{"title":"Boot reinigen mit THE FINISHER","description":null,"products":[{"product_id":"koch-chemie-the-finisher-marine-seayou-glasreiniger","title":"THE FINISHER \"SeaYou\" Glass Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"SeaYou\" — Glass Cleaner for a Clear View on Board\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhy SeaYou on the boat? — This marine-focused glass cleaner lifts salt film, spray haze and fingerprints streak-free, runs off in a controlled way and stays kind to real glass, polycarbonate and acrylic windows – for a clear view in the cockpit, on deck and down in the cabin.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER SeaYou Glass Cleaner\u003c\/strong\u003e is the clear answer for marine viewing surfaces: it pulls off salt and spray film, water spots and sunscreen smears fast and streak-free. The mild, balanced formula suits boat windows in glass just as well as polycarbonate\/acrylic (think sprayhood, hardtop and cabin windows) and leaves a calm, low-glare finish. Perfect after an exterior wash with CleanMarine or as a quick step in the harbour – for confident navigation and a clean cockpit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine performance:\u003c\/strong\u003e lifts salt and spray film streak-free, cuts glare and keeps the wiper sweep calm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy on materials:\u003c\/strong\u003e built for real glass, polycarbonate and acrylic; controlled flash-off with no streaks or smeary haze.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple \u0026amp; safe: \u003c\/strong\u003eloosen briefly, wipe off, buff dry – ideal for the cockpit, deck glass and cabin windows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMarine glass cleaner – salt film, spray \u0026amp; sunscreen sorted\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine glass cleaner\u003c\/strong\u003e has to do more than shift everyday dust: salt crystallises, holds moisture and bends light; spray brings organic residue along, sunscreen leaves smeary fingerprints. THE FINISHER SeaYou Glass Cleaner steps in right here: wetting additives spread the actives evenly, loosen the layer in a controlled way and wipe it off with no rainbow film. The surface stays clear, edges stay crisp and reflections look less busy – which matters against the light or on a night run. Because SeaYou flashes off with barely any residue, it works on bigger panes too, without you constantly having to \"chase it with a polish\".\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – cockpit, hardtop \u0026amp; cabin\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e couldn't be simpler: work in the shade, keep off hot surfaces. Spray THE FINISHER SeaYou Glass Cleaner onto a clean, tightly woven microfibre cloth (not straight onto edges or seals), wipe the surface in straight passes and buff dry with a fresh side of the cloth. On stubborn water spots let it dwell briefly; on polycarbonate\/acrylic use minimal pressure and \"straight strokes\" to avoid fine wiper lines. Give the wiper blades a quick clean too – that keeps the sweep calm. After the route wash with CleanMarine, SeaYou is your fast visibility check before casting off; for exterior paint and deck, CleanMarine, BodyGuard \u0026amp; Co. stay in charge.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – glass, polycarbonate, acrylic\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e covers tempered glass, polycarbonate (e.g. Makrolon) and acrylic\/Plexiglas in the cockpit and cabin. THE FINISHER SeaYou Glass Cleaner flashes off clean, with no tacky residue. Avoid over-wetting seals and instruments, work panel by panel and keep your cloths clean – don't let salt and sand ride along. It's not meant as a limescale remover for old, baked-on water spots; shadows like that may need a gentle, material-safe polish. For automotive glass we've got the dedicated ClearView in the line – SeaYou stays the specialist for the boat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"SeaYou\" — Glass Cleaner\u003c\/h2\u003e\n\u003ch4\u003eIs SeaYou suitable for plastic windows?\u003c\/h4\u003e\n\u003cp\u003eYes, for polycarbonate and acrylic on board. Work with a clean cloth, light pressure and straight strokes so you don't get fine wiper lines.\u003c\/p\u003e\n\u003ch4\u003eDoes SeaYou really lift salt haze streak-free?\u003c\/h4\u003e\n\u003cp\u003eYes, the film loosens in a controlled way and flashes off with barely any residue. The key is clean, salt-free cloths and working in the shade.\u003c\/p\u003e\n\u003ch4\u003eCan I spray straight onto the window?\u003c\/h4\u003e\n\u003cp\u003eIn the cockpit, spray onto the cloth instead, to avoid over-wetting edges and instruments. Out on deck in calm air, spraying directly is fine.\u003c\/p\u003e\n\u003ch4\u003eDoes SeaYou help with older water spots?\u003c\/h4\u003e\n\u003cp\u003eLight spots yes. Baked-in limescale rings may need a careful, material-safe polish. Always test on a hidden spot first.\u003c\/p\u003e\n\u003ch4\u003eQuick to use in the harbour too?\u003c\/h4\u003e\n\u003cp\u003eAbsolutely. A few sprays onto the cloth, wipe in passes, buff dry – done. Ideal after casting off or before a night run.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300924272975,"sku":"D1-KCX-77106-500ML-01","price":12.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77106-500ML-01_1.png?v=1778249511"},{"product_id":"koch-chemie-the-finisher-marine-vinyltexclean-vinyl-textilreiniger","title":"THE FINISHER \"VinylTexClean\" Vinyl\/Textile Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner for Cockpit, Bench \u0026amp; Cabin\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat makes VinylTexClean ideal on board? — The vinyl\/textile cleaner pulls salt film, sunscreen and everyday residue off in a controlled way, dries streak-free and keeps the grippy feel of marine vinyl and hard-wearing fabrics. Perfect as the prep step before VinylGuard or TexLock\/CoverGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER VinylTexClean vinyl\/textile cleaner\u003c\/strong\u003e is the on-target cleaner for marine vinyl upholstery, console trim and hard-used fabric areas in cockpit and cabin. The pH-balanced, fine-foaming formula lifts sunscreen, salt and drink residue safely, without drying out the surface or leaving it smeary. The result: clean, grippy material with a factory-fresh look – perfectly set up for the care and protection that follow.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl \u0026amp; fabric handled: \u003c\/strong\u003eCuts through sunscreen and salt film plus everyday stains, dries down calmly and keeps the natural grip of seats and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreak-free \u0026amp; controlled:\u003c\/strong\u003e Fine foam for precise work without over-wetting; ideal on upholstery, trim and carpet zones in cabin and cockpit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong in the system:\u003c\/strong\u003e The perfect base for \u003cem\u003eVinylGuard\u003c\/em\u003e (vinyl care) and \u003cem\u003eTexLock\/CoverGuard\u003c\/em\u003e (fabric protection) – and it makes future cleans noticeably easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVinyl\/textile cleaner – lift salt, lotion \u0026amp; everyday grime safely\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003evinyl\/textile cleaner\u003c\/strong\u003e like THE FINISHER VinylTexClean works with mild surfactants and controlled foam: residue gets bound into micelles while the surface stays cool and grippy. On marine vinyl you lift sunscreen film, sweat and salt haze without a greasy shine; on tough fabrics you pull stains without over-soaking the fibres. The product flashes off residue-free so the care and protection products that follow can grab evenly – for a calm, clean cockpit look.\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – dose, dwell, wipe clean\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e: Work in the shade with the surfaces cool. Put the product on a microfibre cloth, or for heavier soiling spray it sparingly onto the area, let it dwell briefly and work it with a soft brush or cloth. Wipe off straight away with a clean side of the cloth, go over it with a slightly damp fibre if needed and pull it dry. Avoid over-wetting so you don't get streaks. Plastic windows (polycarbonate\/acrylic) belong to „SeaYou“ – don't clean those with this.\u003c\/p\u003e\n\u003ch3\u003eFinish \u0026amp; system – prepping for care and protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinish \u0026amp; system\u003c\/strong\u003e: After cleaning, the surface stays grippy-clean, not greasy. Then condition the vinyl areas in the cockpit with „VinylGuard“ for a rich, non-smeary look. Lock down heavily used fabric zones (seat surfaces, carpet runners, berth entry and exit) with „TexLock“ or „CoverGuard“ once fully dry. That cuts down re-soiling, and future washes go noticeably faster.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use VinylTexClean on?\u003c\/h4\u003e\n\u003cp\u003eOn marine vinyl upholstery, console and cabin trim, and hard-wearing fabrics. Keep it off leather, delicate Alcantara areas and plastic windows.\u003c\/p\u003e\n\u003ch4\u003eHow do I avoid water or dirt rings?\u003c\/h4\u003e\n\u003cp\u003eDose sparingly, let it dwell briefly, wipe off with a fresh side of the cloth and go over it dry. Don't work in the sun and don't let it dry on.\u003c\/p\u003e\n\u003ch4\u003eDoes the cleaner change the feel?\u003c\/h4\u003e\n\u003cp\u003eNo, it leaves a grippy-clean surface with no smeary film. For a visual refresh and protection afterwards, use „VinylGuard“ or „TexLock\/CoverGuard“.\u003c\/p\u003e\n\u003ch4\u003eDoes it help against salt haze?\u003c\/h4\u003e\n\u003cp\u003eYes. Salt and spray film are lifted safely and wiped off streak-free – provided you use clean cloths and work in the shade.\u003c\/p\u003e\n\u003ch4\u003eCan I use it off the boat too?\u003c\/h4\u003e\n\u003cp\u003eYes, on comparable vinyl\/textile surfaces with marine-grade toughness. For automotive interiors, reach for „InsideUp“ or „LeatherTexClean“ depending on the material.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300945473871,"sku":"D1-KCX-77107-500ML-01","price":13.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77107-500ML-01_1.png?v=1778249513"},{"product_id":"koch-chemie-the-finisher-marine-allways-allesreiniger","title":"THE FINISHER \"AllWays\" All-Purpose Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „AllWays“ — all-purpose cleaner for marine pre-cleaning \u0026amp; deck care\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhere do I use AllWays on board? — This marine all-purpose cleaner lifts salt film, grease, spray and harbour grime in a controlled way, wets evenly, rinses off without residue and gets gelcoat, non-skid decks, fender zones and lockers safely ready for the next step.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER AllWays all-purpose cleaner\u003c\/strong\u003e is your do-it-all pre-cleaning step for boats: it softens salt and harbour grime, oily film and rubber marks, creeps into edges and profiles and rinses clean – with no smeary residue. On gelcoat, non-skid decks, painted consoles, rubber trims and hard-wearing lockers it gets the surface ready to go fast, before CleanMarine (shampoo), SeaYou (glass) and BodyGuard (spray protection) take over. That keeps the care chain on board cleanly separated, repeatable and forgiving.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine pre-cleaning:\u003c\/strong\u003e softens salt and spray film, oily harbour haze and rubber marks (fenders\/lines) in a controlled way, so the main wash runs easier and with fewer scratches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck- \u0026amp; gelcoat-friendly:\u003c\/strong\u003e a stable film with good creep on non-skid and smooth gelcoat; it rinses off thoroughly and leaves an even base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-clean on board:\u003c\/strong\u003e the perfect bridge to CleanMarine (contact wash), SeaYou (visible surfaces) and BodyGuard (hydrophobic finish); vinyl\/textile stay with VinylTexClean and CoverGuard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMarine pre-cleaning – salt, harbour haze \u0026amp; rubber marks\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine pre-cleaning\u003c\/strong\u003e means chemically breaking the typical mix of salt, spray, diesel\/oil mist and rubber marks apart first. THE FINISHER AllWays all-purpose cleaner builds an even film for that, one that clings well in profile edges, around fittings and along the waterline without running off quickly. Salt and organic residue get bound into micelles and reliably carried off when you rinse; rubber marks from fenders and lines fade visibly after a short dwell and a light brush. Because the cleaner flashes off cleanly, the next wash starts without smearing, and BodyGuard can grab evenly later on. On sensitive metals or old, porous seals you work with short dwell times and a small test patch, so the look and feel stay calm.\u003c\/p\u003e\n\u003ch3\u003eDeck \u0026amp; gelcoat – clean non-skid safely, ease the waterline\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDeck \u0026amp; gelcoat\u003c\/strong\u003e call for control rather than force. On non-skid zones the fine-foaming film carries dirt out of the texture without smoothing the surface; a soft deck brush backs up the mechanics, then you rinse over a wide area. On smooth gelcoat, the hardtop and around the waterline the cleaner lifts harbour haze, splashes and light soot rings in a controlled way; worked in a cross pattern with pad\/brush, no patchy zones form. Fender kisses and black scuffs you treat section by section, working quickly in the shade and rinsing fully. SeaYou stays in charge of clear windows, since AllWays can create needless rework on plastic panes; for visible yellowing before the finish a separate, material-safe brightening routine helps, before BodyGuard delivers the hydrophobic, easy-care finish.\u003c\/p\u003e\n\u003ch3\u003eApplication \u0026amp; safety – dosing, dwell time, compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u0026amp; safety\u003c\/strong\u003e follow a simple logic: cool surface, shade, pre-wet. Spray THE FINISHER AllWays all-purpose cleaner on section by section, let it work for 2–3 minutes, move it with a brush if needed and then rinse generously with fresh water. Don't let it dry – wind, sun and hot surfaces cut the dwell times short. In lockers, on painted consoles and rubber trims the cleaner works reliably; bare, sensitive metals and anodised parts you test briefly and keep the dwell time short. Clean vinyl upholstery and textile parts separately with VinylTexClean; once fully dry, CoverGuard protects heavily used textile zones. Windows and instrument covers stay with SeaYou so no streaks form. Run the contact wash with CleanMarine and top with BodyGuard if needed – that keeps the care on board plannable and repeatable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „AllWays“ — all-purpose cleaner\u003c\/h2\u003e\n\u003ch4\u003eWhich marine surfaces do I use AllWays on?\u003c\/h4\u003e\n\u003cp\u003eOn gelcoat, non-skid decks, painted consoles, rubber trims and hard-wearing lockers. Clean vinyl upholstery, textiles and windows separately (VinylTexClean\/CoverGuard and SeaYou).\u003c\/p\u003e\n\u003ch4\u003eHow do I stop stains on non-skid?\u003c\/h4\u003e\n\u003cp\u003eWork in the shade, dose sparingly, dwell briefly, move with a soft brush and rinse fully. Don't let it dry; wash out any leftover dirt with CleanMarine.\u003c\/p\u003e\n\u003ch4\u003eDoes AllWays help against fender marks?\u003c\/h4\u003e\n\u003cp\u003eYes, rubber marks fade clearly after a short dwell and light mechanics. Stubborn old marks may need a second, short pass.\u003c\/p\u003e\n\u003ch4\u003eIs the cleaner suitable for plastic windows?\u003c\/h4\u003e\n\u003cp\u003eNo, SeaYou is meant for that. AllWays can create rework on polycarbonate\/acrylic; always treat visible surfaces separately.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in the engine bay?\u003c\/h4\u003e\n\u003cp\u003eFor light-duty, yes: keep it cool, protect electrically sensitive areas, spray on target, move with a brush and rinse moderately. Remove residue fully.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300987318607,"sku":"D1-KCX-77109-500ML-01","price":9.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77109-500ML-01_1.png?v=1778249518"},{"product_id":"koch-chemie-the-finisher-marine-cleanmarine-bootsshampoo","title":"THE FINISHER \"CleanMarine\" Boat Shampoo","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"CleanMarine\" — boat shampoo for salt-free, slick surfaces\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does CleanMarine do on board? — This pH-balanced boat shampoo lifts salt and harbour film safely, builds a slick wash film, rinses clean and keeps your existing protection intact. For gelcoat, painted surfaces and smooth plastics – fast, controlled, barely a streak.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER CleanMarine boat shampoo\u003c\/strong\u003e is the no-fuss main wash for smooth gelcoat and high-gloss painted surfaces. The surfactant base wraps up salt, spray and organic residue while slip additives cut friction right through the contact pass. So you wash safer, rinse clean and keep your existing wax or spray sealant. Ideal after a quick pre-clean (AllWays) and before a hydrophobic finish with BodyGuard – for a surface that visibly stays fresh longer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSalt \u0026amp; spray handled: \u003c\/strong\u003eWraps up residue and rinses it away clean – fewer water spots, a calmer finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerious slip:\u003c\/strong\u003e Cuts friction while you brush or wash and helps you dodge micro-marring – especially on dark, smooth panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLSP-friendly:\u003c\/strong\u003e Keeps your wax and spray protection instead of stripping it; the perfect base for BodyGuard as a season topper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBoat shampoo – salt film, foam stability \u0026amp; slip additives\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003eboat shampoo\u003c\/strong\u003e like CleanMarine pairs an efficient but material-friendly surfactant formula with controlled foam. Salt crystals and harbour film get locked into micelles, so you rinse them off without leaving a haze. The wash film stays slick for ages, pulls dirt out of pores and edges and lets your wash mitt or soft deck brush glide safely. Because the formula is pH-balanced, the gloss and hydrophobics of any existing wax or spray layer stay put – the result reads calm, clean and genuinely smooth to the touch.\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – pre-wet, wash, rinse\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e starts in the shade on cool surfaces. Pre-wet with fresh water first, until salt and loose grit run off. Dose CleanMarine as directed, foam it up in the bucket and work top-to-bottom in sections. Move a soft brush crossways over non-skid zones, and take smooth gelcoat or painted areas with the wash mitt in long strokes, no pressure. Don't let the shampoo flash off, rinse generously and either towel down with a clean cloth or let it sheet off. Finish the show surfaces with SeaYou afterwards; clean and treat vinyl\/textile separately.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; care plan – gelcoat, non-skid, layered protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e covers smooth gelcoat, high-gloss marine-painted panels and smooth plastics. Non-skid gets cleaned safely without smoothing out its grip. Test matte or rough specialist surfaces first and work them without pressure. For the season logic: pre-clean (AllWays) → CleanMarine as the main wash → optionally PerfectOne\/WaxPolish for visual depth → BodyGuard as a hydrophobic, quick-to-refresh finish. That way the surface stays cleaner longer, rinsing gets easier and the routine stays repeatable – even under strong sun and heavy salt.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"CleanMarine\" — boat shampoo\u003c\/h2\u003e\n\u003ch4\u003eDoes CleanMarine attack existing wax?\u003c\/h4\u003e\n\u003cp\u003eNo. The pH-balanced formula is LSP-friendly and keeps your wax and spray protection. You can top up the beading after the wash with BodyGuard.\u003c\/p\u003e\n\u003ch4\u003eIs it safe on non-skid?\u003c\/h4\u003e\n\u003cp\u003eYes. Work a soft brush crossways and rinse thoroughly. The shampoo cleans without touching the grip underfoot.\u003c\/p\u003e\n\u003ch4\u003eHow do I avoid water spots?\u003c\/h4\u003e\n\u003cp\u003eWash cool in the shade, don't let it flash off, rinse generously and towel down with a clean cloth if needed. Always clear the salt first with fresh water.\u003c\/p\u003e\n\u003ch4\u003eCan I clean plastic windows with it?\u003c\/h4\u003e\n\u003cp\u003eFor polycarbonate\/acrylic, reach for SeaYou instead. CleanMarine is the main shampoo for hull and deck, not the window specialist.\u003c\/p\u003e\n\u003ch4\u003eHow often should I wash?\u003c\/h4\u003e\n\u003cp\u003eAs needed: after any spray-heavy trip, or weekly through the season. A quick fresh-water rinse between washes keeps buildup down.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56301200638287,"sku":"D1-KCX-77105-1L-01","price":20.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77105-1L-01_1.png?v=1778249530"},{"product_id":"koch-chemie-the-finisher-marine-hellowhite-antigilb","title":"THE FINISHER \"HelloWhite\" AntiGilb","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „HelloWhite“ — AntiGilb for clean waterlines \u0026amp; fresh whites\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eHow does HelloWhite work? — The AntiGilb chemically loosens waterline yellowing and light rust\/harbour film, brings the white back to gelcoat and glossy painted surfaces, rinses off neutral, and works as a targeted intermediate step before you protect with WaxPolish or BodyGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER HelloWhite AntiGilb\u003c\/strong\u003e is your targeted stain remover against gelcoat yellowing at the waterline, bow, transom and around fittings. The active, controlled-flash formula softens organic „Tea-Stains“ and light metal\/harbour film so you can rinse them off without harsh mechanics. After treatment the surface looks visibly fresher and makes the ideal base for a wax- or spray-based finish. In the system, \u003cstrong\u003eTHE FINISHER HelloWhite AntiGilb\u003c\/strong\u003e sits between the main wash (CleanMarine) and protection (WaxPolish\/BodyGuard) – right where gelcoat shows those yellowed shadows.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted de-yellowing:\u003c\/strong\u003e loosens waterline yellowing and light rust\/harbour film in a controlled way – no sanding marathons and no grey afterimage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean handling:\u003c\/strong\u003e wets evenly, works in fast, rinses off neutral; ideal for spot areas instead of „all or nothing“.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine system fit:\u003c\/strong\u003e use after CleanMarine, then lock it in with WaxPolish (deep gloss) or BodyGuard (hydrophobicity).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAntiGilb – cause, how it works \u0026amp; reading the material\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAntiGilb\u003c\/strong\u003e tackles the typical gelcoat yellowing („Tea-Stains“) that comes from salts, organic residue and light metal traces. THE FINISHER HelloWhite AntiGilb carries in active ingredients with strong wetting, chemically loosens the discolouring layer and makes it lift off with water. Because the formula flashes off in a controlled way, you work fast, on target, and without dried-on edges. It suits smooth gelcoat and high-gloss marine-painted panels; keep it off Non-Skid, vinyl, teak and polycarbonate\/acrylic windows so each material keeps the right feel and look.\u003c\/p\u003e\n\u003ch3\u003eOn-board use – waterline, fittings \u0026amp; transom\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse\u003c\/strong\u003e starts with a clean base: wash the boat in the shade with CleanMarine and rinse with fresh water. Spray HelloWhite onto the wet surface section by section from bottom to top, or apply with a pad, let it dwell 1–3 minutes (don't let it dry), agitate lightly with a soft pad\/brush if needed, then rinse generously with fresh water. Around metal fittings, drain edges and trailer bunks work quickly and take off any excess straight away. After that a short re-wash\/rinse is worth it so the pH is back to neutral – now the surface is ready for WaxPolish or BodyGuard.\u003c\/p\u003e\n\u003ch3\u003eResult, limits \u0026amp; building protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eResult\u003c\/strong\u003e is a visibly brightened, even white\/light surface with no yellow shadows – ideal „before protection“. Limits: deep oxidation, hard deposits and older, dark-brown waterlines need polishing first (PerfectOne) or local sanding by pros. After HelloWhite, saturate the look with WaxPolish or lock it in hydrophobic with BodyGuard; regular washes with CleanMarine stop it building back up fast. For vinyl upholstery, VinylTexClean\/VinylGuard stays in charge, windows are SeaYou's job – that keeps the care plan cleanly split and repeatable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „HelloWhite“ — AntiGilb\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use HelloWhite on?\u003c\/h4\u003e\n\u003cp\u003eOn smooth gelcoat and glossy marine-painted panels at the waterline, bow, transom. Don't use it on Non-Skid, teak, vinyl or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eHow long should it dwell?\u003c\/h4\u003e\n\u003cp\u003e1–3 minutes in the shade. Don't let the product dry; in the heat work shorter and re-mist if needed. Always rinse generously with fresh water afterwards.\u003c\/p\u003e\n\u003ch4\u003eDo I have to neutralise?\u003c\/h4\u003e\n\u003cp\u003eA thorough rinse and a short re-wash with CleanMarine are enough. Rinse cloths\/pads out with fresh water afterwards.\u003c\/p\u003e\n\u003ch4\u003eDoes HelloWhite remove rust spots too?\u003c\/h4\u003e\n\u003cp\u003eLight rust shadows, yes. Deep pitting or rust speckle need a careful polish (e.g. PerfectOne) or specialised treatment depending on the material.\u003c\/p\u003e\n\u003ch4\u003eWhat's the right order?\u003c\/h4\u003e\n\u003cp\u003eWash with CleanMarine → spot-de-yellow with HelloWhite → rinse\/re-wash → WaxPolish (deep gloss) or BodyGuard (hydrophobicity). Treat windows\/vinyl separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56304256221519,"sku":"D1-KCX-77110-1L-01","price":40.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77110-1L-01_1.png?v=1778249534"}],"url":"https:\/\/detailing1.co.uk\/collections\/the-finisher-boot-reinigen.oembed","provider":"Detailing1","version":"1.0","type":"link"}