003cp\u003eThe preservatives in CleanStar — 2-Bromo-2-nitropropane-1,3-diol, 1,2-Benzisothiazolin-3-one, and Methylisothiazolinone — are the only aspect that sensitive users might pay attention to: these preservatives can cause skin irritation in some people. However, they are present in very low concentrations (significantly below the legally permitted maximum values) and are harmless for professional use with normal hand protection. Ecocert certification does not exclude these preservatives in acceptable quantities — they are necessary to ensure product stability over the storage period.\u003c\/p\u003e\n\n\u003ch3\u003eApplying CleanStar \"Ecocert\" — Ready-to-use cleaner for all interior surfaces\u003c\/h3\u003e\n\n\u003cp\u003eCleanStar \"Ecocert\" is ready to use — no dilution necessary. This direct-use concept is a clear advantage for professional use: no measuring, no mixing, direct use from the bottle. Spray the product directly onto a microfiber cloth (SONAX recommends the microfiber cloth for windows+interior) and apply to the surface to be cleaned. The foam development of the spray is moderate — no excessive foaming that would be difficult to remove from upholstery.\u003c\/p\u003e\n\n\u003cp\u003eThe application process for a complete vehicle interior: work from top to bottom. First, clean the vehicle headliner with a sparing amount on the cloth, then interior windows, dashboard and cockpit plastics, door panels, seats, and finally floor mats and floor. Regularly rinse the cloth in fresh water and spray with new product — a heavily soiled cloth transfers more dirt than it absorbs. For stubborn dirt in a specific area, apply the cleaner to the cloth several times and let it work; the key is patience instead of pressure.\u003c\/p\u003e\n\n\u003cp\u003eOn glass (windshield, side windows, interior mirror), CleanStar is particularly effective for the streak-free film that forms on the inside of windows in vehicles with a lot of plastic outgassing. This silicone-containing film from plastic fumes is stubborn and difficult to remove with many universal cleaners. CleanStar, with its amphoteric surfactants, dissolves the greasy film more efficiently than purely anionic cleaners. For the optimal glass effect, use a dry polishing cloth until no streaks are visible.\u003c\/p\u003e\n\n\u003cp\u003eFor children's vehicles, patient transport, and commercial vehicles with frequently changing passengers, CleanStar is particularly suitable, as the natural ingredients pose less risk of irritation from unintentional skin contact than synthetic cleaner alternatives. The Ecocert formula is a preferred choice for end customers who have sensitive skin or react to synthetic chemicals in the vehicle interior. This aspect of product safety is particularly relevant for businesses that maintain fleets for kindergartens, nursing services, or medical transport services.\u003c\/p\u003e\n\n\u003cp\u003eFor Alcantara, a special application technique applies: Alcantara is a microfiber synthetic fiber with a textile structure that can be permanently damaged by incorrect cleaning (roughening, shining). Spray CleanStar onto the cloth (not onto Alcantara), then wipe with light pressure in the direction of the fibers (typically from top to bottom on seats). No circular movements. Wipe wet-on-wet with a slightly damp, clean cloth to remove residues. After drying, raise the Alcantara fibers with a soft clothes brush.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional container sizes — 5, 25, and 200 liters for every business scale\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE CleanStar \"Ecocert\" is available in three container sizes, tailored to different business sizes. The 5-liter canister is the entry point for smaller detailing businesses, mobile detailing, and well-equipped hobby detailers with high consumption: 5 liters of ready-to-use cleaner are sufficient for 50–100 complete vehicle interior cleanings with economical use. The canister size is handy enough for transport in the vehicle and fits in most toolboxes.\u003c\/p\u003e\n\n\u003cp\u003eThe 25-liter container size is designed for medium-sized detailing businesses with 5–20 vehicles daily. A 25-liter canister lasts about 4–6 weeks for 5 vehicles per day, depending on the intensity of cleaning. The price advantage over the 5-liter canister is already clearly noticeable with this container size — the cost per liter decreases significantly, resulting in relevant cost savings over the year in continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eWith the 25-liter container size, it is worthwhile to fill the product into spray bottles at filling stations or using a burette dosing system, instead of working directly from the canister. This saves product through precise dosing and prevents leakage from a large canister into narrow spray bottles. Simple dosing pumps for 5- and 25-liter canisters are cheaply available in detailing accessory stores and quickly pay for themselves through product savings.\u003c\/p\u003e\n\n\u003cp\u003eThe 200-liter drum is aimed at large-scale operations, car dealership chains, and fleet maintenance services with very high cleaning volumes. A 200-liter drum accordingly requires a stationary tap or a dosing pump, which is available as an accessory. For businesses that clean 20–50 vehicles daily, the 200-liter drum reduces the reorder frequency to a few times per year and avoids the logistical costs of frequent small orders. The price per liter for the drum is again significantly cheaper than for the smaller containers.\u003c\/p\u003e\n\n\u003ch3\u003eCleanStar \"Ecocert\" in comparison — PROFILINE vs. Consumer and vs. Interior Detailer Concentrate\u003c\/h3\u003e\n\n\u003cp\u003eThe direct comparison with the consumer variant, the \u003ca href=\"\/en\/products\/sonax-cleanstar-ecocert-innenraumreiniger\"\u003eSONAX CleanStar \"Ecocert\"\u003c\/a\u003e in 750 ml: The formula is identical — same Ecocert certification, same natural ingredients, same pH neutrality. The difference lies exclusively in the container size and packaging concept: The 750 ml bottle is designed for private users with 1–2 vehicles, the PROFILINE container for professional use with correspondingly higher consumption. Anyone who already knows and appreciates the consumer variant will find the same product in the PROFILINE version in a professional container size with cost advantages in continuous use.\u003c\/p\u003e\n\n\u003cp\u003eCompared to the \u003ca href=\"\/en\/products\/sonax-profiline-interior-detailer-concentrate-innenraumreiniger\"\u003eSONAX PROFILINE Interior Detailer Concentrate\u003c\/a\u003e, a clear positioning difference emerges: The Interior Detailer Concentrate is a concentrate (dilutable 1:10 to 1:50), not Ecocert-certified, and has an antistatic active component that CleanStar does not. Those who value ecological certification and a ready-to-use solution opt for CleanStar. Those who want to adapt the cleaner individually to different degrees of soiling and consider antistatic protection important choose the Interior Detailer Concentrate. For businesses with a sustainability strategy, CleanStar is the future-proof choice.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-sensitivesurface-detailer-innenraumreiniger\"\u003eSONAX PROFILINE SensitiveSurface Detailer\u003c\/a\u003e is the specialist product for the most sensitive materials — Alcantara, velour, high-quality leather variants. Where CleanStar is sufficient for 95% of interior cleaning tasks, the SensitiveSurface Detailer is recommended for the remaining 5% with particularly delicate surfaces. In practice, a combination is ideal: CleanStar for standard interiors, SensitiveSurface Detailer as a supplement for special materials.\u003c\/p\u003e\n\n\u003ch3\u003eBuying ecological interior cleaner — for whom SONAX PROFILINE CleanStar \"Ecocert\" is the right choice\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE CleanStar \"Ecocert\"\u003c\/strong\u003e is the ideal choice for professional detailing businesses that select their cleaning products according to ecological and sustainability-oriented criteria. Businesses with ISO 14001 certification or similar environmental management standards can use CleanStar as clear product evidence for the use of natural ingredients in their documentation. Businesses that are positioned in sustainable car care or want to appeal to corresponding customers also benefit from the clear Ecocert promise in customer communication.\u003c\/p\u003e\n\n\u003cp\u003eIn the context of environmental and sustainability initiatives, CleanStar is interesting for businesses that document their CO₂ footprint and chemical use. Plant-based surfactants typically have a lower CO₂ equivalent value in production than petrochemical derivatives; biodegradability in wastewater reduces the environmental impact in the disposal path. For businesses that want to win ecological tenders (e.g., municipal fleet maintenance or public transport companies), the use of Ecocert-certified products can be a demonstrable quality feature in bid documentation. Detailing1 can provide product data sheets and safety information for CleanStar for tender documents upon request. Another aspect concerns employee satisfaction: strong-smelling or skin-irritating cleaners are stressful in daily use. CleanStar is formulated to be skin-friendly and has a neutral inherent odor that does not affect the working atmosphere. This makes it particularly suitable for businesses that detail many vehicles daily and pay attention to the long-term health compatibility of the products used.\u003c\/p\u003e\n\n\u003cp\u003eFor car dealerships and leasing companies with their own detailing department, the 25- or 200-liter container is the most economically viable solution: a uniform product range, predictable reorder intervals, and a cleaner that works for all vehicle interiors and all materials — without special products for each segment. As a verified SONAX specialist dealer, Detailing1 permanently carries the PROFILINE CleanStar \"Ecocert\" in all three container sizes.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"5 liters","offer_id":57344938705231,"sku":"D1-SNX-2535050","price":26.55,"currency_code":"EUR","in_stock":true},{"title":"25 liters","offer_id":57344938737999,"sku":"D1-SNX-2537050","price":112.47,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":57344938770767,"sku":"D1-SNX-2539000","price":1154.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-cleanstar-ecocert_5l.png?v=1774730626"}],"url":"https:\/\/detailing1.co.uk\/en\/collections\/universalreiniger.oembed","provider":"Detailing1","version":"1.0","type":"link"}