{"title":"Trim care by Dr. Wack \"A1\"","description":null,"products":[{"product_id":"dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-glaenzend","title":"A1 \"Kunststoff-Tiefenpfleger\" Trim care (gloss)","description":"\u003ch2 id=\"speakable-headline\"\u003eFaded bumpers and trim strips come back glossy black with the A1 trim dressing\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Dr. Wack A1 \"Kunststoff-Tiefenpfleger\" in gloss? A colour refresher for plastic, rubber and vinyl that brings faded black back on bumpers, trim strips and wheel arch liners and, according to the manufacturer, stands up particularly well to rain and car washes. Keep it off glass, paint, the tyre tread and the interior controls.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe gloss trim dressing from Dr. Wack\u003c\/strong\u003e is car plastic care made at the factory in Baar-Ebenhausen, designed for every exterior and interior plastic, rubber and vinyl surface on the vehicle. You dose it onto a cloth or a fine-pored sponge, never onto the part itself. After about 5 minutes you wipe over it. What stays behind is a film with UV protection and an antistatic effect.\u003c\/p\u003e\n\n\u003cp\u003eThat a grey part can turn black again is something you see at every wash. Wet, the bumper is jet black; as it dries, the black retreats into grey. Over the years before, the part didn't lose any colour, it lost a smooth surface. Rain, road salt and above all UV radiation break down the top layers of the plastic and leave it microscopically rough.\u003c\/p\u003e\n\n\u003cp\u003eA rough surface scatters light in every direction instead of bouncing it back in one beam. The gloss level drops, and that's exactly what your eye reads as a grey haze. Water fills that roughness for a few minutes and makes the surface look smooth again. The A1 gloss does the same, except it stays put once it's dry. In day-to-day terms: the black you see on the wet part is the black you get.\u003c\/p\u003e\n\n\u003cp\u003eRunning in parallel is the second ageing process, which Dr. Wack names in its own product information sheet. Over the years plastic loses its plasticisers and turns brittle. The dressing works against that preventively, because according to the manufacturer it soaks in rather than just sitting on top, and it brings UV protection along. It doesn't undo anything. If you wait until the wheel arch trim cracks at the edge, you're treating a part that crossed that line long ago.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTested on a bumper, not on a dashboard.\u003c\/strong\u003e In 2017 a comparison test at the Kärcher lab in Winnenden took on 16 plastic colour refreshers, applied section by section to the unpainted front bumper of a 1996 Ford Fiesta. The instant effect was measured with a gloss meter, then wash-off resistance over two rain cycles of 10 minutes each. The A1 gloss won with 91 out of 100 points, while most of the field was visibly fading after the first rain cycle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5 minutes dwell time, a second pass after 30 minutes.\u003c\/strong\u003e You apply the dressing sparingly with a cloth or fine-pored sponge, let it soak in for about 5 minutes, then wipe over it. Half an hour later the manufacturer calls for a second coat, and that's the one that delivers the advertised long-term effect. Outside, this step isn't optional: whatever is meant to survive rain and the car wash gets built in the second pass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e250 millilitres cover the exterior trim of a car several times over.\u003c\/strong\u003e It doesn't go on across whole panels like shampoo, but thinly via the applicator, and what you treat is bumpers, trim strips, arch liners and seals rather than entire body sides. User reports put the next round at 2 to 3 months. Dr. Wack doesn't give a coverage figure in millilitres per part, and we won't make one up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The questions we get about the gloss version almost all take the same shape: blotchy, cloudy, glossier in one spot than the next. That's not a product fault, it's what gloss does. A matte surface forgives a lap mark; a glossy one shows it as a shadow stripe. So work part by part rather than hand-width by hand-width: the bumper edge to edge in one go, then the next trim piece. And dose onto the cloth, never onto the part.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDo the trim in one go, not in patches\u003c\/h3\u003e\n\n\u003cp\u003eThe A1 gloss goes onto a clean, dry surface, gets spread sparingly with a cloth or fine-pored sponge and is wiped over with a dry cloth after about 5 minutes.\u003c\/p\u003e\n\n\u003cp\u003eFirst, the surface has to be clean. On trim, meaning the unpainted black plastic parts outside, there's more than dust after a winter: traffic film, road salt residue and wax haze from the last polish. An \u003ca href=\"\/products\/dr-wack-a1-all-in-one-intensivreiniger-aussen-intensivreiniger\"\u003eA1 \"ALL in ONE\" heavy-duty cleaner (exterior)\u003c\/a\u003e takes that off. After that the car needs proper drying time, not just one pass with a drying towel. Every gap and every trim edge still holds water after the wash, and it runs out as you apply, pulling pale streaks right there.\u003c\/p\u003e\n\n\u003cp\u003eThen the part-by-part rule applies. Take the whole bumper, arch to arch, then the sill trim, then the wheel arch liner. Stop halfway and carry on twenty minutes later, and you set an edge between fresh and half-dried product that later shows up as a shadow in raking light.\u003c\/p\u003e\n\n\u003cp\u003eOutside, heat is the underrated enemy. A black trim piece in the midday sun gets hot enough that the product flashes off before it can soak in. That's exactly why the product information sheet rules out direct sun and hot parts. In practice: shady side first, or push the whole job into the early evening.\u003c\/p\u003e\n\n\u003cp\u003eUnder the bonnet the same temperature rule applies, only stricter. Engine covers, the airbox and the scuttle panel are plastic surfaces like any other and are among the spots where greying shows most. Work there on a cold engine, not straight after a drive.\u003c\/p\u003e\n\n\u003ch3\u003eThe gloss brings back the colour, not the material\u003c\/h3\u003e\n\n\u003cp\u003eThe no-go surface closest to hand outside is the tyre tread: a hand's width below the arch liner you're working on. Add glass, painted parts and, inside, controls like the steering wheel and pedals.\u003c\/p\u003e\n\n\u003cp\u003eWe add headlights out of our own conviction. Headlight lenses are an optical surface with the same job as glass, and a dressing film on them scatters light instead of letting it through. You'll notice it straight away with oncoming traffic at night. On the tyre the dividing line is finer than it sounds: the sidewall is a rubber surface like any other, the tread is off limits.\u003c\/p\u003e\n\n\u003cp\u003eThe second limit is more fundamental. The dressing works on the surface and gives it its black back, but it doesn't rebuild material. A scratch stays a scratch, a web of hairline cracks in an old trim piece stays visible, just black instead of grey. And a part that's already so brittle it snaps at the edge won't turn flexible again with any dressing.\u003c\/p\u003e\n\n\u003cp\u003eIn return it scores a point many cheap products miss: the A1 is solvent-free. Solvent-based dressings give instant depth, but they evaporate again and take with them whatever mobile components are still left in the plastic. The upshot: after treatment the part isn't drier than before, it just has one more protective film.\u003c\/p\u003e\n\n\u003cp\u003eThat leads to a clear if-then rule, and it hinges on the factory finish of the part. If the part left the factory glossy, like piano-black trim strips, grille surrounds or smooth trim panels, this version is the right one. If it was delivered grained and matte, like many modern bumper inserts and wheel arch trims, reach for the \u003ca href=\"\/products\/dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-matt\"\u003ematte version of the trim dressing\u003c\/a\u003e, otherwise the part ends up looking like something it never was.\u003c\/p\u003e\n\n\u003cp\u003eAnd a dressing is not a coating. The test measured two rain cycles, not a season. That the A1 barely faded doesn't mean it lasts a year, it means it hangs on longer than most of the others in the same trial.\u003c\/p\u003e\n\n\u003ch3\u003eOut in the open plastic ages, under a roof it barely does\u003c\/h3\u003e\n\n\u003cp\u003eYou'll get the most out of this product if your car lives outside, because there UV and rain work on the trim all year round and the greying comes back fast.\u003c\/p\u003e\n\n\u003cp\u003eOn a car kept under cover and driven twice a month in summer, the same process takes years. There a refresh every few seasons is more honest than a fixed interval, and the 250 ml bottle lasts accordingly. If you're bringing back a ten-year-old car with badly faded trim, on the other hand, plan the second pass after 30 minutes in from the start.\u003c\/p\u003e\n\n\u003cp\u003eOne side effect from the product information sheet is worth more in day-to-day detailing than it sounds: the A1 gloss lifts polish and wax residue off plastic parts. Exactly those white edges that sit in the grain of the bumper and trim after a paint polish and won't come out with a cloth. A job plenty of people buy a separate product for.\u003c\/p\u003e\n\n\u003cp\u003eAntistatic is the second point that plays out differently outside than inside. The surface no longer holds an electrostatic charge for fine dust to cling to. You notice it because the grey traffic film builds up more slowly between two washes and comes off more easily at the next one. If you want to dig further, the \u003ca href=\"\/collections\/kunststoffpflege\"\u003eplastic care\u003c\/a\u003e range also has products built for pure colour depth without the staying power.\u003c\/p\u003e\n\n\u003cp\u003eFinally, the test no manufacturer writes down, and one you should do before you even start. Point the hose at the grey part and look at it wet.\u003c\/p\u003e\n\n\u003cp\u003eIf it turns jet black, the greying is purely optical and down to the roughened surface. That's exactly the state the dressing brings back, and the wet part shows you in advance what the result will look like. If it stays milky grey even when wet, the surface has broken down further than any dressing can make up for. Then you don't need a dressing but mechanical prep or a re-dyeing product, and two minutes with the hose save you a letdown.\u003c\/p\u003e","brand":"Dr. Wack \"A1\"","offers":[{"title":"250ml","offer_id":54707187843407,"sku":"D1-DRW-2780","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/dr-wack-a1-kunststoff-tiefenpfleger-glaenzend-kunststoffpflege.png?v=1787867254"},{"product_id":"dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-matt","title":"A1 \"Kunststoff-Tiefenpfleger\" Trim Care (Matt)","description":"\u003ch2 id=\"speakable-headline\"\u003eThe Kunststoff-Tiefenpfleger matt brings the colour back without putting a reflection in the screen\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Dr. Wack A1 \"Kunststoff-Tiefenpfleger\" matt? A colour refresh for plastic, rubber and vinyl inside and out that dries down matt and, the manufacturer says, cuts reflections of the dashboard in the windscreen. Not suitable for glass, painted parts, tyre treads or controls such as the steering wheel and pedals.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKunststoff-Tiefenpfleger matt\u003c\/strong\u003e is a trim care product from Dr. Wack, made at the plant in Baar-Ebenhausen, for every interior and exterior plastic, rubber and vinyl surface on the car. You dose it onto a cloth and not onto the part, then it soaks in for around 5 minutes and gets wiped off. What stays behind is an antistatic film with a UV filter that scatters light instead of bouncing it back.\u003c\/p\u003e\n\n\u003cp\u003eBehind that sit two ageing processes that Dr. Wack names in its own product information sheet. Over the years plastic loses its plasticisers, the small mobile molecules that sit between the long chain molecules and let them slide past each other. Once those have evaporated, chain rubs on chain, the part goes hard and sooner or later it splits at the edge.\u003c\/p\u003e\n\n\u003cp\u003eAt the same time UV light cracks the colour pigments open, and black turns into that washed-out grey. The Kunststoff-Tiefenpfleger matt works against both: the manufacturer says it soaks into the plastic rather than just sitting on top, and it brings a UV filter with it. Day-to-day that means you are not treating the grey haze, you are treating what makes it.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMatt here is not a taste, it is scatter.\u003c\/strong\u003e A matt surface throws light off in every direction, a glossy one bundles it — and that bundle is exactly what a steeply raked windscreen sends back into your field of view. That is why carmakers ship dashboards grained and dark. Two of the eight product benefits in the information sheet turn on this point: the reduced reflection and the explicit approval for plastics that are already matt.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive minutes working in the material, not on it.\u003c\/strong\u003e You lay it on sparingly through a cloth or a fine-pored sponge, then come 5 minutes of dwell time and the wipe-off. Those five minutes are the difference between colouring the plastic and coating it: whatever has not soaked in by then belongs in the towel, not on the dashboard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo bottles for two ranges.\u003c\/strong\u003e The small 50 ml bottle is the size for one car interior and for anyone who first wants to see how matt matt really looks on their plastic. The big one holds 250 ml, five times as much, and covers bumpers, arch trims and exterior mouldings on top. Inside, users report 2 to 3 months before the next round.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e We get a lot of questions about why the plastic looks streaky or greasy after treatment. Nearly always the same step is missing. Wiping down after the five minutes is not cosmetic, it is what creates the matt finish in the first place. Whatever has not soaked in during the dwell time is sitting on top as a film, and that film shines, goes tacky and pulls in dust. Take it off with a dry, clean towel, not with the one you applied with.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe five minutes belong to the plastic, the rest belongs to the towel\u003c\/h3\u003e\n\n\u003cp\u003eOn a dusty panel, all your cloth spreads around is dust. The Kunststoff-Tiefenpfleger matt belongs on a clean, dry surface, and it goes onto the cloth, never onto the part.\u003c\/p\u003e\n\n\u003cp\u003eSo clean it first. An \u003ca href=\"\/products\/dr-wack-a1-all-in-one-innenraumreiniger-glasreiniger\"\u003einterior and glass cleaner\u003c\/a\u003e pulls dust, the greasy film from fingers and nicotine residue off the surface, and then it has to dry. Put the conditioner on damp material and you thin it out and get clouds instead of an even panel.\u003c\/p\u003e\n\n\u003cp\u003eThen dose it sparingly onto a soft, absorbent cloth or a fine-pored sponge and lay it on evenly. Let it dwell for 5 minutes — that is when the actual work happens, the rest of the time you are only waiting. Then wipe down with a second, dry towel until the surface comes back flat.\u003c\/p\u003e\n\n\u003cp\u003eFor the full long-term effect Dr. Wack recommends a second round after about 30 minutes. That is the step almost nobody does, and it costs barely any product: the plastic is largely saturated from the first pass, so the second coat only fills the spots that came up short.\u003c\/p\u003e\n\n\u003cp\u003eTwo conditions come as notes in the product information sheet: no direct sun, no heated-up surface. A dashboard that has stood in the sun all morning is hot enough to dry the conditioner off before it can soak in. Then the film sits on top and you are back at the streak problem.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-matt_anwendung.jpg?v=1787867852\u0026amp;width=1400\" alt=\"Dr. Wack A1 Kunststoff-Tiefenpfleger matt with a folded microfibre towel on the centre console\" loading=\"lazy\" decoding=\"async\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eThe conditioner has no business on the steering wheel or the pedals\u003c\/h3\u003e\n\n\u003cp\u003eDr. Wack rules out four surfaces outright: glass, painted parts, tyre treads and controls such as the steering wheel and pedals. With the last two it is not about the material, it is about grip.\u003c\/p\u003e\n\n\u003cp\u003eThe film that keeps dust off also lowers friction. On a steering wheel rim or a brake pedal that is the wrong property, because your hand and your shoe need to hold on there. The same thinking goes for the gear lever, the handbrake grip and the floor mats, even if those are not named in the exclusion.\u003c\/p\u003e\n\n\u003cp\u003eGlass is just as much off limits. Nothing soaks in there, the film stays put and in backlight it produces exactly the smears you set out to get rid of. On the tyre the dividing line is finer than it sounds: the sidewall is a rubber surface like any other, the tread is explicitly excluded.\u003c\/p\u003e\n\n\u003cp\u003eThen the honest read from the lab. Auto Bild put nine plastic conditioners up against each other on colour refresh, durability over five washes, water repellency and material compatibility. The matt A1 won the test with a grade of 1.5, and it picked up its points mainly on wash durability and material compatibility. Another product in the same field refreshed the colour more strongly.\u003c\/p\u003e\n\n\u003cp\u003eThat gives you a clean if-then rule. If a part has to stay matt, so dashboard, door cards, grained and already matt plastics, you take this version. If you want maximum colour depth on black trim, on the unpainted plastic of bumpers, wheel arches and mouldings, and the gloss level there is not an issue, the \u003ca href=\"\/products\/dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-glaenzend\"\u003eglossy version of the conditioner\u003c\/a\u003e is the better tool.\u003c\/p\u003e\n\n\u003cp\u003eAnd a limit in the other direction: the conditioner makes nothing matt that left the factory glossy. It simply adds no gloss of its own, that is all. So a piano-black panel on the centre console stays glossy, however often you work it.\u003c\/p\u003e\n\n\u003ch3\u003eInside, dust decides how long it lasts, not the rain\u003c\/h3\u003e\n\n\u003cp\u003eThe long-term effect Dr. Wack advertises is an outdoor figure. It describes how many wet drives and car washes the film survives. Inside the cabin, neither of those two is attacking it.\u003c\/p\u003e\n\n\u003cp\u003eIndoors, dust decides. Antistatic means the surface no longer holds the electrostatic charge that dust clings to. You notice it because the grey haze comes back more slowly and lifts off dry, instead of you having to turn up with a damp cloth again. Users report two to three months before the next round is due.\u003c\/p\u003e\n\n\u003cp\u003eOutside the maths is different. On black trim, rain, road salt and car washes work against the film, and that is exactly where the test measured durability. One special case is in the product information sheet as well: the Kunststoff-Tiefenpfleger matt lifts polish and wax residue off plastic parts. If you have white edges sitting on the bumper after a polish, this is the tool for them.\u003c\/p\u003e\n\n\u003cp\u003eWho actually gains from it: drivers whose cockpit catches more sun than the rest of the car, so convertibles and anything that lives outdoors. And anyone driving into a low sun morning or evening. In December the sun here sits less than 15 degrees above the horizon at midday, its light hits the windscreen at almost a grazing angle, and then the gloss level of the dashboard is part of what decides how much you see.\u003c\/p\u003e\n\n\u003cp\u003eIf you wipe the inside of your car out twice a year and live with the grey, you do not need the deep action and will find simpler options in \u003ca href=\"\/collections\/kunststoffpflege\"\u003etrim care\u003c\/a\u003e. And if your cockpit is piano black and display surfaces, you are only treating the grained parts around them anyway.\u003c\/p\u003e\n\n\u003cp\u003eFinally, the test no manufacturer writes down: judge the result on the windscreen, not on the dashboard. Straight after the wipe-down every treated surface looks good, from above, under cabin light, from half a metre away.\u003c\/p\u003e\n\n\u003cp\u003eWhether too much product stayed behind only shows from the driver's seat, looking into the light. Sit in and look for the outline of the dashboard in the screen. If it is there, one pass with the dry towel is missing. If it is gone, you worked clean.\u003c\/p\u003e","brand":"Dr. Wack \"A1\"","offers":[{"title":"250ml","offer_id":54707188498767,"sku":"D1-DRW-2770","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"50 ml","offer_id":58584740233551,"sku":"D1-DRW-2773","price":5.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/dr-wack-a1-kunststoff-tiefenpfleger-kunststoffpflege-matt.png?v=1787867264"}],"url":"https:\/\/detailing1.co.uk\/collections\/dr-wack-a1-kunststoffpflege.oembed","provider":"Detailing1","version":"1.0","type":"link"}