{"title":"Bucket lid","description":"\u003ch2 id=\"speakable-headline\"\u003eBucket lids cover your wash bucket or turn it into a seat\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat does a bucket lid do when you wash your car? It keeps dust and leaves out of the mixed wash solution, closes the wash bucket as a box for dry kit, or turns it into a stool. Every lid only fits its own bucket system, and covering a bucket doesn't make it spill-proof.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eBucket lids\u003c\/strong\u003e are the lids for the wash buckets you use for hand-washing a car. They snap on all the way round the bucket rim or hook onto it, and depending on the design they turn the open bucket into a cover, a storage box or a seat. What matters isn't the diameter alone but the bucket system: Koch-Chemie, Meguiar's and YETI each match the rim bead, locking lugs and shape to their own bucket.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne lid belongs to exactly one bucket.\u003c\/strong\u003e The Koch-Chemie click lid is matched to the 20-litre Detailing Bucket, the Meguiar's Snap On lid to the Meguiar's 5-US-gallon bucket range, about 19 litres. The YETI lids only fit the 19-litre LoadOut bucket.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe lid keeps the wash solution clean.\u003c\/strong\u003e If you mix up 20 litres of wash solution and take a break between two sections, the lid keeps dust, leaves and bugs out of the water. After the wash, the same bucket becomes a closed container for dry mitts, brushes and towels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA seat lid brings you down to wheel height.\u003c\/strong\u003e YETI's padded seat lid swivels through 360 degrees and turns the LoadOut bucket into a stool. You work on wheels, sills and wheel arches sitting down instead of crouching, with the bucket right next to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Before you order, pin down the maker and range of your bucket, not just the litres. The Meguiars Large Bucket and YETI's LoadOut bucket both hold 19 litres, yet neither lid is listed for the other bucket. If you're buying the bucket new, grab the lid from the same range at the same time. And only close it once the bucket and kit are dry; more on that under \u003ca href=\"\/collections\/wascheimer\"\u003eWash buckets\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eA bucket lid only fits the bucket it was built for\u003c\/h3\u003e\n\n\u003cp\u003eA bucket lid only closes the bucket it was moulded for, because diameter, rim bead and locking lugs differ from one maker to the next.\u003c\/p\u003e\n\n\u003cp\u003eThat exact question reached us in the chat on the YETI bucket's product page: is there a matching lid sold separately? The honest answer always starts with the bucket. If you know which model is standing in your garage, you'll find the lid in seconds. If you only know the litres, you may well end up looking in the wrong place, because two buckets of almost the same volume can have very different rims.\u003c\/p\u003e\n\n\u003cp\u003eThe product details say so too. Koch-Chemie lists its click lid as the lid for its own Detailing Bucket. The product description for the Meguiar's Snap On lid calls it a precise fit for the Meguiar's bucket range and names the limit in the same breath: on other makers' buckets the fit may differ, because diameter and bead shape vary. YETI lists the lid and seat lid explicitly for the LoadOut bucket.\u003c\/p\u003e\n\n\u003cp\u003eYETI's own range shows how tight that link is. For another bucket from the same brand, YETI states on its German website that its lid isn't compatible with the LoadOut bucket. So not everything is interchangeable even within one brand, let alone between Koch-Chemie, Meguiar's and YETI.\u003c\/p\u003e\n\n\u003cp\u003eThat gives you the order to buy in: choose the bucket first, then add the matching lid. The wash buckets themselves, their volume and the two-bucket method are under \u003ca href=\"\/collections\/wascheimer\"\u003eWash buckets\u003c\/a\u003e. For the overview of everything that goes on and in the bucket, see \u003ca href=\"\/collections\/wascheimer-zubehoer\"\u003eWash buckets \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eIf you don't have a bucket at all yet, a set gets around the fit question. In the \u003ca href=\"\/products\/koch-chemie-detailing-bucket-set-wascheimer-deckel-schmutzsieb-set\"\u003eKoch-Chemie Detailing Bucket Set (Wascheimer, Deckel und Schmutzsieb)\u003c\/a\u003e, the bucket, click lid and grit guard come from one source and are made to work together. If you add a second bucket later, take the same model; then the lid and grit guard fit that one too, should you want to add them.\u003c\/p\u003e\n\n\u003ch3\u003eClick lid, clear lid and seat lid do different jobs\u003c\/h3\u003e\n\n\u003cp\u003eThe range covers three types of bucket lid: the click lid for covering, the clear lid that lets you see the contents, and the seat lid that turns the bucket into a stool.\u003c\/p\u003e\n\n\u003cp\u003eThe click lid is the simplest type. You press it on and it snaps into place all the way round the bucket rim; Meguiar's calls the same design Snap On. There's no more mechanism to it than that, and that's exactly why everything depends on the fit with the bucket rim.\u003c\/p\u003e\n\n\u003cp\u003eThe lid for YETI's LoadOut bucket is clear. So you can see what's in the bucket without opening it, and the top is stiffened with a honeycomb structure. YETI calls it weather-resistant, so the contents stay dry on the go. For you, that means it's first and foremost a lid for a kit box that can stand outside.\u003c\/p\u003e\n\n\u003cp\u003eThe seat lid is the third type, and it has nothing to do with the water any more. YETI's Swivel Seat has a padded foam seat, turns quietly on its own axis and hooks onto the LoadOut bucket. It's an ergonomic piece for working close to the ground, not a closure for wash water.\u003c\/p\u003e\n\n\u003cp\u003eYou may know a fourth type from specialist retailers: the screw-on lid on a ring that's pressed onto the bucket rim. We don't stock it, and the \u003ca href=\"\/collections\/wascheimer\"\u003eWash buckets\u003c\/a\u003e page already covers it. According to retailers, the ring often only comes off again with force, so in practice it stays on the bucket permanently. Only one consequence of that matters for these accessories: the ring narrows the opening and can clash with \u003ca href=\"\/collections\/eimereinsaetze\"\u003ebucket inserts\u003c\/a\u003e that sit at an angle.\u003c\/p\u003e\n\n\u003ch3\u003eA lid covers the bucket, it doesn't seal it\u003c\/h3\u003e\n\n\u003cp\u003eA bucket lid keeps dust, leaves and bugs out from the outside, but if the full bucket tips over, it will spill despite the lid.\u003c\/p\u003e\n\n\u003cp\u003eThe warning in the Detailing Bucket's product data sheet is clear: the lid isn't designed to stop spills. The click lid is built for dust, leaves and storage. If you treat it as a seal for 20 litres of wash solution in the car, you're confusing covering with sealing, and you'll find out the difference with your first wet boot at the latest.\u003c\/p\u003e\n\n\u003cp\u003eRetailers also describe the screw-on lid on a ring as splash-proof, but not every supplier guarantees it's fully watertight. YETI's manufacturer claim is weather-resistant, referring to dry supplies inside the bucket. We haven't found a manufacturer claim for any lid in our range that a filled bucket stays sealed if it tips over, so we're not making that claim either.\u003c\/p\u003e\n\n\u003cp\u003eThat shifts the choice from \"how tight\" to \"what for\". Any lid that fits will keep dust off mixed solution between two sections. Same for storing dry kit, with the clear YETI lid showing you the contents. You can only sit safely on the lid that's built for it.\u003c\/p\u003e\n\n\u003cp\u003eSo the lid stays a tool for before and after the wash. During the wash itself, it sits to one side, because the mitt needs to go in and out of the bucket freely. Accept that, and you buy the lid for the right job and don't get any surprises on wash day.\u003c\/p\u003e\n\n\u003ch3\u003eA full bucket only travels to the wash bay upright\u003c\/h3\u003e\n\n\u003cp\u003eIf you drive to the wash bay with a full wash bucket, secure it upright against sliding and tipping, because what holds it in place in the car is proper load securing, not the lid.\u003c\/p\u003e\n\n\u003cp\u003eOn car care forums, the boot is a topic of its own; a thread from 2011 collects people's experiences. Full buckets slide around while you drive, and 20 litres of wash solution weigh about 20 kilograms. The solutions people came up with are down-to-earth: a ratchet strap or luggage net, Velcro on the floor, a folding crate alongside, or the footwell behind the front seat, where the bucket can't wander. The lid is the last piece of the puzzle, not the first.\u003c\/p\u003e\n\n\u003cp\u003eIt gets easier if there's water available where you're going. Then the bucket travels empty, with the lid on and kit stowed inside, and only gets filled once you're there. That saves weight when you carry it and takes the risk out of the journey. Until then, the wash chemicals stay in their own bottles, where they're safely closed.\u003c\/p\u003e\n\n\u003cp\u003eIf you're heading to a self-service wash bay, check the site rules first. Whether you're allowed to wash there with your own bucket and mitt is up to the operator, and some don't allow it. The waschbox-radar portal lists over 210 locations where bucket washing is allowed, though it doesn't claim to be complete. Your bucket lid doesn't change that rule; it just makes sure the bucket and kit arrive clean.\u003c\/p\u003e\n\n\u003cp\u003eThat leaves the question of whether the lid still closes with accessories inside the bucket. For the \u003ca href=\"\/products\/yeti-loadout-bucket-caddy-einsatz-loadout-eimer\"\u003eYETI Bucket Caddy\u003c\/a\u003e, the product details state compatibility with the separately available lid. Koch-Chemie lists the bucket, lid and grit guard as one system that fits together. For other combinations, go by the manufacturer's information, not by assumption.\u003c\/p\u003e\n\n\u003ch3\u003eEvery bucket system in our range has its own lid\u003c\/h3\u003e\n\n\u003cp\u003eOur bucket lids are split across the bucket systems from Koch-Chemie, Meguiar's and YETI, and you pick each lid by its bucket, not by its price.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/products\/koch-chemie-detailing-bucket-lid-wascheimer-klickdeckel\"\u003eKoch-Chemie Detailing Bucket Lid\u003c\/a\u003e is the click lid for the \u003ca href=\"\/products\/koch-chemie-detailing-bucket-wascheimer-20l\"\u003eKoch-Chemie Detailing Bucket Wascheimer 20L\u003c\/a\u003e. According to the product details, it's made from the same plastic as the bucket and is UV-resistant. It's the plainest solution if you need dust protection and a lidded bucket in the Koch-Chemie system.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/products\/meguiars-snap-on-bucket-lid\"\u003eMeguiars Snap On Bucket Lid\u003c\/a\u003e closes Meguiar's buckets, in our shop for example the 19-litre \u003ca href=\"\/products\/meguiars-large-bucket\"\u003eMeguiars Large Bucket Wascheimer\u003c\/a\u003e. The product details describe it as a precise fit for the Meguiar's range and warn themselves about a different fit on other makers' buckets. If you already work with Meguiar's buckets, it rounds out your existing system instead of starting a second one.\u003c\/p\u003e\n\n\u003cp\u003eFor the LoadOut bucket, there are two lids. The \u003ca href=\"\/products\/yeti-loadout-bucket-lid-deckel-loadout-eimer\"\u003eYETI Bucket Lid\u003c\/a\u003e is the clear, weather-resistant lid, and the \u003ca href=\"\/products\/yeti-loadout-swivel-seat-sitzdeckel-loadout-eimer\"\u003eYETI Bucket Swivel Seat\u003c\/a\u003e is the padded seat lid that swivels. Both are the pricier options, and the extra cost pays for seeing the contents, weather protection and seating comfort, not for a better seal.\u003c\/p\u003e\n\n\u003cp\u003eOne figure we're deliberately not quoting: the load capacity. For the YETI lid, different values do the rounds depending on the source, the German manufacturer page doesn't give one, and no manufacturer gives a figure for the click lids. So sitting is the seat lid's job. You'll find the whole YETI kit of lid, seat, caddy and utility belt under \u003ca href=\"\/collections\/yeti-bucket-zubehoer\"\u003eYETI Bucket accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eClick lid or seat lid: your bucket decides\u003c\/h3\u003e\n\n\u003cp\u003eThe choice comes down to two questions: which bucket do you have, and should the lid cover, store or take your weight when you sit on it?\u003c\/p\u003e\n\n\u003cp\u003eIf you want dust protection and a lidded bucket, take the click lid for your system. If you often work on wheels, sills and wheel arches sitting down and use the LoadOut bucket, the seat lid is worth it. If you store your kit in the bucket and want to see the contents, the clear YETI lid is the one. The outside pouch for brushes and spray bottles is one page over under \u003ca href=\"\/collections\/eimertaschen\"\u003eBucket bags\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eA lid doesn't replace securing the bucket in the car or drying your kit; both are covered further up. For your choice, that means: buy it for what it can do, which is keep dust out, close up your kit, or take your weight if it's the seat lid. If you expect a lid to be watertight, you're looking at the wrong accessory.\u003c\/p\u003e\n\n\u003cp\u003eFor the rinse bucket in a two-bucket wash, a bucket with a grit guard and no lid is often enough, as the wash bucket page recommends too. Our guide \u003ca href=\"\/blogs\/detailing101\/die-zwei-eimer-methode-warum-ein-eimer-deinen-lack-kostet\"\u003eDie Zwei-Eimer-Methode\u003c\/a\u003e explains how the method itself works. The lid then becomes interesting for the bucket that holds your kit between wash days.\u003c\/p\u003e\n\n\u003cp\u003eAnd sometimes you don't need a lid at all. If you wash at home right by the tap, carry the bucket only a few metres and store it empty and dry in the garage, you won't miss anything without a lid. The lid pays off as soon as the bucket rides along in the car, stands outside or serves as a kit box between wash days.\u003c\/p\u003e\n\n\u003cp\u003eIn the end, with a lid it's not the accessory that decides how useful it is, but the fit. A lid from your bucket's system sits the way its maker intended; one from another system can pop off if the fit is different. If you buy bucket, insert and lid from one range, what you're mainly buying is a precise fit, and covering stays what it is: protection from the outside, not a seal.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-detailing-bucket-lid-wascheimer-klickdeckel","title":"Detailing Bucket Lid — Click-On Lid for Your Wash Bucket","description":"\u003ch2\u003eSeal your wash bucket and keep the dust out — with the Koch-Chemie Detailing Bucket Lid click-on lid\u003c\/h2\u003e\n\n\u003cblockquote\u003e\u003cem\u003eThe Koch-Chemie Detailing Bucket Lid is a snug click-on lid for the Detailing Bucket 20L — it keeps dust and dirt out of your wash water, stops spills when you carry the bucket, and turns the wash bucket into a clean storage box for your wash gear.\u003c\/em\u003e\u003c\/blockquote\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClick closure — stays put\u003c\/strong\u003e — snaps firmly onto the bucket, so it won't pop open while you carry or move it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade to fit the Koch-Chemie Detailing Bucket 20L\u003c\/strong\u003e — matched to the Detailing Bucket system, sits solid with no gaps.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtects wash water and gear\u003c\/strong\u003e — dust, leaves and bugs stay out, so your mixed shampoo water stays usable longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy a click-on lid belongs on a pro wash bucket\u003c\/h3\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-detailing-bucket-wascheimer-20l\"\u003eDetailing Bucket\u003c\/a\u003e without a lid is like a toolbox without a lid: it works, but you're not getting the most out of it. The click-on lid does three things. First, it keeps your mixed wash water clean between two jobs — no dust, bird mess or falling leaves. Anyone working in a yard or a unit knows the problem: ten minutes with the bucket open and it's full of sawdust or grit. Second, it makes the bucket easy to move: no splashing when you carry it or load it into the boot. Third, the sealed bucket doubles as a dust-tight storage box for your wash mitts, microfibre cloths and small bits — handy for mobile detailers who want to keep their kit compact.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use it and pair it with the full Bucket system\u003c\/h3\u003e\n\u003cp\u003eOnce the bucket's filled, just press the lid on and it clicks firmly into place. To open, lift it at the side. The lid isn't built as a leak-proof seal — meaning if a full bucket tips over, it won't hold the water back. For the full Koch-Chemie Detailing Bucket system, pair the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-detailing-bucket-wascheimer-20l\"\u003eDetailing Bucket 20L\u003c\/a\u003e, the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-detailing-bucket-grit-guard-wascheimer-schmutzsieb\"\u003eGrit Guard\u003c\/a\u003e and this click-on lid — all three also come together as the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-detailing-bucket-set-wascheimer-deckel-schmutzsieb-set\"\u003eDetailing Bucket Set\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial and durability\u003c\/h3\u003e\n\u003cp\u003eThe click-on lid is made from the same tough plastic as the Detailing Bucket itself. It's UV-resistant and won't warp when you stand the bucket on its edge. The click mechanism is built for plenty of open-and-close cycles — the tabs won't snap under normal use. Cleaning: just rinse it off with the bucket.\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e When you're detailing on the move, clip the lid onto the filled bucket and stand it upright in the boot — that's more stable than laying it down and stops the lid giving way under the weight of the water. If you want to reuse your shampoo water after the wash, just pop the lid on and open it up the next day — the water stays clean.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eDetailing Bucket Lid vs. a DIY fix — why the original lid fits better\u003c\/h3\u003e\n\u003cp\u003eSome detailers get by with a makeshift cover from cling film or a random bucket lid. The catch: fit is everything. A lid that doesn't sit exactly on the bucket pops open on the first trip, or sits so loose that dust gets in anyway. The Koch-Chemie Detailing Bucket Lid is matched to the Detailing Bucket 20L — it clicks in with just the right resistance, no force needed, and won't open on its own.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Koch-Chemie Detailing Bucket Lid right for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone already running the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-detailing-bucket-wascheimer-20l\"\u003eDetailing Bucket 20L\u003c\/a\u003e who wants to get the most out of it. Especially worth it for mobile detailers who carry buckets around, and for anyone who wants to keep their wash water between jobs. As a single part for under 6 euros, the lid is the cheapest add-on in the Bucket system.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n  \u003ch2\u003eFrequently asked questions about the Detailing Bucket Lid click-on lid\u003c\/h2\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat's the click-on lid for the wash bucket actually for?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe click-on lid keeps dust, leaves and dirt out of your wash water, makes the bucket easy to carry, and lets you store your wash gear cleanly inside the bucket. It's a must for mobile detailers and anyone who wants to keep their wash bucket clean between jobs.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eDoes the click-on lid fit the Koch-Chemie Detailing Bucket 20L?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eYes — the lid is made to fit the Koch-Chemie Detailing Bucket 20L. It clicks firmly into place and sits with no gaps. We can't guarantee it fits other buckets.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eDoes the click-on lid stay watertight while you carry it?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe click-on lid stops splashing during normal carrying and keeps dust and dirt out. But it's not a leak-proof seal — if a full bucket tips over, it won't hold the water back. For transport, stand the bucket in a stable spot in the boot.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eCan you use the wash bucket with the lid as a storage box?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eYes — closed with the click-on lid, the Detailing Bucket becomes a dust-tight storage box for your wash mitts, microfibre cloths and small bits. Ideal for mobile detailers who want to carry their kit compact and clean.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eIs the click-on lid available on its own or only as a set?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe Detailing Bucket Lid is available as a single part — ideal for anyone who already owns the bucket and wants to add the lid later. It's also part of the Detailing Bucket Set, which bundles the bucket, Grit Guard and lid together.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"Default Title","offer_id":48818490081615,"sku":"D1-KCX-9998226","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998226_1_aab25128-b4bf-4447-a0f9-5db36151e633.png?v=1778249418"},{"product_id":"yeti-loadout-bucket-lid-deckel-loadout-eimer","title":"Bucket Lid \/ Lid for the \"LoadOut® Bucket\"","description":"\u003ch2\u003eThe YETI LoadOut® Bucket Lid is the perfect lid for your YETI LoadOut® bucket\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYETI LoadOut® Bucket Lid for the \"LoadOut® Bucket\"\u003c\/strong\u003e is a must-have accessory for car care and washing. This lid brings a bunch of benefits that make your detailing routine easier and smoother.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof and waterproof\u003c\/strong\u003e: the lid keeps your cleaners and gear reliably safe from damp and the weather.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged build\u003c\/strong\u003e: thanks to the HeftHex™ honeycomb structure, the lid shrugs off extreme temperatures and takes up to 140 kg of load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to handle\u003c\/strong\u003e: the see-through lid pops off easily and gets you quick access to what's in the bucket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eKeeps your car care products safe\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eYETI LoadOut® Bucket Lid\u003c\/strong\u003e is weatherproof and waterproof, which makes it spot-on for car care. Rain or shine, your cleaners and care products stay dry and protected. That means you can leave your \"LoadOut® wash bucket\" outside without a second thought about what's inside. The tight seal also keeps dirt and dust out, which really matters if you want your care products to stay in good shape.\u003c\/p\u003e\n\u003ch3\u003eRugged, long-lasting build\u003c\/h3\u003e\n\u003cp\u003eThe tough HeftHex™ honeycomb structure means the lid holds up even under the harshest conditions. With a load rating of up to 140 kg, you can count on the lid not cracking or splitting, even when you put it through the wringer. That comes in handy when you want to use the bucket as a seat or a work surface. The lid stays stable and solid, so you've always got a reliable spot to work from.\u003c\/p\u003e\n\u003ch3\u003eEasy handling and a clear view\u003c\/h3\u003e\n\u003cp\u003eThe see-through lid of the \u003cstrong\u003eYETI LoadOut® Bucket Lid\u003c\/strong\u003e lets you glance at what's in your bucket any time, without having to open it. That saves time and makes the job easier, since you can see at once whether you've got everything you need. On top of that, the lid comes off easily, so you can grab your gear the moment you need it. All of this makes the lid a real must-have for car care.\u003c\/p\u003e","brand":"YETI","offers":[{"title":"Clear \/ LoadOut® Bucket","offer_id":49130230382927,"sku":"D1-YET-70000000177","price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/YETI-Deckel-fur-LoadOut-Wascheimer-Clear-Transpare-6.png?v=1721822779"},{"product_id":"yeti-loadout-swivel-seat-sitzdeckel-loadout-eimer","title":"Bucket Swivel Seat \/ lid seat for the \"LoadOut® Bucket\"","description":"\u003ch2\u003e\u003cstrong\u003eYETI LoadOut® Swivel Seat — lid seat for the LoadOut® Bucket\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYETI LoadOut® Swivel Seat\u003c\/strong\u003e is the ideal \u003cstrong\u003elid seat\u003c\/strong\u003e for your \u003cstrong\u003eLoadOut® Bucket\u003c\/strong\u003e. This lid seat gives you a stable, comfy spot to sit and makes your LoadOut® Bucket far more versatile. Perfect for outdoor trips, fishing or camping, the Swivel Seat turns a full 360 degrees, so you get flexibility and comfort in one go. Built from tough materials, it holds up and stays reliable in any setting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComfy seat\u003c\/strong\u003e: padded top for more comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-degree turn\u003c\/strong\u003e: gives you flexibility and room to move.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough build\u003c\/strong\u003e: made from durable materials for a long life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e360-degree turn for maximum flexibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eYETI LoadOut® Swivel Seat\u003c\/strong\u003e gives you a full 360-degree turn. That lets you move around freely and look in any direction without getting up off the seat. Ideal for anglers who want to keep an eye on everything around them.\u003c\/p\u003e\n\u003ch3\u003eComfort that lasts\u003c\/h3\u003e\n\u003cp\u003eWith its padded seating surface, the Swivel Seat keeps you comfortable wherever you are. Whether you're fishing, camping or just kicking back outdoors, this lid seat turns your LoadOut® wash bucket into the perfect place to sit.\u003c\/p\u003e\n\u003ch3\u003eTough build for outdoor use\u003c\/h3\u003e\n\u003cp\u003eThe lid seat is made from hard-wearing materials that stand up to the roughest conditions. Rain, sun or rough ground — the Swivel Seat stays tough and reliable.\u003c\/p\u003e\n\u003c!----\u003e","brand":"YETI","offers":[{"title":"Black \/ LoadOut® Bucket","offer_id":49405494919503,"sku":"D1-YET-70000002661","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/W-site_studio_hard_goods_Loadout_Bucket_SwivelSeat_Black_3qter_11334_Primary_B_2400x2400_2f45c4f8-c5eb-48df-9892-04be6b96621b.png?v=1722602121"},{"product_id":"meguiars-snap-on-bucket-lid","title":"Snap On Bucket Lid","description":"\u003ch2\u003eMeguiar's Snap On Bucket Lid — the bucket lid for a safe two-bucket system and proper wash-bucket organisation\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eFrequently asked:\u003c\/strong\u003e “I always wash my car with the two-bucket system, but on the way there wash water sloshes into the boot and dirt drops into the clean water from above. Is there a proper lid for the Meguiar's bucket that actually holds?”\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe Meguiar's Snap On Bucket Lid is the \u003cstrong\u003ebucket lid\u003c\/strong\u003e made for the Meguiar's wash-bucket system — it seals the bucket tight, stops splashes on the move, keeps your wash water free of contamination, and the snap mechanism clicks shut even with wet hands. For the two-bucket system, the backbone of scratch-free car washing, a reliable lid isn't a nice-to-have; it's a working part of the setup. For 6.00 EUR you get a precisely moulded accessory that fits Meguiar's standard buckets exactly — no improvising, no fiddling, no jamming or slipping. Anyone who's ever had a bucket tip over in the boot knows it: the 6 EUR for this lid was the best money spent on wash day.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA secure snap closure that stays put in transit:\u003c\/strong\u003e The snap closure clicks in evenly all the way round the bucket rim and holds firm even when you carry it tilted or knock it about a bit. No sliding as you carry it from the boot to the wash spot, no popping open over bumps and rough ground. You close it with wet or sudsy hands by pressing down evenly, and open it by levering up at the side — no tools, no force.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeeps wash water clean between jobs:\u003c\/strong\u003e With the two-bucket system, clean shampoo water is what keeps swirls off the paint. Leaves, drifting dust, insects or splashes from the rinse bucket next to it can all foul the wash water. With the lid on, everything that doesn't belong stays out — between panels, in transit, and while the bucket sits during a break.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA sturdy seat and a place to set your kit:\u003c\/strong\u003e The lid's flat, solid top takes the weight of a seated adult, so it doubles as a low stool while you work the lower parts of the car — door sills, wheel-arch edges, inner rims. At the same time it gives you a set spot for spray bottles, microfibre cloths and applicators right next to where you're working.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Keep the lid on while you carry the bucket to the wash spot — that way your pre-mixed shampoo water stays free of road dust and boot grime. On a proper two-bucket setup, cap both buckets, one lid each. It also makes stacking for transport easy: two capped buckets go one on top of the other, no spillage, no tipping risk. After wash day, give the buckets a quick rinse, snap the lids on and store them upright to save space — so your kit stays tidy and ready to grab for the next session.\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe two-bucket system — why the right lid protects your wash hygiene\u003c\/h3\u003e\n\n\u003cp\u003eAmong detailers, the two-bucket system counts as the single most important step towards scratch-free washing. The idea is as simple as it is effective: one bucket holds shampoo water for the wash mitt, a second holds clean water to rinse the mitt between panels. That way the dirt the mitt picks up gets dropped in the rinse bucket instead of going back into the shampoo water — the number-one cause of wash swirls is gone.\u003c\/p\u003e\n\n\u003cp\u003eWhat undermines the system: dirt from outside. If leaves, dust, insects or coarse grit drop into the shampoo water — while you're working the other side of the car, during a quick break, or in transit — the water is contaminated. The next time you dunk the mitt it picks those particles up and drags them across the paint. That's exactly where the lid earns its keep: it's the physical barrier that keeps the system intact.\u003c\/p\u003e\n\n\u003cp\u003eSounds like a detail — day-to-day it isn't. Wash early in the morning with pollen and dust still hanging in the air, on a windy day, next to a building site, or in a garage where dust from other jobs is floating around, and you'll be glad of the lid. Clean wash water from the first mitt dunk to the last is no accident — it comes from a consistent routine, and a good lid is part of that.\u003c\/p\u003e\n\n\u003cp\u003eIf you haul your kit in a boot or a van, the seal matters even more. Even a half-full bucket with no lid turns into a hazard under braking or through corners. A bucket with the lid snapped firmly shut stays sealed, even when it tips more than you'd like on the way.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use the Meguiar's Snap On Bucket Lid properly\u003c\/h3\u003e\n\n\u003cp\u003ePutting it on: set the lid centred on the bucket and press down evenly from one side to the other until the snap closure locks in all the way round. You'll hear and feel it click home — a solid click at every point of the rim. Quick test: tilt the bucket slightly — the lid shouldn't shift or come loose. If it still moves, press down evenly once more.\u003c\/p\u003e\n\n\u003cp\u003eTaking it off: lever up gently at one side, or nudge it sideways until the closure releases. Two hands on opposite sides is easiest, especially with wet hands. Don't yank it off from one side — that wears out the snap closure over time. Easing it off gently and evenly is kinder to the mechanism and makes it last a lot longer.\u003c\/p\u003e\n\n\u003cp\u003eStacking: put the lid on bucket 1 and stand bucket 2 on top. The flat surface gives plenty of footing for a stable stack. One thing to watch: don't overfill the top bucket if you're transporting them stacked — a very heavy load can push the lid in or force it out of its seat.\u003c\/p\u003e\n\n\u003cp\u003eAs a seat: with the lid on the bucket, use it as a low stool. The bucket gives a little under your weight, and the lid itself is sturdy enough for someone to sit on. For working door sills, wheels or the lower body, it's a far comfier position than kneeling on concrete the whole time.\u003c\/p\u003e\n\n\u003cp\u003eStorage: snap the lid on and stand the bucket upright. Stacked, it saves space in the garage or the boot. One thing to watch: if you store them outside, don't let puddles sit on the lid — standing water can crack the plastic in a frost if it freezes under the stacked bucket.\u003c\/p\u003e\n\n\u003ch3\u003eThe complete Meguiar's wash-bucket system — bucket lid, Grit Guard and bucket\u003c\/h3\u003e\n\n\u003cp\u003eThe Snap On Bucket Lid is one part of a three-piece system that together makes proper two-bucket washing possible. The first part is the bucket itself — the tough Meguiar's bucket with a scale, a handle and the right rim for the snap closure. The second part is the \u003ca href=\"https:\/\/www.detailing1.de\/products\/meguiars-grit-guard-eimereinsatz\"\u003eGrit Guard bucket insert\u003c\/a\u003e — a grid that sits on the bottom of the bucket and holds the dirt that settles out during rinsing down low. When you dunk the mitt back in after rinsing, the water moves but the grit stays put at the bottom, because the grid physically holds it back.\u003c\/p\u003e\n\n\u003cp\u003eThe third part is the bucket lid — it closes the system off and secures it between jobs, in transit and in storage. Put all three together and you've got a complete, professional wash-bucket system that designs out the main causes of wash swirls: the Grit Guard keeps grit down, the lid keeps dirt out, clean water stays clean.\u003c\/p\u003e\n\n\u003cp\u003eThe same logic applies to the other half of the system — the rinse bucket. It benefits just as much from a Grit Guard insert that keeps rinsed-off dirt on the bottom and a lid that keeps it sealed shut in transit. So the ideal is two complete sets: bucket, Grit Guard and Snap On Bucket Lid.\u003c\/p\u003e\n\n\u003ch3\u003eProduct comparison \u0026amp; buying advice — Snap On Bucket Lid vs. a universal lid\u003c\/h3\u003e\n\n\u003cp\u003eThe Meguiar's Snap On Bucket Lid is moulded to fit Meguiar's buckets exactly. Next to the universal bucket lids from the DIY store — which often only work on standard buckets and jam, won't click in, or sit loose on anything special — the Meguiar's lid gives you a guaranteed fit with no faffing about. No bending it to shape, no makeshift tape, no rubber band — just put it on, click it in, done.\u003c\/p\u003e\n\n\u003cp\u003eIf you're already running the \u003ca href=\"https:\/\/www.detailing1.de\/products\/meguiars-gold-class-car-wash-shampoo-conditioner\"\u003eMeguiar's Gold Class Car Wash Shampoo\u003c\/a\u003e or other Meguiar's wash products in a two-bucket system, the Snap On Bucket Lid is the logical next piece. That rounds the system off and matches the standard pro detailers use day in, day out. At 6.00 EUR for something that improves transport, storage and wash hygiene all at once, there's no real argument against it.\u003c\/p\u003e\n\n\u003cp\u003eIf you're building the system from scratch, here's the starter setup we'd suggest for a two-bucket wash: two Meguiar's buckets, two Grit Guard inserts, two Snap On Bucket Lids — one each for the shampoo water and the rinse water. That gives you a complete, professional setup, and for a total outlay that stays easy to swallow.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial quality and caring for the bucket lid\u003c\/h3\u003e\n\n\u003cp\u003eThe Snap On Bucket Lid is made from high-grade, impact-resistant polypropylene — the same material used for food containers and technical gear. It's UV-resistant, which means the lid won't fade, go brittle or lose its shape even with regular outdoor use on sunny days. Cheap plastic would be cracking after a season — you won't see that with the Meguiar's lid.\u003c\/p\u003e\n\n\u003cp\u003eCleaning: give it a quick rinse with clean water after every use. Wipe off shampoo or wax residue with a damp cloth. For stubborn build-up, a mild all-purpose cleaner (APC) can be sprayed on and wiped off. Don't clean the lid with harsh solvents or wheel cleaners — they can attack the surface or eat into the plastic.\u003c\/p\u003e\n\n\u003cp\u003eWinter storage: if you store it outdoors in freezing weather, make sure the lid is dry. Water that freezes under the lid puts mechanical strain on the snap closure as it expands. Best to keep it somewhere frost-free over winter and store the buckets dry.\u003c\/p\u003e\n\n\u003cdiv class=\"faq-section\"\u003e\n\u003ch3\u003eFrequently asked questions about the Meguiar's Snap On Bucket Lid\u003c\/h3\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the lid fit all Meguiar's buckets?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the Snap On Bucket Lid is moulded to fit the standard Meguiar's bucket range. On buckets from other makers the fit can vary, since bucket diameters and rim shapes differ. If in doubt, check with your dealer.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I sit on the lid?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the lid is sturdy enough for a seated adult. It works well as a low stool when you're working door sills, wheels or other low parts of the car.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I get the lid off with wet hands?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBest to lift gently at two opposite sides at once until the snap closure releases. Levering from one side with a single hand is harder when your hands are wet — two hands make it much easier.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I stack two buckets with the lid?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the flat lid gives a stable surface for a second bucket. That lets you store two buckets one on top of the other to save space in the boot or the garage. Just make sure the stacked bucket isn't filled too heavy.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need a separate lid for each bucket?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFor the two-bucket system we'd suggest two lids — one for the shampoo bucket and one for the rinse bucket. That's the only way both buckets get the protection in transit and in storage.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Meguiars","offers":[{"title":"1 piece","offer_id":57344841449807,"sku":"D1-MEG-RG204","price":5.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Meguiars-Snap-On-Bucket-Lid-Eimerdeckel-1-Stuck_PS1.jpg?v=1775376460"}],"url":"https:\/\/detailing1.co.uk\/collections\/eimerdeckel.oembed","provider":"Detailing1","version":"1.0","type":"link"}