{"title":"Cockpit \u0026 Polster am Boot mit THE FINISHER","description":null,"products":[{"product_id":"koch-chemie-the-finisher-marine-vinyltexclean-vinyl-textilreiniger","title":"THE FINISHER \"VinylTexClean\" Vinyl\/Textile Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner for Cockpit, Bench \u0026amp; Cabin\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat makes VinylTexClean ideal on board? — The vinyl\/textile cleaner pulls salt film, sunscreen and everyday residue off in a controlled way, dries streak-free and keeps the grippy feel of marine vinyl and hard-wearing fabrics. Perfect as the prep step before VinylGuard or TexLock\/CoverGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER VinylTexClean vinyl\/textile cleaner\u003c\/strong\u003e is the on-target cleaner for marine vinyl upholstery, console trim and hard-used fabric areas in cockpit and cabin. The pH-balanced, fine-foaming formula lifts sunscreen, salt and drink residue safely, without drying out the surface or leaving it smeary. The result: clean, grippy material with a factory-fresh look – perfectly set up for the care and protection that follow.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl \u0026amp; fabric handled: \u003c\/strong\u003eCuts through sunscreen and salt film plus everyday stains, dries down calmly and keeps the natural grip of seats and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreak-free \u0026amp; controlled:\u003c\/strong\u003e Fine foam for precise work without over-wetting; ideal on upholstery, trim and carpet zones in cabin and cockpit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong in the system:\u003c\/strong\u003e The perfect base for \u003cem\u003eVinylGuard\u003c\/em\u003e (vinyl care) and \u003cem\u003eTexLock\/CoverGuard\u003c\/em\u003e (fabric protection) – and it makes future cleans noticeably easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVinyl\/textile cleaner – lift salt, lotion \u0026amp; everyday grime safely\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003evinyl\/textile cleaner\u003c\/strong\u003e like THE FINISHER VinylTexClean works with mild surfactants and controlled foam: residue gets bound into micelles while the surface stays cool and grippy. On marine vinyl you lift sunscreen film, sweat and salt haze without a greasy shine; on tough fabrics you pull stains without over-soaking the fibres. The product flashes off residue-free so the care and protection products that follow can grab evenly – for a calm, clean cockpit look.\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – dose, dwell, wipe clean\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e: Work in the shade with the surfaces cool. Put the product on a microfibre cloth, or for heavier soiling spray it sparingly onto the area, let it dwell briefly and work it with a soft brush or cloth. Wipe off straight away with a clean side of the cloth, go over it with a slightly damp fibre if needed and pull it dry. Avoid over-wetting so you don't get streaks. Plastic windows (polycarbonate\/acrylic) belong to „SeaYou“ – don't clean those with this.\u003c\/p\u003e\n\u003ch3\u003eFinish \u0026amp; system – prepping for care and protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinish \u0026amp; system\u003c\/strong\u003e: After cleaning, the surface stays grippy-clean, not greasy. Then condition the vinyl areas in the cockpit with „VinylGuard“ for a rich, non-smeary look. Lock down heavily used fabric zones (seat surfaces, carpet runners, berth entry and exit) with „TexLock“ or „CoverGuard“ once fully dry. That cuts down re-soiling, and future washes go noticeably faster.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use VinylTexClean on?\u003c\/h4\u003e\n\u003cp\u003eOn marine vinyl upholstery, console and cabin trim, and hard-wearing fabrics. Keep it off leather, delicate Alcantara areas and plastic windows.\u003c\/p\u003e\n\u003ch4\u003eHow do I avoid water or dirt rings?\u003c\/h4\u003e\n\u003cp\u003eDose sparingly, let it dwell briefly, wipe off with a fresh side of the cloth and go over it dry. Don't work in the sun and don't let it dry on.\u003c\/p\u003e\n\u003ch4\u003eDoes the cleaner change the feel?\u003c\/h4\u003e\n\u003cp\u003eNo, it leaves a grippy-clean surface with no smeary film. For a visual refresh and protection afterwards, use „VinylGuard“ or „TexLock\/CoverGuard“.\u003c\/p\u003e\n\u003ch4\u003eDoes it help against salt haze?\u003c\/h4\u003e\n\u003cp\u003eYes. Salt and spray film are lifted safely and wiped off streak-free – provided you use clean cloths and work in the shade.\u003c\/p\u003e\n\u003ch4\u003eCan I use it off the boat too?\u003c\/h4\u003e\n\u003cp\u003eYes, on comparable vinyl\/textile surfaces with marine-grade toughness. For automotive interiors, reach for „InsideUp“ or „LeatherTexClean“ depending on the material.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300945473871,"sku":"D1-KCX-77107-500ML-01","price":13.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77107-500ML-01_1.png?v=1778249513"},{"product_id":"koch-chemie-the-finisher-marine-vinylguard-vinylpflege","title":"THE FINISHER \"VinylGuard\" Vinyl Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care with a satin-matt, grippy feel\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use VinylGuard for on board? — The vinyl care conditions marine vinyl after cleaning, freshens the look back to satin-matt, cuts down on fresh dirt pickup (sunscreen or salt, say) and keeps a dry, non-greasy feel – spot-on for the bench seat, backrests \u0026amp; trim panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e is the pinpoint conditioning for marine vinyl in the cockpit and cabin. After cleaning with VinylTexClean, \u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e lays down an ultra-thin care film that visibly calms colour depth and evens things out, without going glossy or greasy. \u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e keeps that grippy-dry feel, makes future cleans easier and holds the factory-fresh look steady even with constant skin, salt and sunscreen contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin-matt OEM finish:\u003c\/strong\u003e Rich, even look with no plasticky shine; the feel stays dry and grippy – perfect for seating surfaces and backrests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEveryday protection on board:\u003c\/strong\u003e The care film keeps sunscreen, sweat and salt from grabbing hold; makes the next clean easier and slows down how fast dirt comes back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine system fit: \u003c\/strong\u003eApply after VinylTexClean; on fabric surfaces, top up with TexLock\/CoverGuard if you like – clean separation, repeatable results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVinyl care on board – finish, feel \u0026amp; the loads it takes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVinyl care\u003c\/strong\u003e on boats has to calm the look without turning slippery. The finely dosed polymer emulsion in THE FINISHER VinylGuard Vinyl Care cross-links thin on the surface, smooths out micro-texture and brings back that satin-matt evenness. Unlike oily dressings, it leaves no greasy film that grabs dust and sand. The usual loads from sunscreen, sweat and salt shed better day-to-day, because the surface no longer „clings“ and residue wipes off quicker. Seat bolsters, lounging areas and trim panels look rich and calm once buffed off, and they stay dry to the touch – exactly the feel you want on board.\u003c\/p\u003e\n\u003ch3\u003eHow to use – prep, lay it on thin, buff off clean\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e comes down to getting the base right: clean first (VinylTexClean), let it dry fully. Then put a few squirts of THE FINISHER VinylGuard Vinyl Care onto a soft applicator pad or microfibre cloth and spread it evenly in small sections. Let it flash off for 1–2 minutes and buff to a satin-matt finish with a fresh side of the cloth. Work in the shade on cool surfaces, don’t overdose and keep product from pooling in seams. On heavily used seat zones, two very thin passes beat one heavy one. Keep it off floors and anti-slip decks – a care film has no business there.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – keeping the cockpit fresh, planning your care intervals\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eResult\u003c\/strong\u003e is a calm, evenly satin-matt vinyl with a natural grip. In use, a damp cloth is often enough to lift fingerprints and salt haze; for a deeper clean go back to VinylTexClean, and when the freshness fades, lay on a thin coat of VinylGuard again. Depending on use (sun, swim days, charter), the rhythm falls between 4 and 8 weeks. Deal with existing yellowing or old build-up separately up front (a targeted material clean, say), then THE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care takes care of the steady, everyday look.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care\u003c\/h2\u003e\n\u003ch4\u003eWhere do I use VinylGuard?\u003c\/h4\u003e\n\u003cp\u003eOn marine vinyl: bench seats, backrests, trim panels in the cockpit and cabin. Don’t use it on floors or anti-slip decks.\u003c\/p\u003e\n\u003ch4\u003eWill the vinyl turn slippery or plasticky?\u003c\/h4\u003e\n\u003cp\u003eNo. The finish is satin-matt and dry to the grip. Always buff off the residue; too much product leads to shiny patches – work thin.\u003c\/p\u003e\n\u003ch4\u003eHow do I prep properly?\u003c\/h4\u003e\n\u003cp\u003eClean with VinylTexClean, let it dry thoroughly. Then lay VinylGuard on thin and buff to satin-matt. Avoid direct sun and hot surfaces.\u003c\/p\u003e\n\u003ch4\u003eCan I protect fabrics with it?\u003c\/h4\u003e\n\u003cp\u003eNo. VinylGuard is for vinyl. Seal fabrics after cleaning with TexLock\/CoverGuard – that keeps the feel right and the care repeatable.\u003c\/p\u003e\n\u003ch4\u003eDoes VinylGuard help against yellowing?\u003c\/h4\u003e\n\u003cp\u003eIt stabilises the fresh look and makes cleaning easier, but it doesn’t replace a brightening step. Treat existing yellowing on its own first; then bring in VinylGuard for upkeep.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300965822799,"sku":"D1-KCX-77108-500ML-01","price":14.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77108-500ML-01_1.png?v=1778249516"},{"product_id":"koch-chemie-the-finisher-marine-rubmarine-kunststoffpflege","title":"THE FINISHER \"RubMarine\" Plastic Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"RubMarine\" — plastic care for satin-matte, grippy boat plastics\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eWhat's RubMarine for? — This marine plastic dressing brings unpainted plastics and rubber on board back to a satin-matte look, cuts down how fast they re-soil and keeps a dry, non-greasy feel – spot-on for consoles, trims, seals and instrument housings once they're clean.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER RubMarine plastic care\u003c\/strong\u003e is the targeted conditioning step for unpainted boat plastics and rubber parts. After a pre-clean with AllWays and a wash with CleanMarine, RubMarine lays down an ultra-thin dressing film that calms textured parts visually, evens out the colour depth and keeps the surface dry to the touch. Spot-on for consoles, Rub Rails, seals, hatch frames and instrument housings – no greasy shine, no smearing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin-matte OEM finish:\u003c\/strong\u003e even colour depth and a calm surface that feels dry – ideal for high-touch zones on board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDay-to-day upside: \u003c\/strong\u003ethe thin dressing film visibly stops salt and harbour grime from clinging and makes ongoing cleaning easier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe to use: \u003c\/strong\u003egoes on thin, flashes off cleanly and suits unpainted plastics and rubber – keep it off the deck and anti-slip areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePlastic care on board – finish, feel \u0026amp; how the material reacts\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic care on board\u003c\/strong\u003e needs a finish that looks fresh but never turns slippery or greasy. RubMarine works as a finely dosed polymer emulsion: it smooths the microtexture of unpainted plastics and rubber, dries to a satin matte and leaves a natural grip. Textured areas (instrument hoods, hatch frames) look more even without that \"smeared-on\" appearance. Because no oily layer stays behind, the surface grabs less dust and harbour haze – the dressing stays practical day-to-day, even with frequent handling.\u003c\/p\u003e\n\u003ch3\u003eUsing it on consoles, seals \u0026amp; trims\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e comes down to three steps: clean thoroughly (AllWays\/CleanMarine), let it dry fully, then lay RubMarine down thin with an applicator or microfibre cloth. Spread it evenly in small sections, let it flash off for 1–2 minutes and buff to a satin matte with a fresh side of the cloth. Pick up any excess on edges and screw feet straight away. Don't leave dressing sitting on gelcoat overhangs, glass or polycarbonate – wipe residue off right away. Floors, steps and anti-slip decks stay off-limits so nothing turns slippery. Work in the shade and keep off hot surfaces.\u003c\/p\u003e\n\u003ch3\u003eRoutine \u0026amp; compatibility – gelcoat, vinyl \u0026amp; care plan\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine \u0026amp; compatibility\u003c\/strong\u003e: RubMarine is the care step for unpainted plastics and rubber. Vinyl upholstery you condition separately with VinylGuard; visible surfaces you clean with SeaYou. Smooth gelcoat and paint areas you protect – kept apart from the RubMarine zones – with BodyGuard for easy hydrophobic upkeep. Depending on use (sun, swimming, harbour life) you refresh RubMarine thin every 4–8 weeks. In between, a damp cloth is often enough, since salt and fingerprints cling less.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"RubMarine\" — plastic care\u003c\/h2\u003e\n\u003ch4\u003eWhere do I use RubMarine?\u003c\/h4\u003e\n\u003cp\u003eOn unpainted boat plastics and rubber parts: consoles, Rub Rails, seals, instrument hoods, hatch frames. Not on the deck, walkways or anti-slip zones.\u003c\/p\u003e\n\u003ch4\u003eDoes the surface turn slippery or greasy?\u003c\/h4\u003e\n\u003cp\u003eNo. The finish is satin-matte and dry to the grip. Lay it on thin, let it flash off briefly and buff it out – the feel stays natural.\u003c\/p\u003e\n\u003ch4\u003eHow do I prep properly?\u003c\/h4\u003e\n\u003cp\u003eLoosen salt and harbour grime with AllWays, wash with CleanMarine and let it dry fully. Then lay RubMarine on thin and buff it clean.\u003c\/p\u003e\n\u003ch4\u003eDifference from VinylGuard?\u003c\/h4\u003e\n\u003cp\u003eRubMarine is for unpainted plastics and rubber. VinylGuard dresses marine vinyl (seat benches\/panels) to a satin matte. The two work together but go on different materials.\u003c\/p\u003e\n\u003ch4\u003eHow often should I re-apply?\u003c\/h4\u003e\n\u003cp\u003eEvery 4–8 weeks depending on how hard it gets used. Refresh high-touch zones (entry points, consoles) sooner; work thin and don't \"build up\" layers.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 1 November 2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56301020610895,"sku":"D1-KCX-77111-500ML-01","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77111-500ML-01_1.png?v=1778249519"},{"product_id":"koch-chemie-the-finisher-marine-coverguard-textilversiegelung","title":"THE FINISHER \"CoverGuard\" textile sealant","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „CoverGuard“ — textile sealant for dry, stain-resistant boat fabrics\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does CoverGuard do on board? — This breathable marine textile sealant makes your cushions, sprayhood, bimini \u0026amp; cover hydrophobic, slows how fast water and dirt soak in, and makes cleaning far easier — invisible to the touch, quick to lay down, and it holds up long-term with regular washing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER CoverGuard textile sealant\u003c\/strong\u003e reliably protects marine fabrics like acrylic\/polyester canvas, nylon, blended weaves and carpet runners against everyday wear: water beads off, dirt grips less, and staining drops right down. The fibre stays breathable and keeps that factory-fresh feel – no greasy film. Best applied after cleaning with VinylTexClean (textile mode) and letting everything dry fully. Ideal for sprayhood, bimini, cover, berth covers, seat cushions and cockpit or cabin runners.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic protective film: \u003c\/strong\u003eliquids bead off and dirt works in more slowly — more time to dab it away, fewer tide-lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible \u0026amp; breathable:\u003c\/strong\u003e the feel and air-flow stay put; no „plastic“ feel, no shiny patches when you keep the coat thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-world tough:\u003c\/strong\u003e it makes follow-up care easier, cuts cleaning time and keeps the clean look stable through the boating day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003etextile sealant\u003c\/strong\u003e on board – water-shedding, fibre bonding \u0026amp; knowing your material\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003etextile sealant\u003c\/strong\u003e like CoverGuard anchors as a fine film into the fibre structure: the hydrophobic groups point outward, so water pulls into droplets instead of wicking in, and that slows how quickly water and dirt get through. Because the film stays ultra-thin, breathability barely changes – the fabric still feels like fabric, not something coated. On the acrylic\/polyester canvas of sprayhoods and biminis especially, this stops the quick „soak-through“ in spray or rain and makes later drying faster and mark-free. On interior fabrics, CoverGuard cuts everyday marks like drink spills or wet-clothing stains without stiffening the hand.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eApplying it to sprayhood, bimini \u0026amp; cushions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e works when the base is dry, clean and cool. After cleaning (VinylTexClean in textile mode), let the fabric dry all the way through. In the shade, mist CoverGuard on evenly in a cross pattern, lift the fibres a touch with a soft brush and go over it once more with a thin pass until you see an even saturation – don't soak it. Give the edges, seams and high-wear zones extra attention. Wipe any overspray off gelcoat or glass straight away; plastic windows stay SeaYou's job. Full hydrophobics land after 12–24 hours of drying; before then, don't stress it or let it get soaked.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDurability, upkeep \u0026amp; a care schedule\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e comes down to sun, salt and how often you wash. Exposed outdoor surfaces (sprayhood\/bimini) naturally want a top-up sooner than cabin fabrics. Check how it beads: once no droplets form, clean again, let it dry and lay a thin coat of CoverGuard back on. A sensible rhythm: outdoor surfaces every few weeks to once a quarter depending on the season, interior fabrics less often. A regular rinse or wash pulls salt out, stops build-up and keeps the look even. CoverGuard adds to – but doesn't replace – proper drying and airing on board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „CoverGuard“ — textile sealant\u003c\/h2\u003e\n\u003ch4\u003eWhich materials is CoverGuard suitable for?\u003c\/h4\u003e\n\u003cp\u003eAcrylic\/polyester canvas (sprayhood, bimini, cover), nylon, blended weaves, carpet runners and seat fabrics. Not for leather, vinyl, non-skid decks or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eDoes CoverGuard change the feel or breathability?\u003c\/h4\u003e\n\u003cp\u003eWith a thin coat the hand stays factory-fresh and the fibre stays breathable. Too much product can make the fabric feel stiffer – so always work in thin layers.\u003c\/p\u003e\n\u003ch4\u003eHow long does the sealant need to dry?\u003c\/h4\u003e\n\u003cp\u003eDepending on temperature, 12–24 hours. Don't stress it or soak it in that window. After that you get the full hydrophobics.\u003c\/p\u003e\n\u003ch4\u003eCan I do the windows or vinyl at the same time?\u003c\/h4\u003e\n\u003cp\u003eNo. Plastic windows go to SeaYou, vinyl gets cleaned with VinylTexClean and cared for with VinylGuard. That keeps look and feel right for each material.\u003c\/p\u003e\n\u003ch4\u003eHow often should I refresh it?\u003c\/h4\u003e\n\u003cp\u003eExposed outdoor fabrics every few weeks to a quarter depending on salt and sun, interior fabrics less often. The bead test is your guide: when beading fades, lay on a thin refresh.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56304325034319,"sku":"D1-KCX-77112-1L-01","price":38.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77112-1L-01_1.png?v=1778249537"}],"url":"https:\/\/detailing1.co.uk\/collections\/the-finisher-bootsbereich-polster.oembed","provider":"Detailing1","version":"1.0","type":"link"}